[srslte-users] Fwd: Help with your code

Ismael Gomez ismael.gomez at softwareradiosystems.com
Tue Mar 22 16:39:12 UTC 2016 

Can you use the tool usrp_capture_sync to capture a few frames (eg 100-200)
and share it in Dropbox? I'll take a look at it as soon as I have a chance

On Tue, 22 Mar 2016 at 16:55 John Sfox <sfoxsfoxjohn at gmail.com> wrote:

> If I can provide you something to clarify this environment....
> ....output, data acquisition, ....
>
> On Tue, Mar 22, 2016 at 4:36 PM, Ismael Gomez <
> ismael.gomez at softwareradiosystems.com> wrote:
>
>> No it's not. It just helps to debug what's happening.
>>
>> On Tue, 22 Mar 2016 at 16:36 John Sfox <sfoxsfoxjohn at gmail.com> wrote:
>>
>>> At the moment I'm not using the graphical part.
>>> Do you think it is necessary?
>>>
>>> On Tue, Mar 22, 2016 at 4:13 PM, Ismael Gomez <
>>> ismael.gomez at softwareradiosystems.com> wrote:
>>>
>>>> Do you see a clear constellation in the plots?
>>>>
>>>> On Tue, 22 Mar 2016 at 16:04 John Sfox <sfoxsfoxjohn at gmail.com> wrote:
>>>>
>>>>> Ok!
>>>>> But using
>>>>> ./pdsch_ue -f valueFreqeuncy
>>>>>
>>>>> this is the result
>>>>> ......
>>>>>  Found Cell_id:   0 CP: Normal  , DetectRatio= 0% PSR=0.00, Power=-inf
>>>>> dBm
>>>>> *Found Cell_id: 424 CP: Normal  , DetectRatio=100% PSR=13.16,
>>>>> Power=44.8 dBm
>>>>>  Found Cell_id: 425 CP: Normal  , DetectRatio=91% PSR=10.35,
>>>>> Power=44.0 dBm
>>>>>
>>>>> Decoding PBCH for cell 424 (N_id_2=1)
>>>>> ....
>>>>>
>>>>>
>>>>> Setting sampling rate 15.36 MHz
>>>>>  - Cell ID:         424   1.3, FrameCnt: 0, State: 1
>>>>>
>>>>>  - Nof ports:       2
>>>>>  - CP:              Normal
>>>>>  - PRB:             50
>>>>>  - PHICH Length:    Normal
>>>>>  - PHICH Resources: 1
>>>>>  - SFN:             780
>>>>> Decoded MIB. SFN: 780, offset: 1
>>>>> CFO:  +2.65 KHz, SNR: -nan dB, PDCCH-Miss:  -nan%, PDSCH-BLER:  -nan%
>>>>> CFO:  +2.45 KHz, SNR: -nan dB, PDCCH-Miss:  -nan%, PDSCH-BLER:  -nan%
>>>>> CFO:  +2.29 KHz, SNR: -nan dB, PDCCH-Miss:  -nan%, PDSCH-BLER:  -nan%
>>>>> CFO:  +2.16 KHz, SNR: 15.5 dB, PDCCH-Miss: 100.00%, PDSCH-BLER:  -nan%
>>>>> CFO:  +2.05 KHz, SNR: 15.5 dB, PDCCH-Miss: 100.00%, PDSCH-BLER:  -nan%
>>>>> CFO:  +1.96 KHz, SNR: 15.5 dB, PDCCH-Miss: 100.00%, PDSCH-BLER:  -nan%
>>>>> CFO:  +1.89 KHz, SNR: 15.5 dB, PDCCH-Miss: 100.00%, PDSCH-BLER:  -nan%
>>>>> CFO:  +1.83 KHz, SNR: 15.5 dB, PDCCH-Miss: 100.00%, PDSCH-BLER:  -nan%
>>>>> CFO:  +1.79 KHz, SNR: 15.5 dB, PDCCH-Miss: 100.00%, PDSCH-BLER:  -nan%
>>>>> CFO:  +1.74 KHz, SNR: 15.5 dB, PDCCH-Miss: 100.00%, PDSCH-BLER:  -nan%
>>>>> CFO:  +1.72 KHz, SNR: 15.5 dB, PDCCH-Miss: 100.00%, PDSCH-BLER:  -nan%
>>>>> CFO:  +1.70 KHz, SNR: 15.7 dB, PDCCH-Miss: 100.00%, PDSCH-BLER:  -nan%
>>>>> CFO:  +1.68 KHz, SNR: 15.7 dB, PDCCH-Miss: 100.00%, PDSCH-BLER:  -nan%
>>>>> CFO:  +1.66 KHz, SNR: 15.7 dB, PDCCH-Miss: 100.00%, PDSCH-BLER:  -nan%
>>>>> CFO:  +1.65 KHz, SNR: 15.7 dB, PDCCH-Miss: 100.00%, PDSCH-BLER:  -nan%
>>>>> CFO:  +1.63 KHz, SNR: 15.7 dB, PDCCH-Miss: 100.00%, PDSCH-BLER:  -nan%
>>>>> CFO:  +1.62 KHz, SNR: 15.7 dB, PDCCH-Miss: 100.00%, PDSCH-BLER:  -nan%
>>>>> CFO:  +1.63 KHz, SNR: 15.7 dB, PDCCH-Miss: 100.00%, PDSCH-BLER:  -nan%
>>>>> ^CSIGINT received. Exiting...
>>>>>
>>>>>
>>>>> On Tue, Mar 22, 2016 at 3:55 PM, Ismael Gomez <
>>>>> ismael.gomez at softwareradiosystems.com> wrote:
>>>>>
>>>>>> No, to run pdsch_ue against a public LTE cell you only need to run:
>>>>>>
>>>>>> ./pdsch_ue -f valueFreqeuncy
>>>>>>
>>>>>> and optionally -g gainValue
>>>>>>
>>>>>>
>>>>>> On Tue, 22 Mar 2016 at 15:55 John Sfox <sfoxsfoxjohn at gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> ./pdsch_ue -f valueFreqeuncy or
>>>>>>> ./pdsch_ue -f valueFreqeuncy -p NumberOfRB -P numberOfPort -c cellId
>>>>>>> -g gainValue
>>>>>>>
>>>>>>> I used several combinations from the minimum (only frequency value)
>>>>>>> or
>>>>>>> plus gain Value, number of resource blocks, cell Id, numer of ports
>>>>>>> etc.
>>>>>>>
>>>>>>> The result is always the same that I posted before.
>>>>>>>
>>>>>>> Thanks
>>>>>>> John
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Tue, Mar 22, 2016 at 3:40 PM, Ismael Gomez <
>>>>>>> ismael.gomez at softwareradiosystems.com> wrote:
>>>>>>>
>>>>>>>> Looks like it does not found SIB messages. What command are you
>>>>>>>> using to run pdsch_ue?
>>>>>>>>
>>>>>>>> On Tue, 22 Mar 2016, 10:55 John Sfox, <sfoxsfoxjohn at gmail.com>
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> This is the output of pdsch_ue:
>>>>>>>>> .....
>>>>>>>>>
>>>>>>>>> .....
>>>>>>>>> Searching for cell...
>>>>>>>>> Using Volk machine: avx_64_mmx_orc
>>>>>>>>>  Found Cell_id:   0 CP: Normal  , DetectRatio= 0% PSR=0.00,
>>>>>>>>> Power=-inf dBm
>>>>>>>>> *Found Cell_id: 424 CP: Normal  , DetectRatio=51% PSR=10.01,
>>>>>>>>> Power=45.1 dBm
>>>>>>>>>  Found Cell_id:  20 CP: Normal  , DetectRatio=100% PSR=10.15,
>>>>>>>>> Power=33.9 dBm
>>>>>>>>>
>>>>>>>>> Decoding PBCH for cell 424 (N_id_2=1)
>>>>>>>>> -- Asking for clock rate 15.360000 MHz...
>>>>>>>>> -- Actually got clock rate 15.360000 MHz.
>>>>>>>>> -- Performing timer loopback test... pass
>>>>>>>>> -- Performing timer loopback test... pass
>>>>>>>>> Setting sampling rate 15.36 MHz
>>>>>>>>>  - Cell ID:         424   2.6, FrameCnt: 0, State: 1 0
>>>>>>>>>  - Nof ports:       2
>>>>>>>>>  - CP:              Normal
>>>>>>>>>  - PRB:             50
>>>>>>>>>  - PHICH Length:    Normal
>>>>>>>>>  - PHICH Resources: 1
>>>>>>>>>  - SFN:             524
>>>>>>>>> Decoded MIB. SFN: 524, offset: 3
>>>>>>>>> CFO:  +2.67 KHz, SNR: -nan dB, PDCCH-Miss:  -nan%, PDSCH-BLER:
>>>>>>>>> -nan%
>>>>>>>>> CFO:  +2.46 KHz, SNR: 17.0 dB, PDCCH-Miss: 100.00%, PDSCH-BLER:
>>>>>>>>> -nan%
>>>>>>>>> CFO:  +2.29 KHz, SNR: 17.0 dB, PDCCH-Miss: 100.00%, PDSCH-BLER:
>>>>>>>>> -nan%
>>>>>>>>> CFO:  +2.15 KHz, SNR: 17.0 dB, PDCCH-Miss: 100.00%, PDSCH-BLER:
>>>>>>>>> -nan%
>>>>>>>>> CFO:  +2.04 KHz, SNR: 17.0 dB, PDCCH-Miss: 100.00%, PDSCH-BLER:
>>>>>>>>> -nan%
>>>>>>>>> CFO:  +1.95 KHz, SNR: 17.0 dB, PDCCH-Miss: 100.00%, PDSCH-BLER:
>>>>>>>>> -nan%
>>>>>>>>> CFO:  +1.87 KHz, SNR: 17.0 dB, PDCCH-Miss: 100.00%, PDSCH-BLER:
>>>>>>>>> -nan%
>>>>>>>>> CFO:  +1.81 KHz, SNR: 17.0 dB, PDCCH-Miss: 100.00%, PDSCH-BLER:
>>>>>>>>> -nan%
>>>>>>>>> CFO:  +1.76 KHz, SNR: 17.0 dB, PDCCH-Miss: 100.00%, PDSCH-BLER:
>>>>>>>>> -nan%
>>>>>>>>> CFO:  +1.72 KHz, SNR: 18.6 dB, PDCCH-Miss: 100.00%, PDSCH-BLER:
>>>>>>>>> -nan%
>>>>>>>>> CFO:  +1.69 KHz, SNR: 18.6 dB, PDCCH-Miss: 100.00%, PDSCH-BLER:
>>>>>>>>> -nan%
>>>>>>>>> CFO:  +1.67 KHz, SNR: 18.6 dB, PDCCH-Miss: 100.00%, PDSCH-BLER:
>>>>>>>>> -nan%
>>>>>>>>> CFO:  +1.66 KHz, SNR: 18.6 dB, PDCCH-Miss: 100.00%, PDSCH-BLER:
>>>>>>>>> -nan%
>>>>>>>>> CFO:  +1.64 KHz, SNR: 18.6 dB, PDCCH-Miss: 100.00%, PDSCH-BLER:
>>>>>>>>> -nan%
>>>>>>>>> CFO:  +1.62 KHz, SNR: 18.6 dB, PDCCH-Miss: 100.00%, PDSCH-BLER:
>>>>>>>>> -nan%
>>>>>>>>> ^CSIGINT received. Exiting...
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> But related to reference signal (that is what I need to evaluate
>>>>>>>>> the coverage) what do you suggest?
>>>>>>>>>
>>>>>>>>> On Tue, Mar 22, 2016 at 9:34 AM, Ismael Gomez <
>>>>>>>>> ismael.gomez at softwareradiosystems.com> wrote:
>>>>>>>>>
>>>>>>>>>> Have you tried with pdsch_ue tool?
>>>>>>>>>>
>>>>>>>>>> On Tue, 22 Mar 2016 at 08:47 John Sfox <sfoxsfoxjohn at gmail.com>
>>>>>>>>>> wrote:
>>>>>>>>>>
>>>>>>>>>>> Hi Ismael, using cell_search 5 times, it found the cells twice.
>>>>>>>>>>> cell_measurement, found the cell and write:
>>>>>>>>>>>
>>>>>>>>>>> .........
>>>>>>>>>>> Searching for cell...
>>>>>>>>>>> Using Volk machine: avx_64_mmx_orc
>>>>>>>>>>>  Found Cell_id:   0 CP: Normal  , DetectRatio= 0% PSR=0.00,
>>>>>>>>>>> Power=-inf dBm
>>>>>>>>>>> *Found Cell_id: 424 CP: Normal  , DetectRatio=50% PSR=10.01,
>>>>>>>>>>> Power=-7.5 dBm
>>>>>>>>>>>  Found Cell_id:   0 CP: Normal  , DetectRatio= 0% PSR=0.00,
>>>>>>>>>>> Power=-inf dBm
>>>>>>>>>>> Decoding PBCH for cell 424 (N_id_2=1)
>>>>>>>>>>> -- Asking for clock rate 15.360000 MHz...
>>>>>>>>>>> -- Actually got clock rate 15.360000 MHz.
>>>>>>>>>>> -- Performing timer loopback test... pass
>>>>>>>>>>> -- Performing timer loopback test... pass
>>>>>>>>>>> Setting sampling rate 15.36 MHz
>>>>>>>>>>> Finding PSS... Peak:      0.2, FrameCnt: 0, State: 0
>>>>>>>>>>> Finding PSS... Peak:      0.4, FrameCnt: 0, State: 0
>>>>>>>>>>> Finding PSS... Peak:      0.6, FrameCnt: 0, State: 0
>>>>>>>>>>> Finding PSS... Peak:      0.7, FrameCnt: 0, State: 0
>>>>>>>>>>> Finding PSS... Peak:      0.8, FrameCnt: 0, State: 0
>>>>>>>>>>> Finding PSS... Peak:      1.5, FrameCnt: 0, State: 1
>>>>>>>>>>> Decoded MIB. SFN: 888, offset: 3
>>>>>>>>>>> CFO: +2.1863 KHz, SFO: -0.6667 Khz, NOI: 0.00, PDCCH-Det: -nan
>>>>>>>>>>> CFO: +1.9665 KHz, SFO: -0.7895 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.8253 KHz, SFO: -0.6522 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.7310 KHz, SFO: -0.9259 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.6702 KHz, SFO: -0.8065 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.6262 KHz, SFO: -0.7143 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5998 KHz, SFO: -0.6410 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5832 KHz, SFO: -0.8140 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5703 KHz, SFO: -0.7447 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5656 KHz, SFO: -0.6863 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5625 KHz, SFO: -0.8182 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5588 KHz, SFO: -0.7627 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5591 KHz, SFO: -0.7143 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5508 KHz, SFO: -0.8209 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5560 KHz, SFO: -0.7746 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5578 KHz, SFO: -0.7333 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5503 KHz, SFO: -0.6962 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5520 KHz, SFO: -0.7831 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5522 KHz, SFO: -0.7471 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5498 KHz, SFO: -0.7143 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5476 KHz, SFO: -0.7895 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5489 KHz, SFO: -0.7576 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5486 KHz, SFO: -0.7282 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5500 KHz, SFO: -0.7009 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5521 KHz, SFO: -0.7658 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5454 KHz, SFO: -0.7391 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5472 KHz, SFO: -0.7143 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5439 KHz, SFO: -0.7724 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5432 KHz, SFO: -0.7480 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5404 KHz, SFO: -0.7252 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5524 KHz, SFO: -0.7778 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5547 KHz, SFO: -0.7554 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5559 KHz, SFO: -0.7343 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5576 KHz, SFO: -0.7143 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5612 KHz, SFO: -0.7616 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5697 KHz, SFO: -0.7419 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5709 KHz, SFO: -0.7233 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5667 KHz, SFO: -0.7669 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5635 KHz, SFO: -0.7485 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5619 KHz, SFO: -0.7310 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5630 KHz, SFO: -0.7714 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5527 KHz, SFO: -0.7542 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5505 KHz, SFO: -0.7377 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5519 KHz, SFO: -0.7219 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5521 KHz, SFO: -0.7592 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5554 KHz, SFO: -0.7436 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5537 KHz, SFO: -0.7286 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5488 KHz, SFO: -0.7635 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5565 KHz, SFO: -0.7488 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5508 KHz, SFO: -0.7346 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5539 KHz, SFO: -0.7674 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5507 KHz, SFO: -0.7534 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5459 KHz, SFO: -0.7399 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5435 KHz, SFO: -0.7269 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5455 KHz, SFO: -0.7576 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5426 KHz, SFO: -0.7447 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5542 KHz, SFO: -0.7322 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5524 KHz, SFO: -0.7613 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5589 KHz, SFO: -0.7490 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5557 KHz, SFO: -0.7371 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5506 KHz, SFO: -0.7255 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5440 KHz, SFO: -0.7529 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5470 KHz, SFO: -0.7414 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5512 KHz, SFO: -0.7303 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> CFO: +1.5564 KHz, SFO: -0.7380 Khz, NOI: 0.00, PDCCH-Det: 0.000
>>>>>>>>>>> ^CSIGINT received. Exiting...
>>>>>>>>>>>
>>>>>>>>>>> and so on.
>>>>>>>>>>>
>>>>>>>>>>> Thamk you
>>>>>>>>>>> John
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Tue, Mar 22, 2016 at 12:38 AM, Ismael Gomez <
>>>>>>>>>>> ismael.gomez at softwareradiosystems.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Hi John,
>>>>>>>>>>>>
>>>>>>>>>>>> Have you tried the cell_search program in these LTE bands?
>>>>>>>>>>>>
>>>>>>>>>>>> On Fri, 18 Mar 2016 at 09:58 John Sfox <sfoxsfoxjohn at gmail.com>
>>>>>>>>>>>> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> Hi Ismael, thank you for your replay.
>>>>>>>>>>>>> Using a spectrum analyzer of the University, I have collected all
>>>>>>>>>>>>> the cells in the area for 800MHz, 1800MHz e 2200MHz and their
>>>>>>>>>>>>> bandwidths.
>>>>>>>>>>>>> The cells at 800MHz had bandwidth of 10MHz.
>>>>>>>>>>>>> The cells at 1800MHz had bandwidth of 15MHz (1 10MHz)
>>>>>>>>>>>>> The cells at 2200MHz had Bandwidth of 15MHz (1 20MHz).
>>>>>>>>>>>>> Srslte never worked at 800 MHz and at 1800MHz. At 2200MHz, it
>>>>>>>>>>>>> has only worked for a cell with BW 15MHz
>>>>>>>>>>>>> Thank you again
>>>>>>>>>>>>> John
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
>>>>>>>>>>>>> <#m_-569897249714730703_-4854266097526528327_m_-7493428196509585301_-5756186123862802549_m_8609758458903822796_-65592669212000630_m_-8536860175219300229_-1124727061549475576_m_-5433398701804568750_8512039743991471051_m_-7903770007788375743_-8302944468710889422_m_-6526612104687365019_2029646711665639488_DDB4FAA8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Thu, Mar 17, 2016 at 6:58 PM, Ismael Gomez <
>>>>>>>>>>>>> ismael.gomez at softwareradiosystems.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi John,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> What frequencies are you using? Do you know what BW these
>>>>>>>>>>>>>> networks operate at?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Thu, 17 Mar 2016 at 15:09 John Sfox <
>>>>>>>>>>>>>> sfoxsfoxjohn at gmail.com> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hi!
>>>>>>>>>>>>>>> I'm a student and I would like to integrate an lte receiver
>>>>>>>>>>>>>>> in my project related to verify the lte coverage for differnt height
>>>>>>>>>>>>>>> values.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I'm using a drone developed by the university with the Ettus
>>>>>>>>>>>>>>> B210.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I used your examples (cell measurements in particular where
>>>>>>>>>>>>>>> you can pick up various parameters related to lte coverage
>>>>>>>>>>>>>>> like  RSSI, RSRP, RSPQ, SNR) but these do not work for all
>>>>>>>>>>>>>>> frequencies present in this area
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Could you help me understand how to properly use your
>>>>>>>>>>>>>>> library.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Thank you
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> John
>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>> srslte-users mailing list
>>>>>>>>>>>>>>> srslte-users at lists.softwareradiosystems.com
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>> srslte-users mailing list
>>>>>>>>>>>>> srslte-users at lists.softwareradiosystems.com
>>>>>>>>>>>>>
>>>>>>>>>>>>> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>
>>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20160322/44698a66/attachment.htm>

More information about the srsran-users mailing list