[srslte-users] How to send user plane packets using srsUE ?

[Hechengdong (Dony He)]

Hi, Ismael:
        Thanks for your help. Now it woks ok.

       Another question: Each time when my srsUE attaches to the network successfully, after 35 seconds the eNodeB will send a “UE context release request” message to the MME, which is trigger to send a “release access bearers request” message to the sgw  .  Does somebody know why?
       Thanks.

________________________________
Best regards,
Dony He (何承东)
华为技术有限公司 Huawei Technologies Co., Ltd.
[Company_logo]

Phone:
Fax:
Mobile: 18688780450
Email:
地址：深圳市龙岗区坂田华为基地B2楼 邮编：518129
Huawei Technologies Co., Ltd.
Bantian, Longgang District,Shenzhen 518129, P.R.China
http://www.huawei.com
________________________________
本邮件及其附件含有华为公司的保密信息，仅限于发送给上面地址中列出的个人或群组。禁
止任何其他人以任何形式使用（包括但不限于全部或部分地泄露、复制、或散发）本邮件中
的信息。如果您错收了本邮件，请您立即电话或邮件通知发件人并删除本邮件！
This e-mail and its attachments contain confidential information from HUAWEI, which
is intended only for the person or entity whose address is listed above. Any use of the
information contained herein in any way (including, but not limited to, total or partial
disclosure, reproduction, or dissemination) by persons other than the intended
recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender by
phone or email immediately and delete it!

发件人: Ismael Gomez [mailto:ismael.gomez at softwareradiosystems.com]
发送时间: 2016年7月4日 15:54
收件人: Hechengdong (Dony He); srslte-users at lists.softwareradiosystems.com
主题: Re: [srslte-users] How to send user plane packets using srsUE ?

Hi Dony He,

To access the internet or the network behind the P-GW you just have to add the P-GW IP address as a new route in the linux kernel, e.g. "route add net default gw <p_gw_ip_addr>". Also you might need to configure the DNS manually.

There are two tools to capture the packets over the air:
- Packet captures that can be dissected by Wireshark. Enable option in [pcap] section in the ue.conf
- Text format logs for each layer. Section [log] of the ue.conf

best regards,
Ismael

On Mon, 4 Jul 2016 at 09:18 Hechengdong (Dony He) <dony.he at huawei.com<mailto:dony.he at huawei.com>> wrote:
Hi,all:
   Now our srsUE can attach the network successfully. How can I send user plane packets using srsUE? Are there any demo codes? Are there any tools to capture the packets over the air interface?

   Thanks.

Best regards,
Dony He (何承东)
华为技术有限公司 Huawei Technologies Co., Ltd.


Phone:
Fax:
Mobile: 18688780450
Email:
地址：深圳市龙岗区坂田华为基地B2楼 邮编：518129
Huawei Technologies Co., Ltd.
Bantian, Longgang District,Shenzhen 518129, P.R.China
http://www.huawei.com

本邮件及其附件含有华为公司的保密信息，仅限于发送给上面地址中列出的个人或群组。禁
止任何其他人以任何形式使用（包括但不限于全部或部分地泄露、复制、或散发）本邮件中
的信息。如果您错收了本邮件，请您立即电话或邮件通知发件人并删除本邮件！
This e-mail and its attachments contain confidential information from HUAWEI, which
is intended only for the person or entity whose address is listed above. Any use of the
information contained herein in any way (including, but not limited to, total or partial
disclosure, reproduction, or dissemination) by persons other than the intended
recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender by
phone or email immediately and delete it!

_______________________________________________
srslte-users mailing list
srslte-users at lists.softwareradiosystems.com<mailto:srslte-users at lists.softwareradiosystems.com>
http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20160706/c24d2b74/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 6737 bytes
Desc: image001.jpg
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20160706/c24d2b74/attachment.jpg>