[srslte-users] No Data

[Justin Tallon]

Jason,

Are you trying to use mbms? if so, this is not possible with a COTS UE as
special firmware is needed within the phone which does not come as
standard. You will need to use srsue if you are interested in mbms.

If you are just trying for a unicast link, you dont need to run the mbms-gw.

If you want data to the phone over a regular unicast link you need to run
the srsepc_if_masq.sh script at the enodeb as follows:

./srsepc_if_masq.sh <eth_iface>



Regards,
Justin

____
Justin Tallon Ph.D.

Software Radio Systems (SRS)
http://www.softwareradiosystems.com

+353-86-067-0753 | justin.tallon at softwareradiosystems.com


On Thu, Dec 13, 2018 at 9:04 PM Jason N <mbzoutlaw at gmail.com> wrote:

> Hi Justin,
>
> I am using a nexus 5x and an iPhone 6s.
>
> Thanks
>
> On Thu, Dec 13, 2018 at 2:12 PM Justin Tallon <
> justin.tallon at softwareradiosystems.com> wrote:
>
>> Hey Jason,
>>
>> Are you using a COTS UE?
>>
>>
>> On Thu, 13 Dec 2018, 19:46 Jason N, <mbzoutlaw at gmail.com> wrote:
>>
>>> All,
>>>
>>> I'm running srsLTE .09 using a b205mini Ettus board.  The UE will attach
>>> to the enodeB but I am not getting data.  I am running the epc and mbms .
>>> When the UE attaches I get an error message. " Unhandled feature in RRC
>>> function: liblte_rrc_unpack_rrc_connection_setup_complete_msg".  Attached
>>> is the log and pcap files.
>>>
>>> Thanks
>>> Jason
>>> _______________________________________________
>>> srslte-users mailing list
>>> srslte-users at lists.softwareradiosystems.com
>>> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
>>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20181213/ec45ccbb/attachment.htm>