[srslte-users] No Data

[Jason N]

Justin,

I was trying to use the mbms and without.  I was missing the masq script.
Once I ran that everything works great!  Is there documentation of this
sort of thing somewhere?  I feel pretty silly asking about the simple stuff.

Thanks again!

On Thu, Dec 13, 2018 at 4:24 PM Justin Tallon <
justin.tallon at softwareradiosystems.com> wrote:

> Jason,
>
> Are you trying to use mbms? if so, this is not possible with a COTS UE as
> special firmware is needed within the phone which does not come as
> standard. You will need to use srsue if you are interested in mbms.
>
> If you are just trying for a unicast link, you dont need to run the
> mbms-gw.
>
> If you want data to the phone over a regular unicast link you need to run
> the srsepc_if_masq.sh script at the enodeb as follows:
>
> ./srsepc_if_masq.sh <eth_iface>
>
>
>
> Regards,
> Justin
>
> ____
> Justin Tallon Ph.D.
>
> Software Radio Systems (SRS)
> http://www.softwareradiosystems.com
>
> +353-86-067-0753 | justin.tallon at softwareradiosystems.com
>
>
> On Thu, Dec 13, 2018 at 9:04 PM Jason N <mbzoutlaw at gmail.com> wrote:
>
>> Hi Justin,
>>
>> I am using a nexus 5x and an iPhone 6s.
>>
>> Thanks
>>
>> On Thu, Dec 13, 2018 at 2:12 PM Justin Tallon <
>> justin.tallon at softwareradiosystems.com> wrote:
>>
>>> Hey Jason,
>>>
>>> Are you using a COTS UE?
>>>
>>>
>>> On Thu, 13 Dec 2018, 19:46 Jason N, <mbzoutlaw at gmail.com> wrote:
>>>
>>>> All,
>>>>
>>>> I'm running srsLTE .09 using a b205mini Ettus board.  The UE will
>>>> attach to the enodeB but I am not getting data.  I am running the epc and
>>>> mbms .  When the UE attaches I get an error message. " Unhandled feature in
>>>> RRC function: liblte_rrc_unpack_rrc_connection_setup_complete_msg".
>>>> Attached is the log and pcap files.
>>>>
>>>> Thanks
>>>> Jason
>>>> _______________________________________________
>>>> srslte-users mailing list
>>>> srslte-users at lists.softwareradiosystems.com
>>>> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
>>>>
>>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20181213/9c6609ca/attachment.htm>