[srslte-users] New install, how to change LTE bandwidth?

[Patrick Cutno]

Looks like prb=15 works

From: Patrick Cutno
Sent: Wednesday, March 21, 2018 9:47 AM
To: 'srslte-users at lists.softwareradiosystems.com' <srslte-users at lists.softwareradiosystems.com>
Subject: New install, how to change LTE bandwidth?

I have been using srsLTE 1.0 (before srsENB) was introduced and just made the switch to the current version. I looked through posts from the last few months but I couldn't find clear instructions on what parameters to change in the configs to use different LTE bandwidths. I am trying to use 1.4 MHz.

In the eNb config I changed the "n_prb" to 6 but what do I do on the UE side? As is, the UE picks up the prb=6 and displays it in the trace but I immediately get a radio link failure. FYI, the default configs "out-of-the-box" work fine. So I can eliminate hardware as an issue.

What am I missing?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20180321/58c0e953/attachment.htm>