[srslte-users] Need help build error when make on srsLTE with LimeSDR
Sandi Suhendro
djks74 at gmail.com
Mon Nov 5 13:07:32 UTC 2018
I did try remove the soapyUHD and delete the libuhd and libuhdsupport from
usr/local/lib, but when re install the srs-LTE, it gives me error it need
UHD.
do you know it may cause I miss it how to build srsLTE direct to soapySDR?
anyway, it has output signal on earfcn 1600, but dont see the network with
UHD.
maybe better using soapySDR instead UHD, but the installation asking UHD.
please advise.
regards,
Sandi
On Mon, Nov 5, 2018 at 3:11 AM Andre Puschmann <
andre.puschmann at softwareradiosystems.com> wrote:
> Hey,
>
> seems like you are trying to run the Lime through UHD, i.e. using the
> uhd-soapy wrapper. I am not sure if it is working well but maybe it
> does. Does it output a signal?
>
> We do have a Soapy driver which also works with the Lime so maybe try
> using that instead. Probably the easiest is to uninstall the uhd-soapy
> wrapper. The problem here is that the srsLTE's RF driver library stops
> looking for other devices as soon as a supported device is found and the
> UHD driver is the first to query.
>
>
> Hope that helps.
>
> Cheers
> Andre
>
>
>
>
> On 4/11/18 15:07, Sandi Suhendro wrote:
> > Dear Andre,
> > Do you know what I miss?
> > I have this following error :
> > <<<<<<<<<
> > sudo srsenb
> > linux; GNU C++ version 5.4.0 20160609; Boost_105800;
> > UHD_003.010.002.HEAD-0-gbd6e21dc
> >
> >
> > Built in Release mode using commit 1c015aab on branch master.
> >
> > --- Software Radio Systems LTE eNodeB ---
> >
> > Reading configuration file /home/duo/.srs/enb.conf...
> > Opening USRP with args:
> > -- Make connection: 'LimeSDR-USB [USB 3.0] 9061C02C73125'
> > -- Device name: LimeSDR-USB
> > -- Reference: 30.72 MHz
> > -- Init LMS7002M(0)
> > -- Ver=7, Rev=1, Mask=1
> > -- LMS7002M calibration values caching Enable
> > Setting frequency: DL=1845.0 Mhz, UL=1750.0 MHz
> > Setting Sampling frequency 11.52 MHz
> >
> > Warning TX/RX time offset has not been calibrated for device
> > uhd_unknown. Set a value manually
> >
> >
> > ==== eNodeB started ===
> > Type <t> to view trace
> > Error timed out while receiving samples from UHD.
> > Error timed out while receiving samples from UHD.
> > Error timed out while receiving samples from UHD.
> >>>>>>>>>>>>
> >
> > And in the log of nextepc is :
> > [11/04 20:48:59.179] eNB-S1 accepted[127.0.1.1]:55722 in s1_path module
> > [11/04 20:48:59.180] eNB-S1 accepted[127.0.1.1] in master_sm module
> >
> >
> > Please advise! Thanks in advance. :-)
> >
> > regards,
> > Sandi / DUO
> >
> >
> > On Fri, Nov 2, 2018 at 3:51 PM Andre Puschmann
> > <andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>> wrote:
> >
> > Sandi,
> >
> > glad to hear you got it working. Let us know how it goes.
> >
> > Cheers
> > Andre
> >
> > On 2/11/18 8:54, Sandi Suhendro wrote:
> > > Dear Andre,
> > > sorry for this simple matter. try to remove all and re install and
> it
> > > works now. Thanks.
> > >
> > > regards,
> > > Sandi / DUO
> > >
> > > On Thu, Nov 1, 2018 at 10:33 PM Sandi Suhendro <djks74 at gmail.com
> > <mailto:djks74 at gmail.com>
> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>> wrote:
> > >
> > > Dear Andre,
> > > Thanks for response.
> > >
> > > Im using ubuntu 16.04 and build soapySDR from git.
> > > as I remember Im using ppa at first but I also install again
> > from git.
> > > what should I do? remove all soapy from apt and make uninstall
> > from
> > > git too then re install?
> > >
> > > please advise.
> > >
> > > regards,
> > > Sandi / DUO
> > >
> > > On Thu, Nov 1, 2018 at 9:33 PM Andre Puschmann
> > > <andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>
> > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>>> wrote:
> > >
> > > Likely to be a mismatch of headers. What system are you on
> and
> > > where do
> > > you get the soapy dev package from? git, ppa?
> > >
> > >
> > > On 31/10/18 12:43, Sandi Suhendro wrote:
> > > > Dear list,
> > > > hope someone can give me advise what is wrong?
> > > > Im runing fine with osmocom or openbts-umts. (2g/3g)
> > > > but....
> > > > Im facing SoapySDR range error when build srsLTE :
> > > >
> > > > [ 40%] Linking C executable pdsch_test
> > > > [ 40%] Built target pdsch_test
> > > > [ 40%] Building C object
> > > >
> lib/src/phy/rf/CMakeFiles/srslte_rf_utils.dir/rf_utils.c.o
> > > > [ 40%] Linking C static library libsrslte_rf_utils.a
> > > > [ 40%] Built target srslte_rf_utils
> > > > [ 41%] Building C object
> > > lib/src/phy/rf/CMakeFiles/srslte_rf.dir/rf_imp.c.o
> > > > [ 41%] Building C object
> > > > lib/src/phy/rf/CMakeFiles/srslte_rf.dir/rf_uhd_imp.c.o
> > > > [ 41%] Building CXX object
> > > > lib/src/phy/rf/CMakeFiles/srslte_rf.dir/uhd_c_api.cpp.o
> > > > [ 41%] Building C object
> > > > lib/src/phy/rf/CMakeFiles/srslte_rf.dir/rf_soapy_imp.c.o
> > > > In file included from
> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
> > > > /usr/include/SoapySDR/Types.h:25:3: error: conflicting
> > types for
> > > > ‘SoapySDRRange’
> > > > } SoapySDRRange;
> > > > ^
> > > > In file included from
> > /usr/local/include/SoapySDR/Device.h:18:0,
> > > > from
> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
> > > > /usr/local/include/SoapySDR/Types.h:25:3: note: previous
> > > declaration of
> > > > ‘SoapySDRRange’ was here
> > > > } SoapySDRRange;
> > > > ^
> > > > In file included from
> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
> > > > /usr/include/SoapySDR/Types.h:33:3: error: conflicting
> > types for
> > > > ‘SoapySDRKwargs’
> > > > } SoapySDRKwargs;
> > > > ^
> > > > In file included from
> > /usr/local/include/SoapySDR/Device.h:18:0,
> > > > from
> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
> > > > /usr/local/include/SoapySDR/Types.h:33:3: note: previous
> > > declaration of
> > > > ‘SoapySDRKwargs’ was here
> > > > } SoapySDRKwargs;
> > > > ^
> > > > In file included from
> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
> > > > /usr/include/SoapySDR/Types.h:39:30: error: conflicting
> > types for
> > > > ‘SoapySDRKwargs_fromString’
> > > > SOAPY_SDR_API SoapySDRKwargs
> > SoapySDRKwargs_fromString(const
> > > char *markup);
> > > > ^
> > > > In file included from
> > /usr/local/include/SoapySDR/Device.h:18:0,
> > > > from
> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
> > > > /usr/local/include/SoapySDR/Types.h:39:30: note: previous
> > > declaration of
> > > > ‘SoapySDRKwargs_fromString’ was here
> > > > SOAPY_SDR_API SoapySDRKwargs
> > SoapySDRKwargs_fromString(const
> > > char *markup);
> > > > ^
> > > > In file included from
> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
> > > > /usr/include/SoapySDR/Types.h:45:21: error: conflicting
> > types for
> > > > ‘SoapySDRKwargs_toString’
> > > > SOAPY_SDR_API char *SoapySDRKwargs_toString(const
> > > SoapySDRKwargs *args);
> > > > ^
> > > > In file included from
> > /usr/local/include/SoapySDR/Device.h:18:0,
> > > > from
> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
> > > > /usr/local/include/SoapySDR/Types.h:45:21: note: previous
> > > declaration of
> > > > ‘SoapySDRKwargs_toString’ was here
> > > > SOAPY_SDR_API char *SoapySDRKwargs_toString(const
> > > SoapySDRKwargs *args);
> > > > ^
> > > > In file included from
> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
> > > > /usr/include/SoapySDR/Types.h:50:5: error: redeclaration
> of
> > > enumerator
> > > > ‘SOAPY_SDR_ARG_INFO_BOOL’
> > > > SOAPY_SDR_ARG_INFO_BOOL,
> > > > ^
> > > > In file included from
> > /usr/local/include/SoapySDR/Device.h:18:0,
> > > > from
> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
> > > > /usr/local/include/SoapySDR/Types.h:50:5: note: previous
> > > definition of
> > > > ‘SOAPY_SDR_ARG_INFO_BOOL’ was here
> > > > SOAPY_SDR_ARG_INFO_BOOL,
> > > > ^
> > > > In file included from
> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
> > > > /usr/include/SoapySDR/Types.h:51:5: error: redeclaration
> of
> > > enumerator
> > > > ‘SOAPY_SDR_ARG_INFO_INT’
> > > > SOAPY_SDR_ARG_INFO_INT,
> > > > ^
> > > > In file included from
> > /usr/local/include/SoapySDR/Device.h:18:0,
> > > > from
> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
> > > > /usr/local/include/SoapySDR/Types.h:51:5: note: previous
> > > definition of
> > > > ‘SOAPY_SDR_ARG_INFO_INT’ was here
> > > > SOAPY_SDR_ARG_INFO_INT,
> > > > ^
> > > > In file included from
> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
> > > > /usr/include/SoapySDR/Types.h:52:5: error: redeclaration
> of
> > > enumerator
> > > > ‘SOAPY_SDR_ARG_INFO_FLOAT’
> > > > SOAPY_SDR_ARG_INFO_FLOAT,
> > > > ^
> > > > In file included from
> > /usr/local/include/SoapySDR/Device.h:18:0,
> > > > from
> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
> > > > /usr/local/include/SoapySDR/Types.h:52:5: note: previous
> > > definition of
> > > > ‘SOAPY_SDR_ARG_INFO_FLOAT’ was here
> > > > SOAPY_SDR_ARG_INFO_FLOAT,
> > > > ^
> > > > In file included from
> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
> > > > /usr/include/SoapySDR/Types.h:53:5: error: redeclaration
> of
> > > enumerator
> > > > ‘SOAPY_SDR_ARG_INFO_STRING’
> > > > SOAPY_SDR_ARG_INFO_STRING
> > > > ^
> > > > In file included from
> > /usr/local/include/SoapySDR/Device.h:18:0,
> > > > from
> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
> > > > /usr/local/include/SoapySDR/Types.h:53:5: note: previous
> > > definition of
> > > > ‘SOAPY_SDR_ARG_INFO_STRING’ was here
> > > > SOAPY_SDR_ARG_INFO_STRING
> > > > ^
> > > > In file included from
> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
> > > > /usr/include/SoapySDR/Types.h:54:3: error: conflicting
> > types for
> > > > ‘SoapySDRArgInfoType’
> > > > } SoapySDRArgInfoType;
> > > > ^
> > > > In file included from
> > /usr/local/include/SoapySDR/Device.h:18:0,
> > > > from
> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
> > > > /usr/local/include/SoapySDR/Types.h:54:3: note: previous
> > > declaration of
> > > > ‘SoapySDRArgInfoType’ was here
> > > > } SoapySDRArgInfoType;
> > > > ^
> > > > In file included from
> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
> > > > /usr/include/SoapySDR/Types.h:103:3: error: conflicting
> > types for
> > > > ‘SoapySDRArgInfo’
> > > > } SoapySDRArgInfo;
> > > > ^
> > > > In file included from
> > /usr/local/include/SoapySDR/Device.h:18:0,
> > > > from
> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
> > > > /usr/local/include/SoapySDR/Types.h:103:3: note: previous
> > > declaration of
> > > > ‘SoapySDRArgInfo’ was here
> > > > } SoapySDRArgInfo;
> > > > ^
> > > > In file included from
> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
> > > > /usr/include/SoapySDR/Types.h:114:20: error: conflicting
> > types for
> > > > ‘SoapySDRKwargs_set’
> > > > SOAPY_SDR_API void SoapySDRKwargs_set(SoapySDRKwargs
> *args,
> > > const char
> > > > *key, co
> > > > ^
> > > > In file included from
> > /usr/local/include/SoapySDR/Device.h:18:0,
> > > > from
> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
> > > > /usr/local/include/SoapySDR/Types.h:120:19: note:
> previous
> > > declaration
> > > > of ‘SoapySDRKwargs_set’ was here
> > > > SOAPY_SDR_API int SoapySDRKwargs_set(SoapySDRKwargs
> *args,
> > > const char
> > > > *key, con
> > > > ^
> > > > In file included from
> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
> > > > /usr/include/SoapySDR/Types.h:120:27: error: conflicting
> > types for
> > > > ‘SoapySDRKwargs_get’
> > > > SOAPY_SDR_API const char
> *SoapySDRKwargs_get(SoapySDRKwargs
> > > *args,
> > > > const char *
> > > > ^
> > > > In file included from
> > /usr/local/include/SoapySDR/Device.h:18:0,
> > > > from
> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
> > > > /usr/local/include/SoapySDR/Types.h:126:27: note:
> previous
> > > declaration
> > > > of ‘SoapySDRKwargs_get’ was here
> > > > SOAPY_SDR_API const char *SoapySDRKwargs_get(const
> > SoapySDRKwargs
> > > > *args, const
> > > > ^
> > > > In file included from
> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
> > > > /usr/include/SoapySDR/Types.h:126:20: error: conflicting
> > types for
> > > > ‘SoapySDRKwargs_clear’
> > > > SOAPY_SDR_API void SoapySDRKwargs_clear(SoapySDRKwargs
> > *args);
> > > > ^
> > > > In file included from
> > /usr/local/include/SoapySDR/Device.h:18:0,
> > > > from
> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
> > > > /usr/local/include/SoapySDR/Types.h:132:20: note:
> previous
> > > declaration
> > > > of ‘SoapySDRKwargs_clear’ was here
> > > > SOAPY_SDR_API void SoapySDRKwargs_clear(SoapySDRKwargs
> > *args);
> > > > ^
> > > > In file included from
> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
> > > > /usr/include/SoapySDR/Types.h:132:20: error: conflicting
> > types for
> > > > ‘SoapySDRKwargsList_clear’
> > > > SOAPY_SDR_API void
> SoapySDRKwargsList_clear(SoapySDRKwargs
> > > *args, const
> > > > size_t
> > > > ^
> > > > In file included from
> > /usr/local/include/SoapySDR/Device.h:18:0,
> > > > from
> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
> > > > /usr/local/include/SoapySDR/Types.h:138:20: note:
> previous
> > > declaration
> > > > of ‘SoapySDRKwargsList_clear’ was here
> > > > SOAPY_SDR_API void
> SoapySDRKwargsList_clear(SoapySDRKwargs
> > > *args, const
> > > > size_t
> > > > ^
> > > > In file included from
> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
> > > > /usr/include/SoapySDR/Types.h:138:20: error: conflicting
> > types for
> > > > ‘SoapySDRArgInfo_clear’
> > > > SOAPY_SDR_API void
> > SoapySDRArgInfo_clear(SoapySDRArgInfo *info);
> > > > ^
> > > > In file included from
> > /usr/local/include/SoapySDR/Device.h:18:0,
> > > > from
> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
> > > > /usr/local/include/SoapySDR/Types.h:144:20: note:
> previous
> > > declaration
> > > > of ‘SoapySDRArgInfo_clear’ was here
> > > > SOAPY_SDR_API void
> > SoapySDRArgInfo_clear(SoapySDRArgInfo *info);
> > > > ^
> > > > In file included from
> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
> > > > /usr/include/SoapySDR/Types.h:144:20: error: conflicting
> > types for
> > > > ‘SoapySDRArgInfoList_clear’
> > > > SOAPY_SDR_API void
> > SoapySDRArgInfoList_clear(SoapySDRArgInfo
> > > *info,
> > > > const size_
> > > > ^
> > > > In file included from
> > /usr/local/include/SoapySDR/Device.h:18:0,
> > > > from
> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
> > > > /usr/local/include/SoapySDR/Types.h:150:20: note:
> previous
> > > declaration
> > > > of ‘SoapySDRArgInfoList_clear’ was here
> > > > SOAPY_SDR_API void
> > SoapySDRArgInfoList_clear(SoapySDRArgInfo
> > > *info,
> > > > const size_
> > > > ^
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c: In
> function
> > > > ‘rf_soapy_open_multi’:
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:296:38:
> > error:
> > > > initialization from incompatible pointer type
> > > > [-Werror=incompatible-pointer-types]
> > > > const SoapySDRKwargs *soapy_args =
> > > SoapySDRDevice_enumerate(NULL,
> > > > &length);
> > > > ^
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:316:45:
> > error:
> > > passing
> > > > argument 1 of ‘SoapySDRDevice_make’ from incompatible
> > pointer type
> > > > [-Werror=incompatible-pointer-types]
> > > > SoapySDRDevice *sdr =
> > SoapySDRDevice_make(&(soapy_args[0]));
> > > > ^
> > > > In file included from
> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:0:
> > > > /usr/local/include/SoapySDR/Device.h:78:31: note:
> > expected ‘const
> > > > SoapySDRKwargs * {aka const struct <anonymous> *}’ but
> > > argument is of
> > > > type ‘const SoapySDRKwargs * {aka const struct
> > <anonymous> *}’
> > > > SOAPY_SDR_API SoapySDRDevice *SoapySDRDevice_make(const
> > > SoapySDRKwargs
> > > > *args);
> > > > ^
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:380:28:
> > error:
> > > invalid
> > > > initializer
> > > > SoapySDRRange tx_range =
> > > SoapySDRDevice_getGainRange(handler->device,
> > > > SOAPY_S
> > > > ^
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:381:28:
> > error:
> > > invalid
> > > > initializer
> > > > SoapySDRRange rx_range =
> > > SoapySDRDevice_getGainRange(handler->device,
> > > > SOAPY_S
> > > > ^
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c: In
> function
> > > > ‘rf_soapy_set_rx_srate’:
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:581:29:
> > error:
> > > > initialization from incompatible pointer type
> > > > [-Werror=incompatible-pointer-types]
> > > > SoapySDRRange *bw_range =
> > > > SoapySDRDevice_getBandwidthRange(handler->device, S
> > > > ^
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c: In
> function
> > > > ‘rf_soapy_set_tx_srate’:
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:617:29:
> > error:
> > > > initialization from incompatible pointer type
> > > > [-Werror=incompatible-pointer-types]
> > > > SoapySDRRange *bw_range =
> > > > SoapySDRDevice_getBandwidthRange(handler->device, S
> > > > ^
> > > > cc1: some warnings being treated as errors
> > > > lib/src/phy/rf/CMakeFiles/srslte_rf.dir/build.make:134:
> > recipe for
> > > > target
> > > 'lib/src/phy/rf/CMakeFiles/srslte_rf.dir/rf_soapy_imp.c.o'
> > failed
> > > > make[2]: ***
> > > [lib/src/phy/rf/CMakeFiles/srslte_rf.dir/rf_soapy_imp.c.o]
> > > > Error 1
> > > > CMakeFiles/Makefile2:2905: recipe for target
> > > > 'lib/src/phy/rf/CMakeFiles/srslte_rf.dir/all' failed
> > > > make[1]: ***
> > [lib/src/phy/rf/CMakeFiles/srslte_rf.dir/all] Error 2
> > > > Makefile:160: recipe for target 'all' failed
> > > > make: *** [all] Error 2
> > > >
> > > >
> > > > Please advise! Thanks
> > > > --
> > > > Best Regards,
> > > > DUO
> > > >
> > > >
> > > > _______________________________________________
> > > > srslte-users mailing list
> > > > srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>
> > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>>
> > > >
> > http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
> > > >
> > >
> > >
> > >
> > > --
> > > Best Regards,
> > > Sandi
> > >
> > >
> > >
> > > --
> > > Best Regards,
> > > Sandi
> > >
> >
> >
> > --
> > Andre Puschmann
> >
> > Software Radio Systems (SRS)
> > http://www.softwareradiosystems.com
> >
> > PGP/GnuPG key: 6C42AB31
> > fingerprint: 137A AE49 785B A445 257C 8AD7 D877 A498 6C42 AB31
> >
> >
> >
> > --
> > Best Regards,
> > Sandi
> >
>
>
> --
> Andre Puschmann
>
> Software Radio Systems (SRS)
> http://www.softwareradiosystems.com
>
> PGP/GnuPG key: 6C42AB31
> fingerprint: 137A AE49 785B A445 257C 8AD7 D877 A498 6C42 AB31
>
--
Best Regards,
Sandi
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20181105/c8e4753d/attachment.htm>
More information about the srsran-users
mailing list