[srslte-users] UE not identifying ENB

[Kewin Rausch]

Can you try using n_prb=25 or 50 and see what happens?
Srsenb should be tuned with particular configuration for 75 and 100
resource blocks; I've never been able to use it with wide bw and default
configuration setup.

Cheers,
Kewin R.

On Tue, Dec 18, 2018 at 4:52 PM devifr <devifr at gmail.com> wrote:

>
> Here's the updated log, pcap and conf files.
>
> Thanks,
> Derek
>  enb (1).log
> <https://drive.google.com/file/d/1heErabbCYp0dHbq0N1dfZT7rwLEu82M2/view?usp=drive_web>
>  enb (1).pcap
> <https://drive.google.com/file/d/1GXSCqd3xN_lpLltWAFXicW4PsK7Ihn42/view?usp=drive_web>
>  epc (1).log
> <https://drive.google.com/file/d/1zdgrCn266e9RF7xfjgNhh-Ncj9Iv7jdx/view?usp=drive_web>
>  epc (1).pcap
> <https://drive.google.com/file/d/18E0IfucG5-rSPzzn94lqdJsycIdD0gTM/view?usp=drive_web>
>
>
> On Tue, Dec 18, 2018 at 2:36 AM Kewin Rausch <krausch at fbk.eu> wrote:
>
>> Hey there,
>> just a couple of comments.
>>
>>    - Log is basically not existing (you are running enb in error level
>>    Warning, while it should be set to Info or Debug).
>>    For example, the enb.log file has only two lines!
>>
>>    - No configuration of the enb/epc is present, so we can't say how you
>>    configured it either.
>>
>> When you ask for help you should commit to present the more information
>> possible, not the less. :-)
>>
>> Cheers,
>> Kewin R.
>>
>> On Mon, Dec 17, 2018 at 4:19 PM devifr <devifr at gmail.com> wrote:
>>
>>> I'm having issues getting with the UE attaching to the ENB.  With
>>> regards to the ENB, I've used both the USRP Mini B200 as well as the
>>> BladeRF.  I had another computer running SDRSharp with an Airspy SDR and I
>>> can confirm that I can see power coming off the ENB.  (NOTE: the BladeRF
>>> had a much more consistent, solid spike in the RF waterfall versus the
>>> USRP.  The USRP ebbed and flowed with the "U" trace.)
>>>
>>> With regards to the UE's I have a Nexus 5X as well as a Nemo Handy to
>>> measure drive test data.  Both devices have a programmable SIM with the
>>> default parameters listed in user_db.csv.
>>>
>>> After launching the EPC/ENB, I've ensured that I've ran the
>>> ./srsepc_if_masq.sh <wireless interface>.  Still...no joy.
>>>
>>> I've attached the logs and pcaps.  Any suggestions are greatly
>>> appreciated.  Thanks.
>>> _______________________________________________
>>> srslte-users mailing list
>>> srslte-users at lists.softwareradiosystems.com
>>> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
>>>
>>
>> --
>> Le informazioni contenute nella presente comunicazione sono di natura privata
>> e come tali sono da considerarsi riservate ed indirizzate esclusivamente
>> ai destinatari indicati e per le finalità strettamente legate al
>> relativo contenuto. Se avete ricevuto questo messaggio per errore, vi
>> preghiamo di eliminarlo e di inviare una comunicazione all’indirizzo
>> e-mail del mittente.
>> --
>> The information transmitted is intended only for the person or entity to
>> which it is addressed and may contain confidential and/or privileged
>> material. If you received this in error, please contact the sender and
>> delete the material.
>>
>

-- 
--
Le informazioni contenute nella presente comunicazione sono di natura 
privata e come tali sono da considerarsi riservate ed indirizzate 
esclusivamente ai destinatari indicati e per le finalità strettamente 
legate al relativo contenuto. Se avete ricevuto questo messaggio per 
errore, vi preghiamo di eliminarlo e di inviare una comunicazione 
all’indirizzo e-mail del mittente.

--
The information transmitted is 
intended only for the person or entity to which it is addressed and may 
contain confidential and/or privileged material. If you received this in 
error, please contact the sender and delete the material.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20181218/912f43a6/attachment.htm>