[srslte-users] Attaching a UE to srsENB

[Ismael Gomez]

Make sure your connectors and antennas are correct. Make sure the antennas
are cross-polarized. Make sure you are transmitting on an empty frequency
band and that band is supported by your phones.

On Tue, 20 Feb 2018 at 22:00 Moncef Nabil Boukhatem <
moncef.boukhatem at telecom-paristech.fr> wrote:

> Hello,
>
> I would like to attach a UE to my srsENB and I would like to know what are
> the parameters to change in order to do it.
>
> My srsENB is working good with srsEPC. I've successfuly attached srsUE to
> srsENB (Both USRP B210) but couldn't manage to make my network visible to
> my UE (I've used many UEs : Xiaomi Redmi 4, Samsung Note 5, Iphone 5S and
> SE; none of them could see the network even if they are all compatible with
> the band I'm using).
>
> I think that the problem might be with the gain, the channel used is
> visible by using a spectrum analyzer, but the power is very weak (less than
> 1dB, I am using a USRP B210) even by putting the tx gain to 90 or 100 or
> more, but I am not really sure about it.
>
> Thank you for your help,
>
> Best regards,
>
> BOUKHATEM Moncef Nabil
> _______________________________________________
> srslte-users mailing list
> srslte-users at lists.softwareradiosystems.com
> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20180222/d4de7b03/attachment.htm>