[srslte-users] Need help build error when make on srsLTE with LimeSDR
Sandi Suhendro
djks74 at gmail.com
Wed Nov 7 15:53:39 UTC 2018
Dear Ignas, Andre,
the phone is attached but it produce an error when turn on the cellular
data on my phone: (VIVO XShot)
here is the log : (pcap attached)
==== eNodeB started ===
Type <t> to view trace
[INFO] Tx calibration finished
[INFO] Rx calibration finished
[WARNING] L
[WARNING] L
RACH: tti=10221, preamble=23, offset=1, temp_crnti=0x46
RACH: tti=1, preamble=23, offset=1, temp_crnti=0x47
Disconnecting rnti=0x46.
Disconnecting rnti=0x47.
RACH: tti=381, preamble=44, offset=1, temp_crnti=0x48
Disconnecting rnti=0x48.
RACH: tti=2891, preamble=22, offset=1, temp_crnti=0x49
Unhandled feature in RRC function:
liblte_rrc_unpack_rrc_connection_setup_complete_msg
Disconnecting rnti=0x49.
RACH: tti=4671, preamble=9, offset=1, temp_crnti=0x4a
Unhandled feature in RRC function:
liblte_rrc_unpack_rrc_connection_setup_complete_msg
User 0x4a connected
Bus error
>>>>>>>>>>>>>>>>.
hope you can give me advise what is wrong? Thanks in advance.
regards,
DUO / Sandi
On Tue, Nov 6, 2018 at 8:43 PM Sandi Suhendro <djks74 at gmail.com> wrote:
> Dear Ignas,
> Thanks to let me know to update. Now it works and i saw my 4g network now.
> :)
>
> Just strange not all phone see the network. Will try to attach now. :)
>
> Thanks and warm regards,
> Sandi
>
> On Tue, Nov 6, 2018, 19:56 Ignas Jarusevicius <
> i.jarusevicius at limemicro.com wrote:
>
>> Hi Sandri,
>>
>> I have noticed that you are using old libLimeSuite version as recent
>> versions show 'module=FX3' for LimeSDR-USB. So try updating LimeSuite.
>> Also, I was I able to get srsenb working with LimeSDR boards few months
>> ago. I have attached one of my enb.conf that used to work (not sure if it
>> still works with current srsLTE version).
>>
>> -Ignas
>> On 2018-11-05 16:02, Sandi Suhendro wrote:
>>
>> Hi Andre,
>> ok finally working to Lime direct via Soapy, just edit the makelist text
>> and remove the UHD.
>>
>> here I got more error, what should I do?
>>
>> <<<<<<<<<<
>> --- Software Radio Systems LTE eNodeB ---
>>
>> Reading configuration file /home/duo/.srs/enb.conf...
>> Soapy has found device #0: addr=1d50:6108, driver=lime, label=LimeSDR-USB
>> [USB 3.0] 9061C02C73125, media=USB 3.0, module=STREAM, name=LimeSDR-USB,
>> serial=0009061C02C73125,
>> [INFO] Make connection: 'LimeSDR-USB [USB 3.0] 9061C02C73125'
>> [INFO] Device name: LimeSDR-USB
>> [INFO] Reference: 30.72 MHz
>> [INFO] Init LMS7002M(0)
>> [INFO] Ver=7, Rev=1, Mask=1
>> [INFO] LMS7002M calibration values caching Enable
>> Set Rx bandwidth to 2.50 MHz
>> [ERROR] setBandwidth(Tx, 0, 1.44 MHz) Failed - Tx lpf(1.44 MHz) out of
>> range 5-40 MHz and 50-130 MHz
>> setBandwidth fail: Tx lpf(1.44 MHz) out of range 5-40 MHz and 50-130 MHz
>> Setting up RX stream
>> Setting up TX stream
>> Available device sensors:
>> - clock_locked
>> - lms7_temp
>> Available sensors for RX channel 0:
>> - lo_locked
>> State of gain elements for Rx channel 0 (AGC not supported):
>> - LNA: 30.00 dB
>> - TIA: 0.00 dB
>> - PGA: 5.00 dB
>> State of gain elements for Tx channel 0 (AGC not supported):
>> - LNA: nan dB
>> - TIA: nan dB
>> - PGA: nan dB
>> Rx antenna set to LNAL
>> Tx antenna set to BAND1
>>
>> Warning burst preamble is not calibrated for device lime. Set a value
>> manually
>>
>> Setting frequency: DL=1845.0 Mhz, UL=1750.0 MHz
>> Tuned Tx to 1845.00 MHz
>> Tuned Rx to 1750.00 MHz
>> Set master clock rate to 11.52 MHz
>> Setting Sampling frequency 11.52 MHz
>> setSampleRate Rx fail: SoapyLMS7::setSampleRate() -- rate too high
>> setSampleRate Tx fail: SoapyLMS7::setSampleRate() -- rate too high
>>
>> Warning TX/RX time offset for sampling rate -1 KHz not calibrated. Using
>> interpolated value
>>
>>
>> ==== eNodeB started ===
>> Type <t> to view trace
>>
>> >>>>>>>>>>>>>>
>>
>> Please advise! Thanks. :-)
>>
>> regards,
>> Sandi / DUO
>>
>>
>> On Mon, Nov 5, 2018 at 8:07 PM Sandi Suhendro <djks74 at gmail.com> wrote:
>>
>>> I did try remove the soapyUHD and delete the libuhd and libuhdsupport
>>> from usr/local/lib, but when re install the srs-LTE, it gives me error it
>>> need UHD.
>>> do you know it may cause I miss it how to build srsLTE direct to
>>> soapySDR?
>>>
>>> anyway, it has output signal on earfcn 1600, but dont see the network
>>> with UHD.
>>>
>>> maybe better using soapySDR instead UHD, but the installation asking UHD.
>>>
>>> please advise.
>>>
>>> regards,
>>> Sandi
>>>
>>> On Mon, Nov 5, 2018 at 3:11 AM Andre Puschmann <
>>> andre.puschmann at softwareradiosystems.com> wrote:
>>>
>>>> Hey,
>>>>
>>>> seems like you are trying to run the Lime through UHD, i.e. using the
>>>> uhd-soapy wrapper. I am not sure if it is working well but maybe it
>>>> does. Does it output a signal?
>>>>
>>>> We do have a Soapy driver which also works with the Lime so maybe try
>>>> using that instead. Probably the easiest is to uninstall the uhd-soapy
>>>> wrapper. The problem here is that the srsLTE's RF driver library stops
>>>> looking for other devices as soon as a supported device is found and the
>>>> UHD driver is the first to query.
>>>>
>>>>
>>>> Hope that helps.
>>>>
>>>> Cheers
>>>> Andre
>>>>
>>>>
>>>>
>>>>
>>>> On 4/11/18 15:07, Sandi Suhendro wrote:
>>>> > Dear Andre,
>>>> > Do you know what I miss?
>>>> > I have this following error :
>>>> > <<<<<<<<<
>>>> > sudo srsenb
>>>> > linux; GNU C++ version 5.4.0 20160609; Boost_105800;
>>>> > UHD_003.010.002.HEAD-0-gbd6e21dc
>>>> >
>>>> >
>>>> > Built in Release mode using commit 1c015aab on branch master.
>>>> >
>>>> > --- Software Radio Systems LTE eNodeB ---
>>>> >
>>>> > Reading configuration file /home/duo/.srs/enb.conf...
>>>> > Opening USRP with args:
>>>> > -- Make connection: 'LimeSDR-USB [USB 3.0] 9061C02C73125'
>>>> > -- Device name: LimeSDR-USB
>>>> > -- Reference: 30.72 MHz
>>>> > -- Init LMS7002M(0)
>>>> > -- Ver=7, Rev=1, Mask=1
>>>> > -- LMS7002M calibration values caching Enable
>>>> > Setting frequency: DL=1845.0 Mhz, UL=1750.0 MHz
>>>> > Setting Sampling frequency 11.52 MHz
>>>> >
>>>> > Warning TX/RX time offset has not been calibrated for device
>>>> > uhd_unknown. Set a value manually
>>>> >
>>>> >
>>>> > ==== eNodeB started ===
>>>> > Type <t> to view trace
>>>> > Error timed out while receiving samples from UHD.
>>>> > Error timed out while receiving samples from UHD.
>>>> > Error timed out while receiving samples from UHD.
>>>> >>>>>>>>>>>>
>>>> >
>>>> > And in the log of nextepc is :
>>>> > [11/04 20:48:59.179] eNB-S1 accepted[127.0.1.1]:55722 in s1_path
>>>> module
>>>> > [11/04 20:48:59.180] eNB-S1 accepted[127.0.1.1] in master_sm module
>>>> >
>>>> >
>>>> > Please advise! Thanks in advance. :-)
>>>> >
>>>> > regards,
>>>> > Sandi / DUO
>>>> >
>>>> >
>>>> > On Fri, Nov 2, 2018 at 3:51 PM Andre Puschmann
>>>> > <andre.puschmann at softwareradiosystems.com
>>>> > <mailto:andre.puschmann at softwareradiosystems.com>> wrote:
>>>> >
>>>> > Sandi,
>>>> >
>>>> > glad to hear you got it working. Let us know how it goes.
>>>> >
>>>> > Cheers
>>>> > Andre
>>>> >
>>>> > On 2/11/18 8:54, Sandi Suhendro wrote:
>>>> > > Dear Andre,
>>>> > > sorry for this simple matter. try to remove all and re install
>>>> and it
>>>> > > works now. Thanks.
>>>> > >
>>>> > > regards,
>>>> > > Sandi / DUO
>>>> > >
>>>> > > On Thu, Nov 1, 2018 at 10:33 PM Sandi Suhendro <
>>>> djks74 at gmail.com
>>>> > <mailto:djks74 at gmail.com>
>>>> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>> wrote:
>>>> > >
>>>> > > Dear Andre,
>>>> > > Thanks for response.
>>>> > >
>>>> > > Im using ubuntu 16.04 and build soapySDR from git.
>>>> > > as I remember Im using ppa at first but I also install again
>>>> > from git.
>>>> > > what should I do? remove all soapy from apt and make
>>>> uninstall
>>>> > from
>>>> > > git too then re install?
>>>> > >
>>>> > > please advise.
>>>> > >
>>>> > > regards,
>>>> > > Sandi / DUO
>>>> > >
>>>> > > On Thu, Nov 1, 2018 at 9:33 PM Andre Puschmann
>>>> > > <andre.puschmann at softwareradiosystems.com
>>>> > <mailto:andre.puschmann at softwareradiosystems.com>
>>>> > > <mailto:andre.puschmann at softwareradiosystems.com
>>>> > <mailto:andre.puschmann at softwareradiosystems.com>>> wrote:
>>>> > >
>>>> > > Likely to be a mismatch of headers. What system are you
>>>> on and
>>>> > > where do
>>>> > > you get the soapy dev package from? git, ppa?
>>>> > >
>>>> > >
>>>> > > On 31/10/18 12:43, Sandi Suhendro wrote:
>>>> > > > Dear list,
>>>> > > > hope someone can give me advise what is wrong?
>>>> > > > Im runing fine with osmocom or openbts-umts. (2g/3g)
>>>> > > > but....
>>>> > > > Im facing SoapySDR range error when build srsLTE :
>>>> > > >
>>>> > > > [ 40%] Linking C executable pdsch_test
>>>> > > > [ 40%] Built target pdsch_test
>>>> > > > [ 40%] Building C object
>>>> > > >
>>>> lib/src/phy/rf/CMakeFiles/srslte_rf_utils.dir/rf_utils.c.o
>>>> > > > [ 40%] Linking C static library libsrslte_rf_utils.a
>>>> > > > [ 40%] Built target srslte_rf_utils
>>>> > > > [ 41%] Building C object
>>>> > > lib/src/phy/rf/CMakeFiles/srslte_rf.dir/rf_imp.c.o
>>>> > > > [ 41%] Building C object
>>>> > > > lib/src/phy/rf/CMakeFiles/srslte_rf.dir/rf_uhd_imp.c.o
>>>> > > > [ 41%] Building CXX object
>>>> > > >
>>>> lib/src/phy/rf/CMakeFiles/srslte_rf.dir/uhd_c_api.cpp.o
>>>> > > > [ 41%] Building C object
>>>> > > >
>>>> lib/src/phy/rf/CMakeFiles/srslte_rf.dir/rf_soapy_imp.c.o
>>>> > > > In file included from
>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>>> > > > /usr/include/SoapySDR/Types.h:25:3: error: conflicting
>>>> > types for
>>>> > > > ‘SoapySDRRange’
>>>> > > > } SoapySDRRange;
>>>> > > > ^
>>>> > > > In file included from
>>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>>> > > > from
>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>>> > > > /usr/local/include/SoapySDR/Types.h:25:3: note:
>>>> previous
>>>> > > declaration of
>>>> > > > ‘SoapySDRRange’ was here
>>>> > > > } SoapySDRRange;
>>>> > > > ^
>>>> > > > In file included from
>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>>> > > > /usr/include/SoapySDR/Types.h:33:3: error: conflicting
>>>> > types for
>>>> > > > ‘SoapySDRKwargs’
>>>> > > > } SoapySDRKwargs;
>>>> > > > ^
>>>> > > > In file included from
>>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>>> > > > from
>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>>> > > > /usr/local/include/SoapySDR/Types.h:33:3: note:
>>>> previous
>>>> > > declaration of
>>>> > > > ‘SoapySDRKwargs’ was here
>>>> > > > } SoapySDRKwargs;
>>>> > > > ^
>>>> > > > In file included from
>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>>> > > > /usr/include/SoapySDR/Types.h:39:30: error:
>>>> conflicting
>>>> > types for
>>>> > > > ‘SoapySDRKwargs_fromString’
>>>> > > > SOAPY_SDR_API SoapySDRKwargs
>>>> > SoapySDRKwargs_fromString(const
>>>> > > char *markup);
>>>> > > > ^
>>>> > > > In file included from
>>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>>> > > > from
>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>>> > > > /usr/local/include/SoapySDR/Types.h:39:30: note:
>>>> previous
>>>> > > declaration of
>>>> > > > ‘SoapySDRKwargs_fromString’ was here
>>>> > > > SOAPY_SDR_API SoapySDRKwargs
>>>> > SoapySDRKwargs_fromString(const
>>>> > > char *markup);
>>>> > > > ^
>>>> > > > In file included from
>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>>> > > > /usr/include/SoapySDR/Types.h:45:21: error:
>>>> conflicting
>>>> > types for
>>>> > > > ‘SoapySDRKwargs_toString’
>>>> > > > SOAPY_SDR_API char *SoapySDRKwargs_toString(const
>>>> > > SoapySDRKwargs *args);
>>>> > > > ^
>>>> > > > In file included from
>>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>>> > > > from
>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>>> > > > /usr/local/include/SoapySDR/Types.h:45:21: note:
>>>> previous
>>>> > > declaration of
>>>> > > > ‘SoapySDRKwargs_toString’ was here
>>>> > > > SOAPY_SDR_API char *SoapySDRKwargs_toString(const
>>>> > > SoapySDRKwargs *args);
>>>> > > > ^
>>>> > > > In file included from
>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>>> > > > /usr/include/SoapySDR/Types.h:50:5: error:
>>>> redeclaration of
>>>> > > enumerator
>>>> > > > ‘SOAPY_SDR_ARG_INFO_BOOL’
>>>> > > > SOAPY_SDR_ARG_INFO_BOOL,
>>>> > > > ^
>>>> > > > In file included from
>>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>>> > > > from
>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>>> > > > /usr/local/include/SoapySDR/Types.h:50:5: note:
>>>> previous
>>>> > > definition of
>>>> > > > ‘SOAPY_SDR_ARG_INFO_BOOL’ was here
>>>> > > > SOAPY_SDR_ARG_INFO_BOOL,
>>>> > > > ^
>>>> > > > In file included from
>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>>> > > > /usr/include/SoapySDR/Types.h:51:5: error:
>>>> redeclaration of
>>>> > > enumerator
>>>> > > > ‘SOAPY_SDR_ARG_INFO_INT’
>>>> > > > SOAPY_SDR_ARG_INFO_INT,
>>>> > > > ^
>>>> > > > In file included from
>>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>>> > > > from
>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>>> > > > /usr/local/include/SoapySDR/Types.h:51:5: note:
>>>> previous
>>>> > > definition of
>>>> > > > ‘SOAPY_SDR_ARG_INFO_INT’ was here
>>>> > > > SOAPY_SDR_ARG_INFO_INT,
>>>> > > > ^
>>>> > > > In file included from
>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>>> > > > /usr/include/SoapySDR/Types.h:52:5: error:
>>>> redeclaration of
>>>> > > enumerator
>>>> > > > ‘SOAPY_SDR_ARG_INFO_FLOAT’
>>>> > > > SOAPY_SDR_ARG_INFO_FLOAT,
>>>> > > > ^
>>>> > > > In file included from
>>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>>> > > > from
>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>>> > > > /usr/local/include/SoapySDR/Types.h:52:5: note:
>>>> previous
>>>> > > definition of
>>>> > > > ‘SOAPY_SDR_ARG_INFO_FLOAT’ was here
>>>> > > > SOAPY_SDR_ARG_INFO_FLOAT,
>>>> > > > ^
>>>> > > > In file included from
>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>>> > > > /usr/include/SoapySDR/Types.h:53:5: error:
>>>> redeclaration of
>>>> > > enumerator
>>>> > > > ‘SOAPY_SDR_ARG_INFO_STRING’
>>>> > > > SOAPY_SDR_ARG_INFO_STRING
>>>> > > > ^
>>>> > > > In file included from
>>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>>> > > > from
>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>>> > > > /usr/local/include/SoapySDR/Types.h:53:5: note:
>>>> previous
>>>> > > definition of
>>>> > > > ‘SOAPY_SDR_ARG_INFO_STRING’ was here
>>>> > > > SOAPY_SDR_ARG_INFO_STRING
>>>> > > > ^
>>>> > > > In file included from
>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>>> > > > /usr/include/SoapySDR/Types.h:54:3: error: conflicting
>>>> > types for
>>>> > > > ‘SoapySDRArgInfoType’
>>>> > > > } SoapySDRArgInfoType;
>>>> > > > ^
>>>> > > > In file included from
>>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>>> > > > from
>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>>> > > > /usr/local/include/SoapySDR/Types.h:54:3: note:
>>>> previous
>>>> > > declaration of
>>>> > > > ‘SoapySDRArgInfoType’ was here
>>>> > > > } SoapySDRArgInfoType;
>>>> > > > ^
>>>> > > > In file included from
>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>>> > > > /usr/include/SoapySDR/Types.h:103:3: error:
>>>> conflicting
>>>> > types for
>>>> > > > ‘SoapySDRArgInfo’
>>>> > > > } SoapySDRArgInfo;
>>>> > > > ^
>>>> > > > In file included from
>>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>>> > > > from
>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>>> > > > /usr/local/include/SoapySDR/Types.h:103:3: note:
>>>> previous
>>>> > > declaration of
>>>> > > > ‘SoapySDRArgInfo’ was here
>>>> > > > } SoapySDRArgInfo;
>>>> > > > ^
>>>> > > > In file included from
>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>>> > > > /usr/include/SoapySDR/Types.h:114:20: error:
>>>> conflicting
>>>> > types for
>>>> > > > ‘SoapySDRKwargs_set’
>>>> > > > SOAPY_SDR_API void SoapySDRKwargs_set(SoapySDRKwargs
>>>> *args,
>>>> > > const char
>>>> > > > *key, co
>>>> > > > ^
>>>> > > > In file included from
>>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>>> > > > from
>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>>> > > > /usr/local/include/SoapySDR/Types.h:120:19: note:
>>>> previous
>>>> > > declaration
>>>> > > > of ‘SoapySDRKwargs_set’ was here
>>>> > > > SOAPY_SDR_API int SoapySDRKwargs_set(SoapySDRKwargs
>>>> *args,
>>>> > > const char
>>>> > > > *key, con
>>>> > > > ^
>>>> > > > In file included from
>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>>> > > > /usr/include/SoapySDR/Types.h:120:27: error:
>>>> conflicting
>>>> > types for
>>>> > > > ‘SoapySDRKwargs_get’
>>>> > > > SOAPY_SDR_API const char
>>>> *SoapySDRKwargs_get(SoapySDRKwargs
>>>> > > *args,
>>>> > > > const char *
>>>> > > > ^
>>>> > > > In file included from
>>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>>> > > > from
>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>>> > > > /usr/local/include/SoapySDR/Types.h:126:27: note:
>>>> previous
>>>> > > declaration
>>>> > > > of ‘SoapySDRKwargs_get’ was here
>>>> > > > SOAPY_SDR_API const char *SoapySDRKwargs_get(const
>>>> > SoapySDRKwargs
>>>> > > > *args, const
>>>> > > > ^
>>>> > > > In file included from
>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>>> > > > /usr/include/SoapySDR/Types.h:126:20: error:
>>>> conflicting
>>>> > types for
>>>> > > > ‘SoapySDRKwargs_clear’
>>>> > > > SOAPY_SDR_API void
>>>> SoapySDRKwargs_clear(SoapySDRKwargs
>>>> > *args);
>>>> > > > ^
>>>> > > > In file included from
>>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>>> > > > from
>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>>> > > > /usr/local/include/SoapySDR/Types.h:132:20: note:
>>>> previous
>>>> > > declaration
>>>> > > > of ‘SoapySDRKwargs_clear’ was here
>>>> > > > SOAPY_SDR_API void
>>>> SoapySDRKwargs_clear(SoapySDRKwargs
>>>> > *args);
>>>> > > > ^
>>>> > > > In file included from
>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>>> > > > /usr/include/SoapySDR/Types.h:132:20: error:
>>>> conflicting
>>>> > types for
>>>> > > > ‘SoapySDRKwargsList_clear’
>>>> > > > SOAPY_SDR_API void
>>>> SoapySDRKwargsList_clear(SoapySDRKwargs
>>>> > > *args, const
>>>> > > > size_t
>>>> > > > ^
>>>> > > > In file included from
>>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>>> > > > from
>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>>> > > > /usr/local/include/SoapySDR/Types.h:138:20: note:
>>>> previous
>>>> > > declaration
>>>> > > > of ‘SoapySDRKwargsList_clear’ was here
>>>> > > > SOAPY_SDR_API void
>>>> SoapySDRKwargsList_clear(SoapySDRKwargs
>>>> > > *args, const
>>>> > > > size_t
>>>> > > > ^
>>>> > > > In file included from
>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>>> > > > /usr/include/SoapySDR/Types.h:138:20: error:
>>>> conflicting
>>>> > types for
>>>> > > > ‘SoapySDRArgInfo_clear’
>>>> > > > SOAPY_SDR_API void
>>>> > SoapySDRArgInfo_clear(SoapySDRArgInfo *info);
>>>> > > > ^
>>>> > > > In file included from
>>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>>> > > > from
>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>>> > > > /usr/local/include/SoapySDR/Types.h:144:20: note:
>>>> previous
>>>> > > declaration
>>>> > > > of ‘SoapySDRArgInfo_clear’ was here
>>>> > > > SOAPY_SDR_API void
>>>> > SoapySDRArgInfo_clear(SoapySDRArgInfo *info);
>>>> > > > ^
>>>> > > > In file included from
>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>>> > > > /usr/include/SoapySDR/Types.h:144:20: error:
>>>> conflicting
>>>> > types for
>>>> > > > ‘SoapySDRArgInfoList_clear’
>>>> > > > SOAPY_SDR_API void
>>>> > SoapySDRArgInfoList_clear(SoapySDRArgInfo
>>>> > > *info,
>>>> > > > const size_
>>>> > > > ^
>>>> > > > In file included from
>>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>>> > > > from
>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>>> > > > /usr/local/include/SoapySDR/Types.h:150:20: note:
>>>> previous
>>>> > > declaration
>>>> > > > of ‘SoapySDRArgInfoList_clear’ was here
>>>> > > > SOAPY_SDR_API void
>>>> > SoapySDRArgInfoList_clear(SoapySDRArgInfo
>>>> > > *info,
>>>> > > > const size_
>>>> > > > ^
>>>> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c: In
>>>> function
>>>> > > > ‘rf_soapy_open_multi’:
>>>> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:296:38:
>>>> > error:
>>>> > > > initialization from incompatible pointer type
>>>> > > > [-Werror=incompatible-pointer-types]
>>>> > > > const SoapySDRKwargs *soapy_args =
>>>> > > SoapySDRDevice_enumerate(NULL,
>>>> > > > &length);
>>>> > > > ^
>>>> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:316:45:
>>>> > error:
>>>> > > passing
>>>> > > > argument 1 of ‘SoapySDRDevice_make’ from incompatible
>>>> > pointer type
>>>> > > > [-Werror=incompatible-pointer-types]
>>>> > > > SoapySDRDevice *sdr =
>>>> > SoapySDRDevice_make(&(soapy_args[0]));
>>>> > > > ^
>>>> > > > In file included from
>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:0:
>>>> > > > /usr/local/include/SoapySDR/Device.h:78:31: note:
>>>> > expected ‘const
>>>> > > > SoapySDRKwargs * {aka const struct <anonymous> *}’ but
>>>> > > argument is of
>>>> > > > type ‘const SoapySDRKwargs * {aka const struct
>>>> > <anonymous> *}’
>>>> > > > SOAPY_SDR_API SoapySDRDevice
>>>> *SoapySDRDevice_make(const
>>>> > > SoapySDRKwargs
>>>> > > > *args);
>>>> > > > ^
>>>> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:380:28:
>>>> > error:
>>>> > > invalid
>>>> > > > initializer
>>>> > > > SoapySDRRange tx_range =
>>>> > > SoapySDRDevice_getGainRange(handler->device,
>>>> > > > SOAPY_S
>>>> > >�� > ^
>>>> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:381:28:
>>>> > error:
>>>> > > invalid
>>>> > > > initializer
>>>> > > > SoapySDRRange rx_range =
>>>> > > SoapySDRDevice_getGainRange(handler->device,
>>>> > > > SOAPY_S
>>>> > > > ^
>>>> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c: In
>>>> function
>>>> > > > ‘rf_soapy_set_rx_srate’:
>>>> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:581:29:
>>>> > error:
>>>> > > > initialization from incompatible pointer type
>>>> > > > [-Werror=incompatible-pointer-types]
>>>> > > > SoapySDRRange *bw_range =
>>>> > > > SoapySDRDevice_getBandwidthRange(handler->device, S
>>>> > > > ^
>>>> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c: In
>>>> function
>>>> > > > ‘rf_soapy_set_tx_srate’:
>>>> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:617:29:
>>>> > error:
>>>> > > > initialization from incompatible pointer type
>>>> > > > [-Werror=incompatible-pointer-types]
>>>> > > > SoapySDRRange *bw_range =
>>>> > > > SoapySDRDevice_getBandwidthRange(handler->device, S
>>>> > > > ^
>>>> > > > cc1: some warnings being treated as errors
>>>> > > >
>>>> lib/src/phy/rf/CMakeFiles/srslte_rf.dir/build.make:134:
>>>> > recipe for
>>>> > > > target
>>>> > >
>>>> 'lib/src/phy/rf/CMakeFiles/srslte_rf.dir/rf_soapy_imp.c.o'
>>>> > failed
>>>> > > > make[2]: ***
>>>> > >
>>>> [lib/src/phy/rf/CMakeFiles/srslte_rf.dir/rf_soapy_imp.c.o]
>>>> > > > Error 1
>>>> > > > CMakeFiles/Makefile2:2905: recipe for target
>>>> > > > 'lib/src/phy/rf/CMakeFiles/srslte_rf.dir/all' failed
>>>> > > > make[1]: ***
>>>> > [lib/src/phy/rf/CMakeFiles/srslte_rf.dir/all] Error 2
>>>> > > > Makefile:160: recipe for target 'all' failed
>>>> > > > make: *** [all] Error 2
>>>> > > >
>>>> > > >
>>>> > > > Please advise! Thanks
>>>> > > > --
>>>> > > > Best Regards,
>>>> > > > DUO
>>>> > > >
>>>> > > >
>>>> > > > _______________________________________________
>>>> > > > srslte-users mailing list
>>>> > > > srslte-users at lists.softwareradiosystems.com
>>>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>>>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>>>> > <mailto:srslte-users at lists.softwareradiosystems.com>>
>>>> > > >
>>>> > http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
>>>> > > >
>>>> > >
>>>> > >
>>>> > >
>>>> > > --
>>>> > > Best Regards,
>>>> > > Sandi
>>>> > >
>>>> > >
>>>> > >
>>>> > > --
>>>> > > Best Regards,
>>>> > > Sandi
>>>> > >
>>>> >
>>>> >
>>>> > --
>>>> > Andre Puschmann
>>>> >
>>>> > Software Radio Systems (SRS)
>>>> > http://www.softwareradiosystems.com
>>>> >
>>>> > PGP/GnuPG key: 6C42AB31
>>>> > fingerprint: 137A AE49 785B A445 257C 8AD7 D877 A498 6C42 AB31
>>>> >
>>>> >
>>>> >
>>>> > --
>>>> > Best Regards,
>>>> > Sandi
>>>> >
>>>>
>>>>
>>>> --
>>>> Andre Puschmann
>>>>
>>>> Software Radio Systems (SRS)
>>>> http://www.softwareradiosystems.com
>>>>
>>>> PGP/GnuPG key: 6C42AB31
>>>> fingerprint: 137A AE49 785B A445 257C 8AD7 D877 A498 6C42 AB31
>>>>
>>>
>>>
>>> --
>>> Best Regards,
>>> Sandi
>>>
>>>
>>
>> --
>> Best Regards,
>> Sandi
>>
>>
>> _______________________________________________
>> srslte-users mailing listsrslte-users at lists.softwareradiosystems.comhttp://www.softwareradiosystems.com/mailman/listinfo/srslte-users
>>
>> _______________________________________________
>> srslte-users mailing list
>> srslte-users at lists.softwareradiosystems.com
>> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
>>
>
--
Best Regards,
Sandi
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20181107/2df9b065/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: srsLTE error when turn on data.pcapng.tar.gz
Type: application/gzip
Size: 21450 bytes
Desc: not available
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20181107/2df9b065/attachment.gz>
More information about the srsran-users
mailing list