[srslte-users] Setting up MIMO config using USRP B210

[Xavier Arteaga]

Hi Pratik,
First of all, thank you for your email. It is pretty simple but it is not
documented.

You could try to set the following parameters in the ue.conf:
nof_rx_ant = 2

And in the enb.conf:
tm = 3
nof_ports = 2

Also, I recommend you to start with 10MHz bandwidth (50 PRB). That should
give you 75 Mbps (if your antennas are orthogonal enough).

Let me know if you encounter any problem with this.

Regards,
Xavier

On 19 April 2018 at 12:28, Pratik Walvekar <pratikvwalvekar at gmail.com>
wrote:

> Hello,
>        I am trying to set up 2x2 MIMO configuration for some
> experimentation using USRP B210. Unfortunately , I could not find much
> documentation regarding the same. It would be of great help if someone
> could share the link to the documentation or steps to achieve it , as a
> starting point. I am new to this, so forgive me if its obvious.
>
>
> Regards,
> Pratik
>
> _______________________________________________
> srslte-users mailing list
> srslte-users at lists.softwareradiosystems.com
> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20180419/a5163ef8/attachment.htm>