[srslte-users] Need help build error when make on srsLTE with LimeSDR
ALEJANDRO BLANCO PIZARRO
100283180 at alumnos.uc3m.es
Wed Nov 7 16:35:56 UTC 2018
Have you tried to decrement the bandwidth? It could be that with your
bandwidth, you have bottleneck. Try 5 MHz.
Best,
Alejandro
El mié., 7 nov. 2018 16:53, Sandi Suhendro <djks74 at gmail.com> escribió:
> Dear Ignas, Andre,
> the phone is attached but it produce an error when turn on the cellular
> data on my phone: (VIVO XShot)
>
> here is the log : (pcap attached)
>
> ==== eNodeB started ===
> Type <t> to view trace
> [INFO] Tx calibration finished
> [INFO] Rx calibration finished
> [WARNING] L
> [WARNING] L
> RACH: tti=10221, preamble=23, offset=1, temp_crnti=0x46
> RACH: tti=1, preamble=23, offset=1, temp_crnti=0x47
> Disconnecting rnti=0x46.
> Disconnecting rnti=0x47.
> RACH: tti=381, preamble=44, offset=1, temp_crnti=0x48
> Disconnecting rnti=0x48.
> RACH: tti=2891, preamble=22, offset=1, temp_crnti=0x49
> Unhandled feature in RRC function:
> liblte_rrc_unpack_rrc_connection_setup_complete_msg
>
> Disconnecting rnti=0x49.
> RACH: tti=4671, preamble=9, offset=1, temp_crnti=0x4a
> Unhandled feature in RRC function:
> liblte_rrc_unpack_rrc_connection_setup_complete_msg
>
> User 0x4a connected
> Bus error
> >>>>>>>>>>>>>>>>.
>
> hope you can give me advise what is wrong? Thanks in advance.
>
> regards,
> DUO / Sandi
>
>
>
> On Tue, Nov 6, 2018 at 8:43 PM Sandi Suhendro <djks74 at gmail.com> wrote:
>
>> Dear Ignas,
>> Thanks to let me know to update. Now it works and i saw my 4g network
>> now. :)
>>
>> Just strange not all phone see the network. Will try to attach now. :)
>>
>> Thanks and warm regards,
>> Sandi
>>
>> On Tue, Nov 6, 2018, 19:56 Ignas Jarusevicius <
>> i.jarusevicius at limemicro.com wrote:
>>
>>> Hi Sandri,
>>>
>>> I have noticed that you are using old libLimeSuite version as recent
>>> versions show 'module=FX3' for LimeSDR-USB. So try updating LimeSuite.
>>> Also, I was I able to get srsenb working with LimeSDR boards few months
>>> ago. I have attached one of my enb.conf that used to work (not sure if it
>>> still works with current srsLTE version).
>>>
>>> -Ignas
>>> On 2018-11-05 16:02, Sandi Suhendro wrote:
>>>
>>> Hi Andre,
>>> ok finally working to Lime direct via Soapy, just edit the makelist text
>>> and remove the UHD.
>>>
>>> here I got more error, what should I do?
>>>
>>> <<<<<<<<<<
>>> --- Software Radio Systems LTE eNodeB ---
>>>
>>> Reading configuration file /home/duo/.srs/enb.conf...
>>> Soapy has found device #0: addr=1d50:6108, driver=lime,
>>> label=LimeSDR-USB [USB 3.0] 9061C02C73125, media=USB 3.0, module=STREAM,
>>> name=LimeSDR-USB, serial=0009061C02C73125,
>>> [INFO] Make connection: 'LimeSDR-USB [USB 3.0] 9061C02C73125'
>>> [INFO] Device name: LimeSDR-USB
>>> [INFO] Reference: 30.72 MHz
>>> [INFO] Init LMS7002M(0)
>>> [INFO] Ver=7, Rev=1, Mask=1
>>> [INFO] LMS7002M calibration values caching Enable
>>> Set Rx bandwidth to 2.50 MHz
>>> [ERROR] setBandwidth(Tx, 0, 1.44 MHz) Failed - Tx lpf(1.44 MHz) out of
>>> range 5-40 MHz and 50-130 MHz
>>> setBandwidth fail: Tx lpf(1.44 MHz) out of range 5-40 MHz and 50-130 MHz
>>> Setting up RX stream
>>> Setting up TX stream
>>> Available device sensors:
>>> - clock_locked
>>> - lms7_temp
>>> Available sensors for RX channel 0:
>>> - lo_locked
>>> State of gain elements for Rx channel 0 (AGC not supported):
>>> - LNA: 30.00 dB
>>> - TIA: 0.00 dB
>>> - PGA: 5.00 dB
>>> State of gain elements for Tx channel 0 (AGC not supported):
>>> - LNA: nan dB
>>> - TIA: nan dB
>>> - PGA: nan dB
>>> Rx antenna set to LNAL
>>> Tx antenna set to BAND1
>>>
>>> Warning burst preamble is not calibrated for device lime. Set a value
>>> manually
>>>
>>> Setting frequency: DL=1845.0 Mhz, UL=1750.0 MHz
>>> Tuned Tx to 1845.00 MHz
>>> Tuned Rx to 1750.00 MHz
>>> Set master clock rate to 11.52 MHz
>>> Setting Sampling frequency 11.52 MHz
>>> setSampleRate Rx fail: SoapyLMS7::setSampleRate() -- rate too high
>>> setSampleRate Tx fail: SoapyLMS7::setSampleRate() -- rate too high
>>>
>>> Warning TX/RX time offset for sampling rate -1 KHz not calibrated. Using
>>> interpolated value
>>>
>>>
>>> ==== eNodeB started ===
>>> Type <t> to view trace
>>>
>>> >>>>>>>>>>>>>>
>>>
>>> Please advise! Thanks. :-)
>>>
>>> regards,
>>> Sandi / DUO
>>>
>>>
>>> On Mon, Nov 5, 2018 at 8:07 PM Sandi Suhendro <djks74 at gmail.com> wrote:
>>>
>>>> I did try remove the soapyUHD and delete the libuhd and libuhdsupport
>>>> from usr/local/lib, but when re install the srs-LTE, it gives me error it
>>>> need UHD.
>>>> do you know it may cause I miss it how to build srsLTE direct to
>>>> soapySDR?
>>>>
>>>> anyway, it has output signal on earfcn 1600, but dont see the network
>>>> with UHD.
>>>>
>>>> maybe better using soapySDR instead UHD, but the installation asking
>>>> UHD.
>>>>
>>>> please advise.
>>>>
>>>> regards,
>>>> Sandi
>>>>
>>>> On Mon, Nov 5, 2018 at 3:11 AM Andre Puschmann <
>>>> andre.puschmann at softwareradiosystems.com> wrote:
>>>>
>>>>> Hey,
>>>>>
>>>>> seems like you are trying to run the Lime through UHD, i.e. using the
>>>>> uhd-soapy wrapper. I am not sure if it is working well but maybe it
>>>>> does. Does it output a signal?
>>>>>
>>>>> We do have a Soapy driver which also works with the Lime so maybe try
>>>>> using that instead. Probably the easiest is to uninstall the uhd-soapy
>>>>> wrapper. The problem here is that the srsLTE's RF driver library stops
>>>>> looking for other devices as soon as a supported device is found and
>>>>> the
>>>>> UHD driver is the first to query.
>>>>>
>>>>>
>>>>> Hope that helps.
>>>>>
>>>>> Cheers
>>>>> Andre
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On 4/11/18 15:07, Sandi Suhendro wrote:
>>>>> > Dear Andre,
>>>>> > Do you know what I miss?
>>>>> > I have this following error :
>>>>> > <<<<<<<<<
>>>>> > sudo srsenb
>>>>> > linux; GNU C++ version 5.4.0 20160609; Boost_105800;
>>>>> > UHD_003.010.002.HEAD-0-gbd6e21dc
>>>>> >
>>>>> >
>>>>> > Built in Release mode using commit 1c015aab on branch master.
>>>>> >
>>>>> > --- Software Radio Systems LTE eNodeB ---
>>>>> >
>>>>> > Reading configuration file /home/duo/.srs/enb.conf...
>>>>> > Opening USRP with args:
>>>>> > -- Make connection: 'LimeSDR-USB [USB 3.0] 9061C02C73125'
>>>>> > -- Device name: LimeSDR-USB
>>>>> > -- Reference: 30.72 MHz
>>>>> > -- Init LMS7002M(0)
>>>>> > -- Ver=7, Rev=1, Mask=1
>>>>> > -- LMS7002M calibration values caching Enable
>>>>> > Setting frequency: DL=1845.0 Mhz, UL=1750.0 MHz
>>>>> > Setting Sampling frequency 11.52 MHz
>>>>> >
>>>>> > Warning TX/RX time offset has not been calibrated for device
>>>>> > uhd_unknown. Set a value manually
>>>>> >
>>>>> >
>>>>> > ==== eNodeB started ===
>>>>> > Type <t> to view trace
>>>>> > Error timed out while receiving samples from UHD.
>>>>> > Error timed out while receiving samples from UHD.
>>>>> > Error timed out while receiving samples from UHD.
>>>>> >>>>>>>>>>>>
>>>>> >
>>>>> > And in the log of nextepc is :
>>>>> > [11/04 20:48:59.179] eNB-S1 accepted[127.0.1.1]:55722 in s1_path
>>>>> module
>>>>> > [11/04 20:48:59.180] eNB-S1 accepted[127.0.1.1] in master_sm module
>>>>> >
>>>>> >
>>>>> > Please advise! Thanks in advance. :-)
>>>>> >
>>>>> > regards,
>>>>> > Sandi / DUO
>>>>> >
>>>>> >
>>>>> > On Fri, Nov 2, 2018 at 3:51 PM Andre Puschmann
>>>>> > <andre.puschmann at softwareradiosystems.com
>>>>> > <mailto:andre.puschmann at softwareradiosystems.com>> wrote:
>>>>> >
>>>>> > Sandi,
>>>>> >
>>>>> > glad to hear you got it working. Let us know how it goes.
>>>>> >
>>>>> > Cheers
>>>>> > Andre
>>>>> >
>>>>> > On 2/11/18 8:54, Sandi Suhendro wrote:
>>>>> > > Dear Andre,
>>>>> > > sorry for this simple matter. try to remove all and re install
>>>>> and it
>>>>> > > works now. Thanks.
>>>>> > >
>>>>> > > regards,
>>>>> > > Sandi / DUO
>>>>> > >
>>>>> > > On Thu, Nov 1, 2018 at 10:33 PM Sandi Suhendro <
>>>>> djks74 at gmail.com
>>>>> > <mailto:djks74 at gmail.com>
>>>>> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>> wrote:
>>>>> > >
>>>>> > > Dear Andre,
>>>>> > > Thanks for response.
>>>>> > >
>>>>> > > Im using ubuntu 16.04 and build soapySDR from git.
>>>>> > > as I remember Im using ppa at first but I also install
>>>>> again
>>>>> > from git.
>>>>> > > what should I do? remove all soapy from apt and make
>>>>> uninstall
>>>>> > from
>>>>> > > git too then re install?
>>>>> > >
>>>>> > > please advise.
>>>>> > >
>>>>> > > regards,
>>>>> > > Sandi / DUO
>>>>> > >
>>>>> > > On Thu, Nov 1, 2018 at 9:33 PM Andre Puschmann
>>>>> > > <andre.puschmann at softwareradiosystems.com
>>>>> > <mailto:andre.puschmann at softwareradiosystems.com>
>>>>> > > <mailto:andre.puschmann at softwareradiosystems.com
>>>>> > <mailto:andre.puschmann at softwareradiosystems.com>>> wrote:
>>>>> > >
>>>>> > > Likely to be a mismatch of headers. What system are
>>>>> you on and
>>>>> > > where do
>>>>> > > you get the soapy dev package from? git, ppa?
>>>>> > >
>>>>> > >
>>>>> > > On 31/10/18 12:43, Sandi Suhendro wrote:
>>>>> > > > Dear list,
>>>>> > > > hope someone can give me advise what is wrong?
>>>>> > > > Im runing fine with osmocom or openbts-umts. (2g/3g)
>>>>> > > > but....
>>>>> > > > Im facing SoapySDR range error when build srsLTE :
>>>>> > > >
>>>>> > > > [ 40%] Linking C executable pdsch_test
>>>>> > > > [ 40%] Built target pdsch_test
>>>>> > > > [ 40%] Building C object
>>>>> > > >
>>>>> lib/src/phy/rf/CMakeFiles/srslte_rf_utils.dir/rf_utils.c.o
>>>>> > > > [ 40%] Linking C static library libsrslte_rf_utils.a
>>>>> > > > [ 40%] Built target srslte_rf_utils
>>>>> > > > [ 41%] Building C object
>>>>> > > lib/src/phy/rf/CMakeFiles/srslte_rf.dir/rf_imp.c.o
>>>>> > > > [ 41%] Building C object
>>>>> > > >
>>>>> lib/src/phy/rf/CMakeFiles/srslte_rf.dir/rf_uhd_imp.c.o
>>>>> > > > [ 41%] Building CXX object
>>>>> > > >
>>>>> lib/src/phy/rf/CMakeFiles/srslte_rf.dir/uhd_c_api.cpp.o
>>>>> > > > [ 41%] Building C object
>>>>> > > >
>>>>> lib/src/phy/rf/CMakeFiles/srslte_rf.dir/rf_soapy_imp.c.o
>>>>> > > > In file included from
>>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>>>> > > > /usr/include/SoapySDR/Types.h:25:3: error:
>>>>> conflicting
>>>>> > types for
>>>>> > > > ‘SoapySDRRange’
>>>>> > > > } SoapySDRRange;
>>>>> > > > ^
>>>>> > > > In file included from
>>>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>>>> > > > from
>>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>>>> > > > /usr/local/include/SoapySDR/Types.h:25:3: note:
>>>>> previous
>>>>> > > declaration of
>>>>> > > > ‘SoapySDRRange’ was here
>>>>> > > > } SoapySDRRange;
>>>>> > > > ^
>>>>> > > > In file included from
>>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>>>> > > > /usr/include/SoapySDR/Types.h:33:3: error:
>>>>> conflicting
>>>>> > types for
>>>>> > > > ‘SoapySDRKwargs’
>>>>> > > > } SoapySDRKwargs;
>>>>> > > > ^
>>>>> > > > In file included from
>>>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>>>> > > > from
>>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>>>> > > > /usr/local/include/SoapySDR/Types.h:33:3: note:
>>>>> previous
>>>>> > > declaration of
>>>>> > > > ‘SoapySDRKwargs’ was here
>>>>> > > > } SoapySDRKwargs;
>>>>> > > > ^
>>>>> > > > In file included from
>>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>>>> > > > /usr/include/SoapySDR/Types.h:39:30: error:
>>>>> conflicting
>>>>> > types for
>>>>> > > > ‘SoapySDRKwargs_fromString’
>>>>> > > > SOAPY_SDR_API SoapySDRKwargs
>>>>> > SoapySDRKwargs_fromString(const
>>>>> > > char *markup);
>>>>> > > > ^
>>>>> > > > In file included from
>>>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>>>> > > > from
>>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>>>> > > > /usr/local/include/SoapySDR/Types.h:39:30: note:
>>>>> previous
>>>>> > > declaration of
>>>>> > > > ‘SoapySDRKwargs_fromString’ was here
>>>>> > > > SOAPY_SDR_API SoapySDRKwargs
>>>>> > SoapySDRKwargs_fromString(const
>>>>> > > char *markup);
>>>>> > > > ^
>>>>> > > > In file included from
>>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>>>> > > > /usr/include/SoapySDR/Types.h:45:21: error:
>>>>> conflicting
>>>>> > types for
>>>>> > > > ‘SoapySDRKwargs_toString’
>>>>> > > > SOAPY_SDR_API char *SoapySDRKwargs_toString(const
>>>>> > > SoapySDRKwargs *args);
>>>>> > > > ^
>>>>> > > > In file included from
>>>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>>>> > > > from
>>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>>>> > > > /usr/local/include/SoapySDR/Types.h:45:21: note:
>>>>> previous
>>>>> > > declaration of
>>>>> > > > ‘SoapySDRKwargs_toString’ was here
>>>>> > > > SOAPY_SDR_API char *SoapySDRKwargs_toString(const
>>>>> > > SoapySDRKwargs *args);
>>>>> > > > ^
>>>>> > > > In file included from
>>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>>>> > > > /usr/include/SoapySDR/Types.h:50:5: error:
>>>>> redeclaration of
>>>>> > > enumerator
>>>>> > > > ‘SOAPY_SDR_ARG_INFO_BOOL’
>>>>> > > > SOAPY_SDR_ARG_INFO_BOOL,
>>>>> > > > ^
>>>>> > > > In file included from
>>>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>>>> > > > from
>>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>>>> > > > /usr/local/include/SoapySDR/Types.h:50:5: note:
>>>>> previous
>>>>> > > definition of
>>>>> > > > ‘SOAPY_SDR_ARG_INFO_BOOL’ was here
>>>>> > > > SOAPY_SDR_ARG_INFO_BOOL,
>>>>> > > > ^
>>>>> > > > In file included from
>>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>>>> > > > /usr/include/SoapySDR/Types.h:51:5: error:
>>>>> redeclaration of
>>>>> > > enumerator
>>>>> > > > ‘SOAPY_SDR_ARG_INFO_INT’
>>>>> > > > SOAPY_SDR_ARG_INFO_INT,
>>>>> > > > ^
>>>>> > > > In file included from
>>>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>>>> > > > from
>>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>>>> > > > /usr/local/include/SoapySDR/Types.h:51:5: note:
>>>>> previous
>>>>> > > definition of
>>>>> > > > ‘SOAPY_SDR_ARG_INFO_INT’ was here
>>>>> > > > SOAPY_SDR_ARG_INFO_INT,
>>>>> > > > ^
>>>>> > > > In file included from
>>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>>>> > > > /usr/include/SoapySDR/Types.h:52:5: error:
>>>>> redeclaration of
>>>>> > > enumerator
>>>>> > > > ‘SOAPY_SDR_ARG_INFO_FLOAT’
>>>>> > > > SOAPY_SDR_ARG_INFO_FLOAT,
>>>>> > > > ^
>>>>> > > > In file included from
>>>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>>>> > > > from
>>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>>>> > > > /usr/local/include/SoapySDR/Types.h:52:5: note:
>>>>> previous
>>>>> > > definition of
>>>>> > > > ‘SOAPY_SDR_ARG_INFO_FLOAT’ was here
>>>>> > > > SOAPY_SDR_ARG_INFO_FLOAT,
>>>>> > > > ^
>>>>> > > > In file included from
>>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>>>> > > > /usr/include/SoapySDR/Types.h:53:5: error:
>>>>> redeclaration of
>>>>> > > enumerator
>>>>> > > > ‘SOAPY_SDR_ARG_INFO_STRING’
>>>>> > > > SOAPY_SDR_ARG_INFO_STRING
>>>>> > > > ^
>>>>> > > > In file included from
>>>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>>>> > > > from
>>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>>>> > > > /usr/local/include/SoapySDR/Types.h:53:5: note:
>>>>> previous
>>>>> > > definition of
>>>>> > > > ‘SOAPY_SDR_ARG_INFO_STRING’ was here
>>>>> > > > SOAPY_SDR_ARG_INFO_STRING
>>>>> > > > ^
>>>>> > > > In file included from
>>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>>>> > > > /usr/include/SoapySDR/Types.h:54:3: error:
>>>>> conflicting
>>>>> > types for
>>>>> > > > ‘SoapySDRArgInfoType’
>>>>> > > > } SoapySDRArgInfoType;
>>>>> > > > ^
>>>>> > > > In file included from
>>>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>>>> > > > from
>>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>>>> > > > /usr/local/include/SoapySDR/Types.h:54:3: note:
>>>>> previous
>>>>> > > declaration of
>>>>> > > > ‘SoapySDRArgInfoType’ was here
>>>>> > > > } SoapySDRArgInfoType;
>>>>> > > > ^
>>>>> > > > In file included from
>>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>>>> > > > /usr/include/SoapySDR/Types.h:103:3: error:
>>>>> conflicting
>>>>> > types for
>>>>> > > > ‘SoapySDRArgInfo’
>>>>> > > > } SoapySDRArgInfo;
>>>>> > > > ^
>>>>> > > > In file included from
>>>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>>>> > > > from
>>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>>>> > > > /usr/local/include/SoapySDR/Types.h:103:3: note:
>>>>> previous
>>>>> > > declaration of
>>>>> > > > ‘SoapySDRArgInfo’ was here
>>>>> > > > } SoapySDRArgInfo;
>>>>> > > > ^
>>>>> > > > In file included from
>>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>>>> > > > /usr/include/SoapySDR/Types.h:114:20: error:
>>>>> conflicting
>>>>> > types for
>>>>> > > > ‘SoapySDRKwargs_set’
>>>>> > > > SOAPY_SDR_API void
>>>>> SoapySDRKwargs_set(SoapySDRKwargs *args,
>>>>> > > const char
>>>>> > > > *key, co
>>>>> > > > ^
>>>>> > > > In file included from
>>>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>>>> > > > from
>>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>>>> > > > /usr/local/include/SoapySDR/Types.h:120:19: note:
>>>>> previous
>>>>> > > declaration
>>>>> > > > of ‘SoapySDRKwargs_set’ was here
>>>>> > > > SOAPY_SDR_API int SoapySDRKwargs_set(SoapySDRKwargs
>>>>> *args,
>>>>> > > const char
>>>>> > > > *key, con
>>>>> > > > ^
>>>>> > > > In file included from
>>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>>>> > > > /usr/include/SoapySDR/Types.h:120:27: error:
>>>>> conflicting
>>>>> > types for
>>>>> > > > ‘SoapySDRKwargs_get’
>>>>> > > > SOAPY_SDR_API const char
>>>>> *SoapySDRKwargs_get(SoapySDRKwargs
>>>>> > > *args,
>>>>> > > > const char *
>>>>> > > > ^
>>>>> > > > In file included from
>>>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>>>> > > > from
>>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>>>> > > > /usr/local/include/SoapySDR/Types.h:126:27: note:
>>>>> previous
>>>>> > > declaration
>>>>> > > > of ‘SoapySDRKwargs_get’ was here
>>>>> > > > SOAPY_SDR_API const char *SoapySDRKwargs_get(const
>>>>> > SoapySDRKwargs
>>>>> > > > *args, const
>>>>> > > > ^
>>>>> > > > In file included from
>>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>>>> > > > /usr/include/SoapySDR/Types.h:126:20: error:
>>>>> conflicting
>>>>> > types for
>>>>> > > > ‘SoapySDRKwargs_clear’
>>>>> > > > SOAPY_SDR_API void
>>>>> SoapySDRKwargs_clear(SoapySDRKwargs
>>>>> > *args);
>>>>> > > > ^
>>>>> > > > In file included from
>>>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>>>> > > > from
>>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>>>> > > > /usr/local/include/SoapySDR/Types.h:132:20: note:
>>>>> previous
>>>>> > > declaration
>>>>> > > > of ‘SoapySDRKwargs_clear’ was here
>>>>> > > > SOAPY_SDR_API void
>>>>> SoapySDRKwargs_clear(SoapySDRKwargs
>>>>> > *args);
>>>>> > > > ^
>>>>> > > > In file included from
>>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>>>> > > > /usr/include/SoapySDR/Types.h:132:20: error:
>>>>> conflicting
>>>>> > types for
>>>>> > > > ‘SoapySDRKwargsList_clear’
>>>>> > > > SOAPY_SDR_API void
>>>>> SoapySDRKwargsList_clear(SoapySDRKwargs
>>>>> > > *args, const
>>>>> > > > size_t
>>>>> > > > ^
>>>>> > > > In file included from
>>>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>>>> > > > from
>>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>>>> > > > /usr/local/include/SoapySDR/Types.h:138:20: note:
>>>>> previous
>>>>> > > declaration
>>>>> > > > of ‘SoapySDRKwargsList_clear’ was here
>>>>> > > > SOAPY_SDR_API void
>>>>> SoapySDRKwargsList_clear(SoapySDRKwargs
>>>>> > > *args, const
>>>>> > > > size_t
>>>>> > > > ^
>>>>> > > > In file included from
>>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>>>> > > > /usr/include/SoapySDR/Types.h:138:20: error:
>>>>> conflicting
>>>>> > types for
>>>>> > > > ‘SoapySDRArgInfo_clear’
>>>>> > > > SOAPY_SDR_API void
>>>>> > SoapySDRArgInfo_clear(SoapySDRArgInfo *info);
>>>>> > > > ^
>>>>> > > > In file included from
>>>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>>>> > > > from
>>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>>>> > > > /usr/local/include/SoapySDR/Types.h:144:20: note:
>>>>> previous
>>>>> > > declaration
>>>>> > > > of ‘SoapySDRArgInfo_clear’ was here
>>>>> > > > SOAPY_SDR_API void
>>>>> > SoapySDRArgInfo_clear(SoapySDRArgInfo *info);
>>>>> > > > ^
>>>>> > > > In file included from
>>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>>>>> > > > /usr/include/SoapySDR/Types.h:144:20: error:
>>>>> conflicting
>>>>> > types for
>>>>> > > > ‘SoapySDRArgInfoList_clear’
>>>>> > > > SOAPY_SDR_API void
>>>>> > SoapySDRArgInfoList_clear(SoapySDRArgInfo
>>>>> > > *info,
>>>>> > > > const size_
>>>>> > > > ^
>>>>> > > > In file included from
>>>>> > /usr/local/include/SoapySDR/Device.h:18:0,
>>>>> > > > from
>>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>>>>> > > > /usr/local/include/SoapySDR/Types.h:150:20: note:
>>>>> previous
>>>>> > > declaration
>>>>> > > > of ‘SoapySDRArgInfoList_clear’ was here
>>>>> > > > SOAPY_SDR_API void
>>>>> > SoapySDRArgInfoList_clear(SoapySDRArgInfo
>>>>> > > *info,
>>>>> > > > const size_
>>>>> > > > ^
>>>>> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c: In
>>>>> function
>>>>> > > > ‘rf_soapy_open_multi’:
>>>>> > > >
>>>>> /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:296:38:
>>>>> > error:
>>>>> > > > initialization from incompatible pointer type
>>>>> > > > [-Werror=incompatible-pointer-types]
>>>>> > > > const SoapySDRKwargs *soapy_args =
>>>>> > > SoapySDRDevice_enumerate(NULL,
>>>>> > > > &length);
>>>>> > > > ^
>>>>> > > >
>>>>> /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:316:45:
>>>>> > error:
>>>>> > > passing
>>>>> > > > argument 1 of ‘SoapySDRDevice_make’ from incompatible
>>>>> > pointer type
>>>>> > > > [-Werror=incompatible-pointer-types]
>>>>> > > > SoapySDRDevice *sdr =
>>>>> > SoapySDRDevice_make(&(soapy_args[0]));
>>>>> > > > ^
>>>>> > > > In file included from
>>>>> > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:0:
>>>>> > > > /usr/local/include/SoapySDR/Device.h:78:31: note:
>>>>> > expected ‘const
>>>>> > > > SoapySDRKwargs * {aka const struct <anonymous> *}’
>>>>> but
>>>>> > > argument is of
>>>>> > > > type ‘const SoapySDRKwargs * {aka const struct
>>>>> > <anonymous> *}’
>>>>> > > > SOAPY_SDR_API SoapySDRDevice
>>>>> *SoapySDRDevice_make(const
>>>>> > > SoapySDRKwargs
>>>>> > > > *args);
>>>>> > > > ^
>>>>> > > >
>>>>> /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:380:28:
>>>>> > error:
>>>>> > > invalid
>>>>> > > > initializer
>>>>> > > > SoapySDRRange tx_range =
>>>>> > > SoapySDRDevice_getGainRange(handler->device,
>>>>> > > > SOAPY_S
>>>>> > >�� > ^
>>>>> > > >
>>>>> /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:381:28:
>>>>> > error:
>>>>> > > invalid
>>>>> > > > initializer
>>>>> > > > SoapySDRRange rx_range =
>>>>> > > SoapySDRDevice_getGainRange(handler->device,
>>>>> > > > SOAPY_S
>>>>> > > > ^
>>>>> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c: In
>>>>> function
>>>>> > > > ‘rf_soapy_set_rx_srate’:
>>>>> > > >
>>>>> /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:581:29:
>>>>> > error:
>>>>> > > > initialization from incompatible pointer type
>>>>> > > > [-Werror=incompatible-pointer-types]
>>>>> > > > SoapySDRRange *bw_range =
>>>>> > > > SoapySDRDevice_getBandwidthRange(handler->device, S
>>>>> > > > ^
>>>>> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c: In
>>>>> function
>>>>> > > > ‘rf_soapy_set_tx_srate’:
>>>>> > > >
>>>>> /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:617:29:
>>>>> > error:
>>>>> > > > initialization from incompatible pointer type
>>>>> > > > [-Werror=incompatible-pointer-types]
>>>>> > > > SoapySDRRange *bw_range =
>>>>> > > > SoapySDRDevice_getBandwidthRange(handler->device, S
>>>>> > > > ^
>>>>> > > > cc1: some warnings being treated as errors
>>>>> > > >
>>>>> lib/src/phy/rf/CMakeFiles/srslte_rf.dir/build.make:134:
>>>>> > recipe for
>>>>> > > > target
>>>>> > >
>>>>> 'lib/src/phy/rf/CMakeFiles/srslte_rf.dir/rf_soapy_imp.c.o'
>>>>> > failed
>>>>> > > > make[2]: ***
>>>>> > >
>>>>> [lib/src/phy/rf/CMakeFiles/srslte_rf.dir/rf_soapy_imp.c.o]
>>>>> > > > Error 1
>>>>> > > > CMakeFiles/Makefile2:2905: recipe for target
>>>>> > > > 'lib/src/phy/rf/CMakeFiles/srslte_rf.dir/all' failed
>>>>> > > > make[1]: ***
>>>>> > [lib/src/phy/rf/CMakeFiles/srslte_rf.dir/all] Error 2
>>>>> > > > Makefile:160: recipe for target 'all' failed
>>>>> > > > make: *** [all] Error 2
>>>>> > > >
>>>>> > > >
>>>>> > > > Please advise! Thanks
>>>>> > > > --
>>>>> > > > Best Regards,
>>>>> > > > DUO
>>>>> > > >
>>>>> > > >
>>>>> > > > _______________________________________________
>>>>> > > > srslte-users mailing list
>>>>> > > > srslte-users at lists.softwareradiosystems.com
>>>>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>>>>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>>>>> > <mailto:srslte-users at lists.softwareradiosystems.com>>
>>>>> > > >
>>>>> >
>>>>> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
>>>>> > > >
>>>>> > >
>>>>> > >
>>>>> > >
>>>>> > > --
>>>>> > > Best Regards,
>>>>> > > Sandi
>>>>> > >
>>>>> > >
>>>>> > >
>>>>> > > --
>>>>> > > Best Regards,
>>>>> > > Sandi
>>>>> > >
>>>>> >
>>>>> >
>>>>> > --
>>>>> > Andre Puschmann
>>>>> >
>>>>> > Software Radio Systems (SRS)
>>>>> > http://www.softwareradiosystems.com
>>>>> >
>>>>> > PGP/GnuPG key: 6C42AB31
>>>>> > fingerprint: 137A AE49 785B A445 257C 8AD7 D877 A498 6C42 AB31
>>>>> >
>>>>> >
>>>>> >
>>>>> > --
>>>>> > Best Regards,
>>>>> > Sandi
>>>>> >
>>>>>
>>>>>
>>>>> --
>>>>> Andre Puschmann
>>>>>
>>>>> Software Radio Systems (SRS)
>>>>> http://www.softwareradiosystems.com
>>>>>
>>>>> PGP/GnuPG key: 6C42AB31
>>>>> fingerprint: 137A AE49 785B A445 257C 8AD7 D877 A498 6C42 AB31
>>>>>
>>>>
>>>>
>>>> --
>>>> Best Regards,
>>>> Sandi
>>>>
>>>>
>>>
>>> --
>>> Best Regards,
>>> Sandi
>>>
>>>
>>> _______________________________________________
>>> srslte-users mailing listsrslte-users at lists.softwareradiosystems.comhttp://www.softwareradiosystems.com/mailman/listinfo/srslte-users
>>>
>>> _______________________________________________
>>> srslte-users mailing list
>>> srslte-users at lists.softwareradiosystems.com
>>> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
>>>
>>
>
> --
> Best Regards,
> Sandi
>
> _______________________________________________
> srslte-users mailing list
> srslte-users at lists.softwareradiosystems.com
> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20181107/a3e44ecb/attachment.htm>
More information about the srsran-users
mailing list