[srslte-users] Need help build error when make on srsLTE with LimeSDR
Sandi Suhendro
djks74 at gmail.com
Tue Nov 6 13:43:23 UTC 2018
Dear Ignas,
Thanks to let me know to update. Now it works and i saw my 4g network now.
:)
Just strange not all phone see the network. Will try to attach now. :)
Thanks and warm regards,
Sandi
On Tue, Nov 6, 2018, 19:56 Ignas Jarusevicius <i.jarusevicius at limemicro.com
wrote:
> Hi Sandri,
>
> I have noticed that you are using old libLimeSuite version as recent
> versions show 'module=FX3' for LimeSDR-USB. So try updating LimeSuite.
> Also, I was I able to get srsenb working with LimeSDR boards few months
> ago. I have attached one of my enb.conf that used to work (not sure if it
> still works with current srsLTE version).
>
> -Ignas
> On 2018-11-05 16:02, Sandi Suhendro wrote:
>
> Hi Andre,
> ok finally working to Lime direct via Soapy, just edit the makelist text
> and remove the UHD.
>
> here I got more error, what should I do?
>
> <<<<<<<<<<
> --- Software Radio Systems LTE eNodeB ---
>
> Reading configuration file /home/duo/.srs/enb.conf...
> Soapy has found device #0: addr=1d50:6108, driver=lime, label=LimeSDR-USB
> [USB 3.0] 9061C02C73125, media=USB 3.0, module=STREAM, name=LimeSDR-USB,
> serial=0009061C02C73125,
> [INFO] Make connection: 'LimeSDR-USB [USB 3.0] 9061C02C73125'
> [INFO] Device name: LimeSDR-USB
> [INFO] Reference: 30.72 MHz
> [INFO] Init LMS7002M(0)
> [INFO] Ver=7, Rev=1, Mask=1
> [INFO] LMS7002M calibration values caching Enable
> Set Rx bandwidth to 2.50 MHz
> [ERROR] setBandwidth(Tx, 0, 1.44 MHz) Failed - Tx lpf(1.44 MHz) out of
> range 5-40 MHz and 50-130 MHz
> setBandwidth fail: Tx lpf(1.44 MHz) out of range 5-40 MHz and 50-130 MHz
> Setting up RX stream
> Setting up TX stream
> Available device sensors:
> - clock_locked
> - lms7_temp
> Available sensors for RX channel 0:
> - lo_locked
> State of gain elements for Rx channel 0 (AGC not supported):
> - LNA: 30.00 dB
> - TIA: 0.00 dB
> - PGA: 5.00 dB
> State of gain elements for Tx channel 0 (AGC not supported):
> - LNA: nan dB
> - TIA: nan dB
> - PGA: nan dB
> Rx antenna set to LNAL
> Tx antenna set to BAND1
>
> Warning burst preamble is not calibrated for device lime. Set a value
> manually
>
> Setting frequency: DL=1845.0 Mhz, UL=1750.0 MHz
> Tuned Tx to 1845.00 MHz
> Tuned Rx to 1750.00 MHz
> Set master clock rate to 11.52 MHz
> Setting Sampling frequency 11.52 MHz
> setSampleRate Rx fail: SoapyLMS7::setSampleRate() -- rate too high
> setSampleRate Tx fail: SoapyLMS7::setSampleRate() -- rate too high
>
> Warning TX/RX time offset for sampling rate -1 KHz not calibrated. Using
> interpolated value
>
>
> ==== eNodeB started ===
> Type <t> to view trace
>
> >>>>>>>>>>>>>>
>
> Please advise! Thanks. :-)
>
> regards,
> Sandi / DUO
>
>
> On Mon, Nov 5, 2018 at 8:07 PM Sandi Suhendro <djks74 at gmail.com> wrote:
>
>> I did try remove the soapyUHD and delete the libuhd and libuhdsupport
>> from usr/local/lib, but when re install the srs-LTE, it gives me error it
>> need UHD.
>> do you know it may cause I miss it how to build srsLTE direct to soapySDR?
>>
>> anyway, it has output signal on earfcn 1600, but dont see the network
>> with UHD.
>>
>> maybe better using soapySDR instead UHD, but the installation asking UHD.
>>
>> please advise.
>>
>> regards,
>> Sandi
>>
>> On Mon, Nov 5, 2018 at 3:11 AM Andre Puschmann <
>> andre.puschmann at softwareradiosystems.com> wrote:
>>
>>> Hey,
>>>
>>> seems like you are trying to run the Lime through UHD, i.e. using the
>>> uhd-soapy wrapper. I am not sure if it is working well but maybe it
>>> does. Does it output a signal?
>>>
>>> We do have a Soapy driver which also works with the Lime so maybe try
>>> using that instead. Probably the easiest is to uninstall the uhd-soapy
>>> wrapper. The problem here is that the srsLTE's RF driver library stops
>>> looking for other devices as soon as a supported device is found and the
>>> UHD driver is the first to query.
>>>
>>>
>>> Hope that helps.
>>>
>>> Cheers
>>> Andre
>>>
>>>
>>>
>>>
>>> On 4/11/18 15:07, Sandi Suhendro wrote:
>>> > Dear Andre,
>>> > Do you know what I miss?
>>> > I have this following error :
>>> > <<<<<<<<<
>>> > sudo srsenb
>>> > linux; GNU C++ version 5.4.0 20160609; Boost_105800;
>>> > UHD_003.010.002.HEAD-0-gbd6e21dc
>>> >
>>> >
>>> > Built in Release mode using commit 1c015aab on branch master.
>>> >
>>> > --- Software Radio Systems LTE eNodeB ---
>>> >
>>> > Reading configuration file /home/duo/.srs/enb.conf...
>>> > Opening USRP with args:
>>> > -- Make connection: 'LimeSDR-USB [USB 3.0] 9061C02C73125'
>>> > -- Device name: LimeSDR-USB
>>> > -- Reference: 30.72 MHz
>>> > -- Init LMS7002M(0)
>>> > -- Ver=7, Rev=1, Mask=1
>>> > -- LMS7002M calibration values caching Enable
>>> > Setting frequency: DL=1845.0 Mhz, UL=1750.0 MHz
>>> > Setting Sampling frequency 11.52 MHz
>>> >
>>> > Warning TX/RX time offset has not been calibrated for device
>>> > uhd_unknown. Set a value manually
>>> >
>>> >
>>> > ==== eNodeB started ===
>>> > Type <t> to view trace
>>> > Error timed out while receiving samples from UHD.
>>> > Error timed out while receiving samples from UHD.
>>> > Error timed out while receiving samples from UHD.
>>> >>>>>>>>>>>>
>>> >
>>> > And in the log of nextepc is :
>>> > [11/04 20:48:59.179] eNB-S1 accepted[127.0.1.1]:55722 in s1_path module
>>> > [11/04 20:48:59.180] eNB-S1 accepted[127.0.1.1] in master_sm module
>>> >
>>> >
>>> > Please advise! Thanks in advance. :-)
>>> >
>>> > regards,
>>> > Sandi / DUO
>>> >
>>> >
>>> > On Fri, Nov 2, 2018 at 3:51 PM Andre Puschmann
>>> > <andre.puschmann at softwareradiosystems.com
>>> > <mailto:andre.puschmann at softwareradiosystems.com>> wrote:
>>> >
>>> > Sandi,
>>> >
>>> > glad to hear you got it working. Let us know how it goes.
>>> >
>>> > Cheers
>>> > Andre
>>> >
>>> > On 2/11/18 8:54, Sandi Suhendro wrote:
>>> > > Dear Andre,
>>> > > sorry for this simple matter. try to remove all and re install
>>> and it
>>> > > works now. Thanks.
>>> > >
>>> > > regards,
>>> > > Sandi / DUO
>>> > >
>>> > > On Thu, Nov 1, 2018 at 10:33 PM Sandi Suhendro <djks74 at gmail.com
>>> > <mailto:djks74 at gmail.com>
>>> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>> wrote:
>>> > >
>>> > > Dear Andre,
>>> > > Thanks for response.
>>> > >
>>> > > Im using ubuntu 16.04 and build soapySDR from git.
>>> > > as I remember Im using ppa at first but I also install again
>>> > from git.
>>> > > what should I do? remove all soapy from apt and make
>>> uninstall
>>> > from
>>> > > git too then re install?
>>> > >
>>> > > please advise.
>>> > >
>>> > > regards,
>>> > > Sandi / DUO
>>> > >
>>> > > On Thu, Nov 1, 2018 at 9:33 PM Andre Puschmann
>>> > > <andre.puschmann at softwareradiosystems.com
>>> > <mailto:andre.puschmann at softwareradiosystems.com>
>>> > > <mailto:andre.puschmann at softwareradiosystems.com
>>> > <mailto:andre.puschmann at softwareradiosystems.com>>> wrote:
>>> > >
>>> > > Likely to be a mismatch of headers. What system are you
>>> on and
>>> > > where do
>>> > > you get the soapy dev package from? git, ppa?
>>> > >
>>> > >
>>> > > On 31/10/18 12:43, Sandi Suhendro wrote:
>>> > > > Dear list,
>>> > > > hope someone can give me advise what is wrong?
>>> > > > Im runing fine with osmocom or openbts-umts. (2g/3g)
>>> > > > but....
>>> > > > Im facing SoapySDR range error when build srsLTE :
>>> > > >
>>> > > > [ 40%] Linking C executable pdsch_test
>>> > > > [ 40%] Built target pdsch_test
>>> > > > [ 40%] Building C object
>>> > > >
>>> lib/src/phy/rf/CMakeFiles/srslte_rf_utils.dir/rf_utils.c.o
>>> > > > [ 40%] Linking C static library libsrslte_rf_utils.a
>>> > > > [ 40%] Built target srslte_rf_utils
>>> > > > [ 41%] Building C object
>>> > > lib/src/phy/rf/CMakeFiles/srslte_rf.dir/rf_imp.c.o
>>> > > > [ 41%] Building C object
>>> > > > lib/src/phy/rf/CMakeFiles/srslte_rf.dir/rf_uhd_imp.c.o
>>> > > > [ 41%] Building CXX object
>>> > > > lib/src/phy/rf/CMakeFiles/srslte_rf.dir/uhd_c_api.cpp.o
>>> > > > [ 41%] Building C object
>>> > > >
>>> lib/src/phy/rf/CMakeFiles/srslte_rf.dir/rf_soapy_imp.c.o
>>> > > > In file included from
>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>> > > > /usr/include/SoapySDR/Types.h:25:3: error: conflicting
>>> > types for
>>> > > > ‘SoapySDRRange’
>>> > > > } SoapySDRRange;
>>> > > > ^
>>> > > > In file included from
>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>> > > > from
>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>> > > > /usr/local/include/SoapySDR/Types.h:25:3: note:
>>> previous
>>> > > declaration of
>>> > > > ‘SoapySDRRange’ was here
>>> > > > } SoapySDRRange;
>>> > > > ^
>>> > > > In file included from
>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>> > > > /usr/include/SoapySDR/Types.h:33:3: error: conflicting
>>> > types for
>>> > > > ‘SoapySDRKwargs’
>>> > > > } SoapySDRKwargs;
>>> > > > ^
>>> > > > In file included from
>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>> > > > from
>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>> > > > /usr/local/include/SoapySDR/Types.h:33:3: note:
>>> previous
>>> > > declaration of
>>> > > > ‘SoapySDRKwargs’ was here
>>> > > > } SoapySDRKwargs;
>>> > > > ^
>>> > > > In file included from
>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>> > > > /usr/include/SoapySDR/Types.h:39:30: error: conflicting
>>> > types for
>>> > > > ‘SoapySDRKwargs_fromString’
>>> > > > SOAPY_SDR_API SoapySDRKwargs
>>> > SoapySDRKwargs_fromString(const
>>> > > char *markup);
>>> > > > ^
>>> > > > In file included from
>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>> > > > from
>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>> > > > /usr/local/include/SoapySDR/Types.h:39:30: note:
>>> previous
>>> > > declaration of
>>> > > > ‘SoapySDRKwargs_fromString’ was here
>>> > > > SOAPY_SDR_API SoapySDRKwargs
>>> > SoapySDRKwargs_fromString(const
>>> > > char *markup);
>>> > > > ^
>>> > > > In file included from
>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>> > > > /usr/include/SoapySDR/Types.h:45:21: error: conflicting
>>> > types for
>>> > > > ‘SoapySDRKwargs_toString’
>>> > > > SOAPY_SDR_API char *SoapySDRKwargs_toString(const
>>> > > SoapySDRKwargs *args);
>>> > > > ^
>>> > > > In file included from
>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>> > > > from
>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>> > > > /usr/local/include/SoapySDR/Types.h:45:21: note:
>>> previous
>>> > > declaration of
>>> > > > ‘SoapySDRKwargs_toString’ was here
>>> > > > SOAPY_SDR_API char *SoapySDRKwargs_toString(const
>>> > > SoapySDRKwargs *args);
>>> > > > ^
>>> > > > In file included from
>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>> > > > /usr/include/SoapySDR/Types.h:50:5: error:
>>> redeclaration of
>>> > > enumerator
>>> > > > ‘SOAPY_SDR_ARG_INFO_BOOL’
>>> > > > SOAPY_SDR_ARG_INFO_BOOL,
>>> > > > ^
>>> > > > In file included from
>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>> > > > from
>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>> > > > /usr/local/include/SoapySDR/Types.h:50:5: note:
>>> previous
>>> > > definition of
>>> > > > ‘SOAPY_SDR_ARG_INFO_BOOL’ was here
>>> > > > SOAPY_SDR_ARG_INFO_BOOL,
>>> > > > ^
>>> > > > In file included from
>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>> > > > /usr/include/SoapySDR/Types.h:51:5: error:
>>> redeclaration of
>>> > > enumerator
>>> > > > ‘SOAPY_SDR_ARG_INFO_INT’
>>> > > > SOAPY_SDR_ARG_INFO_INT,
>>> > > > ^
>>> > > > In file included from
>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>> > > > from
>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>> > > > /usr/local/include/SoapySDR/Types.h:51:5: note:
>>> previous
>>> > > definition of
>>> > > > ‘SOAPY_SDR_ARG_INFO_INT’ was here
>>> > > > SOAPY_SDR_ARG_INFO_INT,
>>> > > > ^
>>> > > > In file included from
>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>> > > > /usr/include/SoapySDR/Types.h:52:5: error:
>>> redeclaration of
>>> > > enumerator
>>> > > > ‘SOAPY_SDR_ARG_INFO_FLOAT’
>>> > > > SOAPY_SDR_ARG_INFO_FLOAT,
>>> > > > ^
>>> > > > In file included from
>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>> > > > from
>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>> > > > /usr/local/include/SoapySDR/Types.h:52:5: note:
>>> previous
>>> > > definition of
>>> > > > ‘SOAPY_SDR_ARG_INFO_FLOAT’ was here
>>> > > > SOAPY_SDR_ARG_INFO_FLOAT,
>>> > > > ^
>>> > > > In file included from
>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>> > > > /usr/include/SoapySDR/Types.h:53:5: error:
>>> redeclaration of
>>> > > enumerator
>>> > > > ‘SOAPY_SDR_ARG_INFO_STRING’
>>> > > > SOAPY_SDR_ARG_INFO_STRING
>>> > > > ^
>>> > > > In file included from
>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>> > > > from
>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>> > > > /usr/local/include/SoapySDR/Types.h:53:5: note:
>>> previous
>>> > > definition of
>>> > > > ‘SOAPY_SDR_ARG_INFO_STRING’ was here
>>> > > > SOAPY_SDR_ARG_INFO_STRING
>>> > > > ^
>>> > > > In file included from
>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>> > > > /usr/include/SoapySDR/Types.h:54:3: error: conflicting
>>> > types for
>>> > > > ‘SoapySDRArgInfoType’
>>> > > > } SoapySDRArgInfoType;
>>> > > > ^
>>> > > > In file included from
>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>> > > > from
>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>> > > > /usr/local/include/SoapySDR/Types.h:54:3: note:
>>> previous
>>> > > declaration of
>>> > > > ‘SoapySDRArgInfoType’ was here
>>> > > > } SoapySDRArgInfoType;
>>> > > > ^
>>> > > > In file included from
>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>> > > > /usr/include/SoapySDR/Types.h:103:3: error: conflicting
>>> > types for
>>> > > > ‘SoapySDRArgInfo’
>>> > > > } SoapySDRArgInfo;
>>> > > > ^
>>> > > > In file included from
>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>> > > > from
>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>> > > > /usr/local/include/SoapySDR/Types.h:103:3: note:
>>> previous
>>> > > declaration of
>>> > > > ‘SoapySDRArgInfo’ was here
>>> > > > } SoapySDRArgInfo;
>>> > > > ^
>>> > > > In file included from
>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>> > > > /usr/include/SoapySDR/Types.h:114:20: error:
>>> conflicting
>>> > types for
>>> > > > ‘SoapySDRKwargs_set’
>>> > > > SOAPY_SDR_API void SoapySDRKwargs_set(SoapySDRKwargs
>>> *args,
>>> > > const char
>>> > > > *key, co
>>> > > > ^
>>> > > > In file included from
>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>> > > > from
>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>> > > > /usr/local/include/SoapySDR/Types.h:120:19: note:
>>> previous
>>> > > declaration
>>> > > > of ‘SoapySDRKwargs_set’ was here
>>> > > > SOAPY_SDR_API int SoapySDRKwargs_set(SoapySDRKwargs
>>> *args,
>>> > > const char
>>> > > > *key, con
>>> > > > ^
>>> > > > In file included from
>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>> > > > /usr/include/SoapySDR/Types.h:120:27: error:
>>> conflicting
>>> > types for
>>> > > > ‘SoapySDRKwargs_get’
>>> > > > SOAPY_SDR_API const char
>>> *SoapySDRKwargs_get(SoapySDRKwargs
>>> > > *args,
>>> > > > const char *
>>> > > > ^
>>> > > > In file included from
>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>> > > > from
>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>> > > > /usr/local/include/SoapySDR/Types.h:126:27: note:
>>> previous
>>> > > declaration
>>> > > > of ‘SoapySDRKwargs_get’ was here
>>> > > > SOAPY_SDR_API const char *SoapySDRKwargs_get(const
>>> > SoapySDRKwargs
>>> > > > *args, const
>>> > > > ^
>>> > > > In file included from
>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>> > > > /usr/include/SoapySDR/Types.h:126:20: error:
>>> conflicting
>>> > types for
>>> > > > ‘SoapySDRKwargs_clear’
>>> > > > SOAPY_SDR_API void SoapySDRKwargs_clear(SoapySDRKwargs
>>> > *args);
>>> > > > ^
>>> > > > In file included from
>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>> > > > from
>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>> > > > /usr/local/include/SoapySDR/Types.h:132:20: note:
>>> previous
>>> > > declaration
>>> > > > of ‘SoapySDRKwargs_clear’ was here
>>> > > > SOAPY_SDR_API void SoapySDRKwargs_clear(SoapySDRKwargs
>>> > *args);
>>> > > > ^
>>> > > > In file included from
>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>> > > > /usr/include/SoapySDR/Types.h:132:20: error:
>>> conflicting
>>> > types for
>>> > > > ‘SoapySDRKwargsList_clear’
>>> > > > SOAPY_SDR_API void
>>> SoapySDRKwargsList_clear(SoapySDRKwargs
>>> > > *args, const
>>> > > > size_t
>>> > > > ^
>>> > > > In file included from
>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>> > > > from
>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>> > > > /usr/local/include/SoapySDR/Types.h:138:20: note:
>>> previous
>>> > > declaration
>>> > > > of ‘SoapySDRKwargsList_clear’ was here
>>> > > > SOAPY_SDR_API void
>>> SoapySDRKwargsList_clear(SoapySDRKwargs
>>> > > *args, const
>>> > > > size_t
>>> > > > ^
>>> > > > In file included from
>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>> > > > /usr/include/SoapySDR/Types.h:138:20: error:
>>> conflicting
>>> > types for
>>> > > > ‘SoapySDRArgInfo_clear’
>>> > > > SOAPY_SDR_API void
>>> > SoapySDRArgInfo_clear(SoapySDRArgInfo *info);
>>> > > > ^
>>> > > > In file included from
>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>> > > > from
>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>> > > > /usr/local/include/SoapySDR/Types.h:144:20: note:
>>> previous
>>> > > declaration
>>> > > > of ‘SoapySDRArgInfo_clear’ was here
>>> > > > SOAPY_SDR_API void
>>> > SoapySDRArgInfo_clear(SoapySDRArgInfo *info);
>>> > > > ^
>>> > > > In file included from
>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>> > > > /usr/include/SoapySDR/Types.h:144:20: error:
>>> conflicting
>>> > types for
>>> > > > ‘SoapySDRArgInfoList_clear’
>>> > > > SOAPY_SDR_API void
>>> > SoapySDRArgInfoList_clear(SoapySDRArgInfo
>>> > > *info,
>>> > > > const size_
>>> > > > ^
>>> > > > In file included from
>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>> > > > from
>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>> > > > /usr/local/include/SoapySDR/Types.h:150:20: note:
>>> previous
>>> > > declaration
>>> > > > of ‘SoapySDRArgInfoList_clear’ was here
>>> > > > SOAPY_SDR_API void
>>> > SoapySDRArgInfoList_clear(SoapySDRArgInfo
>>> > > *info,
>>> > > > const size_
>>> > > > ^
>>> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c: In
>>> function
>>> > > > ‘rf_soapy_open_multi’:
>>> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:296:38:
>>> > error:
>>> > > > initialization from incompatible pointer type
>>> > > > [-Werror=incompatible-pointer-types]
>>> > > > const SoapySDRKwargs *soapy_args =
>>> > > SoapySDRDevice_enumerate(NULL,
>>> > > > &length);
>>> > > > ^
>>> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:316:45:
>>> > error:
>>> > > passing
>>> > > > argument 1 of ‘SoapySDRDevice_make’ from incompatible
>>> > pointer type
>>> > > > [-Werror=incompatible-pointer-types]
>>> > > > SoapySDRDevice *sdr =
>>> > SoapySDRDevice_make(&(soapy_args[0]));
>>> > > > ^
>>> > > > In file included from
>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:0:
>>> > > > /usr/local/include/SoapySDR/Device.h:78:31: note:
>>> > expected ‘const
>>> > > > SoapySDRKwargs * {aka const struct <anonymous> *}’ but
>>> > > argument is of
>>> > > > type ‘const SoapySDRKwargs * {aka const struct
>>> > <anonymous> *}’
>>> > > > SOAPY_SDR_API SoapySDRDevice
>>> *SoapySDRDevice_make(const
>>> > > SoapySDRKwargs
>>> > > > *args);
>>> > > > ^
>>> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:380:28:
>>> > error:
>>> > > invalid
>>> > > > initializer
>>> > > > SoapySDRRange tx_range =
>>> > > SoapySDRDevice_getGainRange(handler->device,
>>> > > > SOAPY_S
>>> > >�� > ^
>>> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:381:28:
>>> > error:
>>> > > invalid
>>> > > > initializer
>>> > > > SoapySDRRange rx_range =
>>> > > SoapySDRDevice_getGainRange(handler->device,
>>> > > > SOAPY_S
>>> > > > ^
>>> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c: In
>>> function
>>> > > > ‘rf_soapy_set_rx_srate’:
>>> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:581:29:
>>> > error:
>>> > > > initialization from incompatible pointer type
>>> > > > [-Werror=incompatible-pointer-types]
>>> > > > SoapySDRRange *bw_range =
>>> > > > SoapySDRDevice_getBandwidthRange(handler->device, S
>>> > > > ^
>>> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c: In
>>> function
>>> > > > ‘rf_soapy_set_tx_srate’:
>>> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:617:29:
>>> > error:
>>> > > > initialization from incompatible pointer type
>>> > > > [-Werror=incompatible-pointer-types]
>>> > > > SoapySDRRange *bw_range =
>>> > > > SoapySDRDevice_getBandwidthRange(handler->device, S
>>> > > > ^
>>> > > > cc1: some warnings being treated as errors
>>> > > > lib/src/phy/rf/CMakeFiles/srslte_rf.dir/build.make:134:
>>> > recipe for
>>> > > > target
>>> > >
>>> 'lib/src/phy/rf/CMakeFiles/srslte_rf.dir/rf_soapy_imp.c.o'
>>> > failed
>>> > > > make[2]: ***
>>> > >
>>> [lib/src/phy/rf/CMakeFiles/srslte_rf.dir/rf_soapy_imp.c.o]
>>> > > > Error 1
>>> > > > CMakeFiles/Makefile2:2905: recipe for target
>>> > > > 'lib/src/phy/rf/CMakeFiles/srslte_rf.dir/all' failed
>>> > > > make[1]: ***
>>> > [lib/src/phy/rf/CMakeFiles/srslte_rf.dir/all] Error 2
>>> > > > Makefile:160: recipe for target 'all' failed
>>> > > > make: *** [all] Error 2
>>> > > >
>>> > > >
>>> > > > Please advise! Thanks
>>> > > > --
>>> > > > Best Regards,
>>> > > > DUO
>>> > > >
>>> > > >
>>> > > > _______________________________________________
>>> > > > srslte-users mailing list
>>> > > > srslte-users at lists.softwareradiosystems.com
>>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>>> > <mailto:srslte-users at lists.softwareradiosystems.com>>
>>> > > >
>>> > http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
>>> > > >
>>> > >
>>> > >
>>> > >
>>> > > --
>>> > > Best Regards,
>>> > > Sandi
>>> > >
>>> > >
>>> > >
>>> > > --
>>> > > Best Regards,
>>> > > Sandi
>>> > >
>>> >
>>> >
>>> > --
>>> > Andre Puschmann
>>> >
>>> > Software Radio Systems (SRS)
>>> > http://www.softwareradiosystems.com
>>> >
>>> > PGP/GnuPG key: 6C42AB31
>>> > fingerprint: 137A AE49 785B A445 257C 8AD7 D877 A498 6C42 AB31
>>> >
>>> >
>>> >
>>> > --
>>> > Best Regards,
>>> > Sandi
>>> >
>>>
>>>
>>> --
>>> Andre Puschmann
>>>
>>> Software Radio Systems (SRS)
>>> http://www.softwareradiosystems.com
>>>
>>> PGP/GnuPG key: 6C42AB31
>>> fingerprint: 137A AE49 785B A445 257C 8AD7 D877 A498 6C42 AB31
>>>
>>
>>
>> --
>> Best Regards,
>> Sandi
>>
>>
>
> --
> Best Regards,
> Sandi
>
>
> _______________________________________________
> srslte-users mailing listsrslte-users at lists.softwareradiosystems.comhttp://www.softwareradiosystems.com/mailman/listinfo/srslte-users
>
> _______________________________________________
> srslte-users mailing list
> srslte-users at lists.softwareradiosystems.com
> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20181106/bac45db9/attachment.htm>
More information about the srsran-users
mailing list