[srslte-users] SrsUE USRP porting time out problem

[Nick Ho]

Hello everyone,
     I used B210 to port the srsUE latest version to ower own eNB, but it
shows the following problem, my CPU is 4 cores. Sometimes , it dosen't
decode MIB even.

nick at nick-Aspire-V5-471PG:~/srsUE/build/ue/src$ sudo taskset -c 2-3 ./ue
ue.conf
linux; GNU C++ version 4.8.4; Boost_105400; UHD_3.11.0.git-28-gc66cb1ba

---  Software Radio Systems LTE UE  ---

Reading configuration file ue.conf...
Using srsLTE version 001.003.000
Opening USRP with args: type=b200,recv_frame_size=9232,send_frame_size=9232
-- Detected Device: B210
-- Operating over USB 3.
-- Initialize CODEC control...
-- Initialize Radio control...
-- Performing register loopback test... pass
-- Performing register loopback test... pass
-- Performing CODEC loopback test... pass
-- Performing CODEC loopback test... pass
-- Setting master clock rate selection to 'automatic'.
-- Asking for clock rate 16.000000 MHz...
-- Actually got clock rate 16.000000 MHz.
-- Performing timer loopback test... pass
-- Performing timer loopback test... pass
-- Asking for clock rate 32.000000 MHz...
-- Actually got clock rate 32.000000 MHz.
-- Performing timer loopback test... pass
-- Performing timer loopback test... pass
Setting frequency: DL=2680.0 Mhz, UL=2560.0 MHz
Searching for cell...
Found CELL ID: 1 CP: Normal  , CFO: 1.2 KHz.
Trying to decode MIB...
 - Cell ID:         1
 - Nof ports:       2
 - CP:              Normal
 - PRB:             15
 - PHICH Length:    Normal
 - PHICH Resources: 1
 - SFN:             0
MIB received BW=3 MHz
Initializating cell configuration...
Setting Sampling frequency 3.84 MHz
Timeout while synchronizing SFN
Timeout while synchronizing SFN

Best regards,
Nick.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20161115/007a98cd/attachment.htm>