[srslte-users] New install, how to change LTE bandwidth?

[Andre Puschmann]

Hey,

changing the eNB config is enough. The UE picks up the cell config
automatically.

That being said, there seems to be a problem with the current version
with 6 PRBs that will be fixed soon. Meanwhile, can you try if 25 or 50
PRB work for you?

Thanks
Andre



On 21/03/18 14:46, Patrick Cutno wrote:
> I have been using srsLTE 1.0 (before srsENB) was introduced and just
> made the switch to the current version. I looked through posts from the
> last few months but I couldn’t find clear instructions on what
> parameters to change in the configs to use different LTE bandwidths. I
> am trying to use 1.4 MHz.
> 
>  
> 
> In the eNb config I changed the “n_prb” to 6 but what do I do on the UE
> side? As is, the UE picks up the prb=6 and displays it in the trace but
> I immediately get a radio link failure. FYI, the default configs
> “out-of-the-box” work fine. So I can eliminate hardware as an issue.
> 
>  
> 
> What am I missing?
> 
> 
> 
> _______________________________________________
> srslte-users mailing list
> srslte-users at lists.softwareradiosystems.com
> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
>