[srslte-users] Clock Rate Definitions and Overclocking

[BALTACI, Ayguen]

Hi mates,

I am new to the forum and srsLTE. I am running srsepc + srsenb + srsue. I am trying to understand why USRP board is set to two different clock rates during initialization (see the attached image). Is 30.72 MHz clock rate overwritten by 23.04 MHz in the end?

I want to overclock the system to measure the performance changes. Could you direct me how to do so? I modified the source code so that I could increase the clock rate from "23.04" MHz to "46.08" MHz (2nd one in the image) both at eNB and at UE, but then UE could not find the eNB.

I look forward to your suggestions,

Best Regards
Aygun

The information in this e-mail is confidential. The contents may not be disclosed or used by anyone other than the addressee. Access to this e-mail by anyone else is unauthorised.
If you are not the intended recipient, please notify Airbus immediately and delete this e-mail.
Airbus cannot accept any responsibility for the accuracy or completeness of this e-mail as it has been sent over public networks. If you have any concerns over the content of this message or its Accuracy or Integrity, please contact Airbus immediately.
All outgoing e-mails from Airbus are checked using regularly updated virus scanning software but you should take whatever measures you deem to be appropriate to ensure that this message and any attachments are virus free.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20180625/3e4f471f/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: clockRates_srsLTE.png
Type: image/png
Size: 92765 bytes
Desc: clockRates_srsLTE.png
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20180625/3e4f471f/attachment.png>