[srslte-users] Need help build error when make on srsLTE with LimeSDR
Sandi Suhendro
djks74 at gmail.com
Fri Nov 9 16:47:34 UTC 2018
here it is :
(gdb) bt
#0 0x00000000004b7c7e in
srsenb::rrc::ue::send_connection_reconf_new_bearer(LIBLTE_S1AP_E_RABTOBESETUPLISTBEARERSUREQ_STRUCT*)
()
#1 0x00000000004b8096 in
srsenb::rrc::ue::setup_erabs(LIBLTE_S1AP_E_RABTOBESETUPLISTBEARERSUREQ_STRUCT*)
()
#2 0x00000000004ba155 in srsenb::rrc::setup_ue_erabs(unsigned short,
LIBLTE_S1AP_MESSAGE_E_RABSETUPREQUEST_STRUCT*) ()
#3 0x00000000004ac9f3 in
srsenb::s1ap::handle_erabsetuprequest(LIBLTE_S1AP_MESSAGE_E_RABSETUPREQUEST_STRUCT*)
()
#4 0x00000000004b0a8d in
srsenb::s1ap::handle_s1ap_rx_pdu(srslte::byte_buffer_t*) ()
#5 0x00000000004b0ca5 in srsenb::s1ap::run_thread() ()
#6 0x00000000004aae89 in thread::thread_function_entry(void*) ()
#7 0x00007ffff7bc16ba in start_thread (arg=0x7fffc6cfb700)
at pthread_create.c:333
#8 0x00007ffff60db41d in clone ()
at ../sysdeps/unix/sysv/linux/x86_64/clone.S:109
(gdb) p e
$1 = {i = {0, 1127522290}, d = 5805361265115136}
(gdb)
best,
Sandi
On Fri, Nov 9, 2018 at 11:45 PM Andre Puschmann <
andre.puschmann at softwareradiosystems.com> wrote:
> Now type "bt"+Enter and then "p e"+Enter and send the output
>
>
> On 9/11/18 17:42, Sandi Suhendro wrote:
> > Dear Andre,
> > yes it crash, but the crash happen until I turn on the data in my phone.
> >
> > Here is the GDB trace :
> >
> > (gdb) run
> > Starting program: /usr/local/bin/srsenb
> > [Thread debugging using libthread_db enabled]
> > Using host libthread_db library
> "/lib/x86_64-linux-gnu/libthread_db.so.1".
> > [New Thread 0x7fffee667700 (LWP 7892)]
> > [New Thread 0x7fffede66700 (LWP 7893)]
> >
> > Built in Release mode using commit 1c015aab on branch master.
> >
> > --- Software Radio Systems LTE eNodeB ---
> >
> > Reading configuration file /home/duo/.srs/enb.conf...
> > Error: could not create log file, no messages will be logged!
> > [New Thread 0x7fffed665700 (LWP 7894)]
> > Failed to open file "/tmp/enb.pcap" for writing
> > linux; GNU C++ version 5.4.0 20160609; Boost_105800;
> > UHD_003.010.002.HEAD-0-gbd6e21dc
> >
> > [New Thread 0x7fffe867b700 (LWP 7895)]
> > [New Thread 0x7fffe7e7a700 (LWP 7896)]
> > [Thread 0x7fffe7e7a700 (LWP 7896) exited]
> > [New Thread 0x7fffe7679700 (LWP 7897)]
> > [New Thread 0x7fffe6e78700 (LWP 7898)]
> > [New Thread 0x7fffe6677700 (LWP 7899)]
> > [New Thread 0x7fffe5e76700 (LWP 7900)]
> > [New Thread 0x7fffe5675700 (LWP 7901)]
> > [Thread 0x7fffe867b700 (LWP 7895) exited]
> > [Thread 0x7fffe5e76700 (LWP 7900) exited]
> > [New Thread 0x7fffe5e76700 (LWP 7902)]
> > [Thread 0x7fffe5e76700 (LWP 7902) exited]
> > [New Thread 0x7fffe5e76700 (LWP 7903)]
> > [Thread 0x7fffe5e76700 (LWP 7903) exited]
> > Soapy has found device #0: addr=1d50:6108, driver=lime,
> > label=LimeSDR-USB [USB 3.0] 9061C02C73125, media=USB 3.0, module=FX3,
> > name=LimeSDR-USB, serial=0009061C02C73125,
> > [Thread 0x7fffe7679700 (LWP 7897) exited]
> > [INFO] Make connection: 'LimeSDR-USB [USB 3.0] 9061C02C73125'
> > [INFO] Reference clock 30.72 MHz
> > [INFO] Device name: LimeSDR-USB
> > [INFO] Reference: 30.72 MHz
> > [INFO] LMS7002M calibration values caching Disable
> > [INFO] RX LPF configured
> > Set Rx bandwidth to 2.50 MHz
> > [INFO] Filter calibrated. Filter order-4th, filter bandwidth set to 5
> > MHz.Real pole 1st order filter set to 2.5 MHz. Preemphasis filter not
> active
> > [INFO] TX LPF configured
> > Set Tx bandwidth to 5.00 MHz
> > Setting up RX stream
> > Setting up TX stream
> > Available device sensors:
> > - clock_locked
> > - lms7_temp
> > Available sensors for RX channel 0:
> > - lo_locked
> > [INFO] Tx calibration finished
> > [INFO] Rx calibration finished
> > [New Thread 0x7fffe7679700 (LWP 7904)]
> > [Thread 0x7fffe7679700 (LWP 7904) exited]
> > State of gain elements for Rx channel 0 (AGC not supported):
> > - TIA: 9.00 dB
> > - LNA: 30.00 dB
> > - PGA: -4.00 dB
> > State of gain elements for Tx channel 0 (AGC not supported):
> > - TIA: 9.00 dB
> > - LNA: 30.00 dB
> > - PGA: -4.00 dB
> > Rx antenna set to LNAH
> > Tx antenna set to BAND1
> > [New Thread 0x7fffe7679700 (LWP 7905)]
> >
> > Warning burst preamble is not calibrated for device lime. Set a value
> > manually
> >
> > Setting frequency: DL=1845.0 Mhz, UL=1750.0 MHz
> > Tuned Tx to 1845.00 MHz
> > Tuned Rx to 1750.00 MHz
> > [New Thread 0x7fffe5e76700 (LWP 7906)]
> > Warning: Failed to create thread with real-time priority. Creating it
> > with normal priority: Cannot allocate memory
> > [New Thread 0x7fffe7e7a700 (LWP 7907)]
> > [Thread 0x7fffe5e76700 (LWP 7906) exited]
> > [New Thread 0x7fffe867b700 (LWP 7908)]
> > Warning: Failed to create thread with real-time priority. Creating it
> > with normal priority: Cannot allocate memory
> > [New Thread 0x7fffca502700 (LWP 7909)]
> > [Thread 0x7fffe867b700 (LWP 7908) exited]
> > [New Thread 0x7fffc9d01700 (LWP 7910)]
> > Warning: Failed to create thread with real-time priority. Creating it
> > with normal priority: Cannot allocate memory
> > [New Thread 0x7fffc9500700 (LWP 7911)]
> > [Thread 0x7fffc9d01700 (LWP 7910) exited]
> > [New Thread 0x7fffc8cff700 (LWP 7912)]
> > Warning: Failed to create thread with real-time priority. Creating it
> > with normal priority: Cannot allocate memory
> > [New Thread 0x7fffc84fe700 (LWP 7913)]
> > [Thread 0x7fffc8cff700 (LWP 7912) exited]
> > [New Thread 0x7fffc7cfd700 (LWP 7914)]
> > [New Thread 0x7fffc74fc700 (LWP 7915)]
> > [New Thread 0x7fffc6cfb700 (LWP 7916)]
> > [New Thread 0x7fffc64fa700 (LWP 7917)]
> > [New Thread 0x7fffc5cf9700 (LWP 7918)]
> > [New Thread 0x7fffc54f8700 (LWP 7919)]
> > Set master clock rate to 15.36 MHz
> > Setting Sampling frequency 3.84 MHz
> > [INFO] RX LPF configured
> > Set Rx bandwidth to 2.88 MHz
> > [INFO] Filter calibrated. Filter order-4th, filter bandwidth set to 5
> > MHz.Real pole 1st order filter set to 2.5 MHz. Preemphasis filter not
> active
> > [INFO] TX LPF configured
> > Set Tx bandwidth to 5.00 MHz
> > Setting manual TX/RX offset to 72 samples
> >
> > ==== eNodeB started ===
> > Type <t> to view trace
> > [INFO] Tx calibration finished
> > [INFO] Rx calibration finished
> > [New Thread 0x7fffc4cf7700 (LWP 7920)]
> > [New Thread 0x7fffb7fff700 (LWP 7921)]
> > [WARNING] L
> > RACH: tti=6381, preamble=29, offset=3, temp_crnti=0x46
> > Error: Can't write to empty file handle
> > Error: Can't write to empty file handle
> > Error: Can't write to empty file handle
> > Error: Can't write to empty file handle
> > Error: Can't write to empty file handle
> > Error: Can't write to empty file handle
> > Error: Can't write to empty file handle
> > Error: Can't write to empty file handle
> > Error: Can't write to empty file handle
> > Error: Can't write to empty file handle
> > Error: Can't write to empty file handle
> > Error: Can't write to empty file handle
> > Error: Can't write to empty file handle
> > Error: Can't write to empty file handle
> > Error: Can't write to empty file handle
> > Error: Can't write to empty file handle
> > [WARNING] L
> > Error: Can't write to empty file handle
> > Error: Can't write to empty file handle
> > Error: Can't write to empty file handle
> > User 0x46 connected
> > Error: Can't write to empty file handle
> > Error: Can't write to empty file handle
> > Error: Can't write to empty file handle
> > Error: Can't write to empty file handle
> > Error: Can't write to empty file handle
> > Error: Can't write to empty file handle
> > Error: Can't write to empty file handle
> > Error: Can't write to empty file handle
> > Error: Can't write to empty file handle
> > [WARNING] L
> > Error: Can't write to empty file handle
> > Error: Can't write to empty file handle
> >
> > Thread 26 "srsenb" received signal SIGBUS, Bus error.
> > [Switching to Thread 0x7fffc6cfb700 (LWP 7916)]
> > 0x00000000004b7c7e in
> >
> srsenb::rrc::ue::send_connection_reconf_new_bearer(LIBLTE_S1AP_E_RABTOBESETUPLISTBEARERSUREQ_STRUCT*)
> > ()
> > (gdb)
> >
> > the enb.log same as attached.
> >
> >
> > On Fri, Nov 9, 2018 at 11:34 PM Andre Puschmann
> > <andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>> wrote:
> >
> > Hey,
> >
> > what do you mean by "stop by it self"? Does it crash? If so, send the
> > backtrace file that is generated. You can also try to run the eNB in
> gdb
> > with "gdb --args srsenb".
> >
> > Thanks
> > Andre
> >
> > On 9/11/18 17:24, Sandi Suhendro wrote:
> > > Hi Andre,
> > > I set it to enable but its empty on tmp, thats why I create from
> > wireshark.
> > > also, I cannot close enb cause it stop by it self when turn on the
> > data.
> > >
> > > here we go again the file attached.
> > >
> > > best,
> > > Sandi
> > >
> > > On Fri, Nov 9, 2018 at 11:15 PM Andre Puschmann
> > > <andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>
> > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>>> wrote:
> > >
> > > Hey,
> > >
> > > the enb.log is corrupted at the end (i.e. not all is written
> > to the
> > > file). Can you rerun and close the eNB properly so it will
> > write the
> > > entire logs? Also, please capture eNB PCAP by either turning
> > PCAP on in
> > > the config for appending --pcap.enable=true on the command
> line.
> > >
> > > Thanks
> > > Andre
> > >
> > >
> > > On 9/11/18 16:56, Sandi Suhendro wrote:
> > > > Dear Andre,
> > > > here is the pcap and enb.log attached.
> > > >
> > > > the connection is drop when I turn on the data.
> > > > and here is the srsenb log on the terminal :
> > > >
> > > > <<<<<<<<<<<<
> > > > --- Software Radio Systems LTE eNodeB ---
> > > >
> > > > Reading configuration file /home/duo/.srs/enb.conf...
> > > > linux; GNU C++ version 5.4.0 20160609; Boost_105800;
> > > > UHD_003.010.002.HEAD-0-gbd6e21dc
> > > >
> > > > Soapy has found device #0: addr=1d50:6108, driver=lime,
> > > > label=LimeSDR-USB [USB 3.0] 9061C02C73125, media=USB 3.0,
> > module=FX3,
> > > > name=LimeSDR-USB, serial=0009061C02C73125,
> > > > [INFO] Make connection: 'LimeSDR-USB [USB 3.0] 9061C02C73125'
> > > > [INFO] Reference clock 30.72 MHz
> > > > [INFO] Device name: LimeSDR-USB
> > > > [INFO] Reference: 30.72 MHz
> > > > [INFO] LMS7002M calibration values caching Disable
> > > > [INFO] RX LPF configured
> > > > Set Rx bandwidth to 2.50 MHz
> > > > [INFO] Filter calibrated. Filter order-4th, filter bandwidth
> > set to 5
> > > > MHz.Real pole 1st order filter set to 2.5 MHz. Preemphasis
> > filter
> > > not active
> > > > [INFO] TX LPF configured
> > > > Set Tx bandwidth to 5.00 MHz
> > > > Setting up RX stream
> > > > Setting up TX stream
> > > > Available device sensors:
> > > > - clock_locked
> > > > - lms7_temp
> > > > Available sensors for RX channel 0:
> > > > - lo_locked
> > > > [INFO] Tx calibration finished
> > > > [INFO] Rx calibration finished
> > > > State of gain elements for Rx channel 0 (AGC not supported):
> > > > - TIA: 9.00 dB
> > > > - LNA: 30.00 dB
> > > > - PGA: -4.00 dB
> > > > State of gain elements for Tx channel 0 (AGC not supported):
> > > > - TIA: 9.00 dB
> > > > - LNA: 30.00 dB
> > > > - PGA: -4.00 dB
> > > > Rx antenna set to LNAH
> > > > Tx antenna set to BAND1
> > > >
> > > > Warning burst preamble is not calibrated for device lime.
> > Set a value
> > > > manually
> > > >
> > > > Setting frequency: DL=1845.0 Mhz, UL=1750.0 MHz
> > > > Tuned Tx to 1845.00 MHz
> > > > Tuned Rx to 1750.00 MHz
> > > > Set master clock rate to 15.36 MHz
> > > > Setting Sampling frequency 3.84 MHz
> > > > [INFO] RX LPF configured
> > > > Set Rx bandwidth to 2.88 MHz
> > > > [INFO] Filter calibrated. Filter order-4th, filter bandwidth
> > set to 5
> > > > MHz.Real pole 1st order filter set to 2.5 MHz. Preemphasis
> > filter
> > > not active
> > > > [INFO] TX LPF configured
> > > > Set Tx bandwidth to 5.00 MHz
> > > > Setting manual TX/RX offset to 72 samples
> > > >
> > > > ==== eNodeB started ===
> > > > Type <t> to view trace
> > > > [INFO] Tx calibration finished
> > > > [INFO] Rx calibration finished
> > > > [WARNING] L
> > > > RACH: tti=9281, preamble=45, offset=3, temp_crnti=0x46
> > > > Unhandled feature in RRC function:
> > > > liblte_rrc_unpack_rrc_connection_setup_complete_msg
> > > >
> > > > User 0x46 connected
> > > > Bus error *(this happen when tuen on the data)*
> > > >>>>>>>>>>>>>>>>>>>>>>>>
> > > >
> > > > I think the problem related this message : Unhandled feature
> > in RRC
> > > > function: liblte_rrc_unpack_rrc_connection_setup_complete_msg
> > > >
> > > > looking forward to hearing advise from you! :-)
> > > >
> > > > Many Thanks.
> > > >
> > > > regards,
> > > > Sandi / DUO
> > > >
> > > > On Fri, Nov 9, 2018 at 3:57 PM Andre Puschmann
> > > > <andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>
> > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>>
> > > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>
> > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>>>> wrote:
> > > >
> > > > Hey,
> > > >
> > > > can you provide a eNB log with loglevel info along with
> the
> > > > correpsonding S1 pcap, please? From the last PCAP you
> sent
> > > everything
> > > > looked fine at first glance.
> > > >
> > > > Thanks
> > > > Andre
> > > >
> > > >
> > > > On 8/11/18 10:23, ALEJANDRO BLANCO PIZARRO wrote:
> > > > > Hi Sandi,
> > > > >
> > > > > Hi I am not an expert on LimeSRD and srsLTE, because I
> > > always use
> > > > USRP.
> > > > > But, when the UE cannot attach correctly it is
> probably a
> > > > > misconfiguration in the EPC, what EPC are you using?
> > If you
> > > can attach
> > > > > the log of the EPC it will be great.
> > > > >
> > > > > BTW, 25MHz is pnb=25, not 15. If I were you, I would
> > > configure the
> > > > basic
> > > > > set up, change the value of pnb to 6.
> > > > >
> > > > > Best,
> > > > > Alejandro
> > > > >
> > > > > El jue., 8 nov. 2018 a las 5:08, Sandi Suhendro
> > > (<djks74 at gmail.com <mailto:djks74 at gmail.com>
> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>
> > > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>
> > > > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>
> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>>>) escribió:
> > > > >
> > > > > Hi Alejandro,
> > > > > Change to 5mhz set on pnb=15
> > > > >
> > > > > Same result. :(
> > > > > Always hangup after turn on data.
> > > > >
> > > > > Regards,
> > > > > Sandi
> > > > >
> > > > > On Wed, Nov 7, 2018, 23:36 ALEJANDRO BLANCO PIZARRO
> > > > > <100283180 at alumnos.uc3m.es
> > <mailto:100283180 at alumnos.uc3m.es>
> > > <mailto:100283180 at alumnos.uc3m.es
> > <mailto:100283180 at alumnos.uc3m.es>>
> > <mailto:100283180 at alumnos.uc3m.es <mailto:100283180 at alumnos.uc3m.es>
> > > <mailto:100283180 at alumnos.uc3m.es
> > <mailto:100283180 at alumnos.uc3m.es>>>
> > > > <mailto:100283180 at alumnos.uc3m.es
> > <mailto:100283180 at alumnos.uc3m.es>
> > > <mailto:100283180 at alumnos.uc3m.es
> > <mailto:100283180 at alumnos.uc3m.es>>
> > > > <mailto:100283180 at alumnos.uc3m.es
> > <mailto:100283180 at alumnos.uc3m.es>
> > > <mailto:100283180 at alumnos.uc3m.es
> > <mailto:100283180 at alumnos.uc3m.es>>>> wrote:
> > > > >
> > > > > Have you tried to decrement the bandwidth? It
> > could be
> > > > that with
> > > > > your bandwidth, you have bottleneck. Try 5 MHz.
> > > > >
> > > > > Best,
> > > > > Alejandro
> > > > >
> > > > > El mié., 7 nov. 2018 16:53, Sandi Suhendro
> > > > <djks74 at gmail.com <mailto:djks74 at gmail.com>
> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>
> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>
> > > > > <mailto:djks74 at gmail.com
> > <mailto:djks74 at gmail.com> <mailto:djks74 at gmail.com
> > <mailto:djks74 at gmail.com>>
> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>>> escribió:
> > > > >
> > > > > Dear Ignas, Andre,
> > > > > the phone is attached but it produce an
> error
> > > when turn on
> > > > > the cellular data on my phone: (VIVO XShot)
> > > > >
> > > > > here is the log : (pcap attached)
> > > > >
> > > > > ==== eNodeB started ===
> > > > > Type <t> to view trace
> > > > > [INFO] Tx calibration finished
> > > > > [INFO] Rx calibration finished
> > > > > [WARNING] L
> > > > > [WARNING] L
> > > > > RACH: tti=10221, preamble=23, offset=1,
> > > temp_crnti=0x46
> > > > > RACH: tti=1, preamble=23, offset=1,
> > temp_crnti=0x47
> > > > > Disconnecting rnti=0x46.
> > > > > Disconnecting rnti=0x47.
> > > > > RACH: tti=381, preamble=44, offset=1,
> > > temp_crnti=0x48
> > > > > Disconnecting rnti=0x48.
> > > > > RACH: tti=2891, preamble=22, offset=1,
> > > temp_crnti=0x49
> > > > > Unhandled feature in RRC function:
> > > > >
> > liblte_rrc_unpack_rrc_connection_setup_complete_msg
> > > > >
> > > > > Disconnecting rnti=0x49.
> > > > > RACH: tti=4671, preamble=9, offset=1,
> > > temp_crnti=0x4a
> > > > > Unhandled feature in RRC function:
> > > > >
> > liblte_rrc_unpack_rrc_connection_setup_complete_msg
> > > > >
> > > > > User 0x4a connected
> > > > > Bus error
> > > > > >>>>>>>>>>>>>>>>.
> > > > >
> > > > > hope you can give me advise what is wrong?
> > Thanks in
> > > > advance.
> > > > >
> > > > > regards,
> > > > > DUO / Sandi
> > > > >
> > > > >
> > > > >
> > > > > On Tue, Nov 6, 2018 at 8:43 PM Sandi
> Suhendro
> > > > > <djks74 at gmail.com
> > <mailto:djks74 at gmail.com> <mailto:djks74 at gmail.com
> > <mailto:djks74 at gmail.com>>
> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>
> > > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>
> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>>> wrote:
> > > > >
> > > > > Dear Ignas,
> > > > > Thanks to let me know to update. Now it
> > > works and
> > > > i saw
> > > > > my 4g network now. :)
> > > > >
> > > > > Just strange not all phone see the
> > network. Will
> > > > try to
> > > > > attach now. :)
> > > > >
> > > > > Thanks and warm regards,
> > > > > Sandi
> > > > >
> > > > > On Tue, Nov 6, 2018, 19:56 Ignas
> > Jarusevicius
> > > > > <i.jarusevicius at limemicro.com
> > <mailto:i.jarusevicius at limemicro.com>
> > > <mailto:i.jarusevicius at limemicro.com
> > <mailto:i.jarusevicius at limemicro.com>>
> > > > <mailto:i.jarusevicius at limemicro.com
> > <mailto:i.jarusevicius at limemicro.com>
> > > <mailto:i.jarusevicius at limemicro.com
> > <mailto:i.jarusevicius at limemicro.com>>>
> > > > > <mailto:i.jarusevicius at limemicro.com
> > <mailto:i.jarusevicius at limemicro.com>
> > > <mailto:i.jarusevicius at limemicro.com
> > <mailto:i.jarusevicius at limemicro.com>>
> > > > <mailto:i.jarusevicius at limemicro.com
> > <mailto:i.jarusevicius at limemicro.com>
> > > <mailto:i.jarusevicius at limemicro.com
> > <mailto:i.jarusevicius at limemicro.com>>>> wrote:
> > > > >
> > > > > Hi Sandri,
> > > > >
> > > > > I have noticed that you are using
> old
> > > libLimeSuite
> > > > > version as recent versions show
> > > 'module=FX3' for
> > > > > LimeSDR-USB. So try updating
> > LimeSuite.
> > > > > Also, I was I able to get srsenb
> > working
> > > with
> > > > > LimeSDR boards few months ago. I
> have
> > > attached one
> > > > > of my enb.conf that used to work
> (not
> > > sure if it
> > > > > still works with current srsLTE
> > version).
> > > > >
> > > > > -Ignas
> > > > >
> > > > > On 2018-11-05 16:02, Sandi
> > Suhendro wrote:
> > > > >> Hi Andre,
> > > > >> ok finally working to Lime direct
> via
> > > Soapy, just
> > > > >> edit the makelist text and remove
> > the UHD.
> > > > >>
> > > > >> here I got more error, what
> > should I do?
> > > > >>
> > > > >> <<<<<<<<<<
> > > > >> --- Software Radio Systems LTE
> > eNodeB ---
> > > > >>
> > > > >> Reading configuration file
> > > > /home/duo/.srs/enb.conf...
> > > > >> Soapy has found device #0:
> > addr=1d50:6108,
> > > > >> driver=lime, label=LimeSDR-USB
> > [USB 3.0]
> > > > >> 9061C02C73125, media=USB 3.0,
> > > module=STREAM,
> > > > >> name=LimeSDR-USB,
> > serial=0009061C02C73125,
> > > > >> [INFO] Make connection:
> 'LimeSDR-USB
> > > [USB 3.0]
> > > > >> 9061C02C73125'
> > > > >> [INFO] Device name: LimeSDR-USB
> > > > >> [INFO] Reference: 30.72 MHz
> > > > >> [INFO] Init LMS7002M(0)
> > > > >> [INFO] Ver=7, Rev=1, Mask=1
> > > > >> [INFO] LMS7002M calibration values
> > > caching Enable
> > > > >> Set Rx bandwidth to 2.50 MHz
> > > > >> [ERROR] setBandwidth(Tx, 0, 1.44
> MHz)
> > > Failed - Tx
> > > > >> lpf(1.44 MHz) out of range 5-40
> > MHz and
> > > > 50-130 MHz
> > > > >> setBandwidth fail: Tx lpf(1.44
> > MHz) out
> > > of range
> > > > >> 5-40 MHz and 50-130 MHz
> > > > >> Setting up RX stream
> > > > >> Setting up TX stream
> > > > >> Available device sensors:
> > > > >> - clock_locked
> > > > >> - lms7_temp
> > > > >> Available sensors for RX channel
> 0:
> > > > >> - lo_locked
> > > > >> State of gain elements for Rx
> > channel 0
> > > (AGC not
> > > > >> supported):
> > > > >> - LNA: 30.00 dB
> > > > >> - TIA: 0.00 dB
> > > > >> - PGA: 5.00 dB
> > > > >> State of gain elements for Tx
> > channel 0
> > > (AGC not
> > > > >> supported):
> > > > >> - LNA: nan dB
> > > > >> - TIA: nan dB
> > > > >> - PGA: nan dB
> > > > >> Rx antenna set to LNAL
> > > > >> Tx antenna set to BAND1
> > > > >>
> > > > >> Warning burst preamble is not
> > > calibrated for
> > > > >> device lime. Set a value manually
> > > > >>
> > > > >> Setting frequency: DL=1845.0 Mhz,
> > > UL=1750.0 MHz
> > > > >> Tuned Tx to 1845.00 MHz
> > > > >> Tuned Rx to 1750.00 MHz
> > > > >> Set master clock rate to 11.52 MHz
> > > > >> Setting Sampling frequency 11.52
> MHz
> > > > >> setSampleRate Rx fail:
> > > SoapyLMS7::setSampleRate()
> > > > >> -- rate too high
> > > > >> setSampleRate Tx fail:
> > > SoapyLMS7::setSampleRate()
> > > > >> -- rate too high
> > > > >>
> > > > >> Warning TX/RX time offset for
> > sampling rate
> > > > -1 KHz
> > > > >> not calibrated. Using
> > interpolated value
> > > > >>
> > > > >>
> > > > >> ==== eNodeB started ===
> > > > >> Type <t> to view trace
> > > > >>
> > > > >> >>>>>>>>>>>>>>
> > > > >>
> > > > >> Please advise! Thanks. :-)
> > > > >>
> > > > >> regards,
> > > > >> Sandi / DUO
> > > > >>
> > > > >>
> > > > >> On Mon, Nov 5, 2018 at 8:07 PM
> Sandi
> > > Suhendro
> > > > >> <djks74 at gmail.com
> > <mailto:djks74 at gmail.com>
> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>
> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>
> > > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>
> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>>> wrote:
> > > > >>
> > > > >> I did try remove the soapyUHD
> and
> > > delete the
> > > > >> libuhd and libuhdsupport from
> > > usr/local/lib,
> > > > >> but when re install the
> > srs-LTE, it
> > > gives me
> > > > >> error it need UHD.
> > > > >> do you know it may cause I
> > miss it
> > > how to
> > > > >> build srsLTE direct to
> soapySDR?
> > > > >>
> > > > >> anyway, it has output signal
> on
> > > earfcn 1600,
> > > > >> but dont see the network with
> > UHD.
> > > > >>
> > > > >> maybe better using soapySDR
> > instead
> > > UHD, but
> > > > >> the installation asking UHD.
> > > > >>
> > > > >> please advise.
> > > > >>
> > > > >> regards,
> > > > >> Sandi
> > > > >>
> > > > >> On Mon, Nov 5, 2018 at 3:11
> > AM Andre
> > > > Puschmann
> > > > >>
> > > <andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>
> > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>>
> > > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>
> > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>>>
> > > > >>
> > > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>
> > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>>
> > > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>
> > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>>>>>
> > > > >> wrote:
> > > > >>
> > > > >> Hey,
> > > > >>
> > > > >> seems like you are trying
> to
> > > run the Lime
> > > > >> through UHD, i.e. using
> the
> > > > >> uhd-soapy wrapper. I am
> not
> > > sure if it is
> > > > >> working well but maybe it
> > > > >> does. Does it output a
> > signal?
> > > > >>
> > > > >> We do have a Soapy driver
> > which
> > > also
> > > > works
> > > > >> with the Lime so maybe try
> > > > >> using that instead.
> Probably
> > > the easiest
> > > > >> is to uninstall the
> uhd-soapy
> > > > >> wrapper. The problem here
> is
> > > that the
> > > > >> srsLTE's RF driver
> > library stops
> > > > >> looking for other devices
> as
> > > soon as a
> > > > >> supported device is found
> > and the
> > > > >> UHD driver is the first
> > to query.
> > > > >>
> > > > >>
> > > > >> Hope that helps.
> > > > >>
> > > > >> Cheers
> > > > >> Andre
> > > > >>
> > > > >>
> > > > >>
> > > > >>
> > > > >> On 4/11/18 15:07, Sandi
> > > Suhendro wrote:
> > > > >> > Dear Andre,
> > > > >> > Do you know what I miss?
> > > > >> > I have this following
> > error :
> > > > >> > <<<<<<<<<
> > > > >> > sudo srsenb
> > > > >> > linux; GNU C++ version
> > 5.4.0
> > > 20160609;
> > > > >> Boost_105800;
> > > > >> >
> > UHD_003.010.002.HEAD-0-gbd6e21dc
> > > > >> >
> > > > >> >
> > > > >> > Built in Release mode
> using
> > > commit
> > > > >> 1c015aab on branch master.
> > > > >> >
> > > > >> > --- Software Radio
> > Systems LTE
> > > > eNodeB ---
> > > > >> >
> > > > >> > Reading configuration
> file
> > > > >> /home/duo/.srs/enb.conf...
> > > > >> > Opening USRP with args:
> > > > >> > -- Make connection:
> > > 'LimeSDR-USB [USB
> > > > >> 3.0] 9061C02C73125'
> > > > >> > -- Device name:
> LimeSDR-USB
> > > > >> > -- Reference: 30.72 MHz
> > > > >> > -- Init LMS7002M(0)
> > > > >> > -- Ver=7, Rev=1, Mask=1
> > > > >> > -- LMS7002M calibration
> > > values caching
> > > > >> Enable
> > > > >> > Setting frequency:
> > DL=1845.0 Mhz,
> > > > >> UL=1750.0 MHz
> > > > >> > Setting Sampling
> frequency
> > > 11.52 MHz
> > > > >> >
> > > > >> > Warning TX/RX time
> > offset has
> > > not been
> > > > >> calibrated for device
> > > > >> > uhd_unknown. Set a
> > value manually
> > > > >> >
> > > > >> >
> > > > >> > ==== eNodeB started ===
> > > > >> > Type <t> to view trace
> > > > >> > Error timed out while
> > > receiving samples
> > > > >> from UHD.
> > > > >> > Error timed out while
> > > receiving samples
> > > > >> from UHD.
> > > > >> > Error timed out while
> > > receiving samples
> > > > >> from UHD.
> > > > >> >>>>>>>>>>>>
> > > > >> >
> > > > >> > And in the log of
> > nextepc is :
> > > > >> > [11/04 20:48:59.179]
> eNB-S1
> > > > >> accepted[127.0.1.1]:55722
> in
> > > s1_path
> > > > module
> > > > >> > [11/04 20:48:59.180]
> eNB-S1
> > > > >> accepted[127.0.1.1] in
> > > master_sm module
> > > > >> >
> > > > >> >
> > > > >> > Please advise! Thanks in
> > > advance. :-)
> > > > >> >
> > > > >> > regards,
> > > > >> > Sandi / DUO
> > > > >> >
> > > > >> >
> > > > >> > On Fri, Nov 2, 2018 at
> 3:51
> > > PM Andre
> > > > >> Puschmann
> > > > >> >
> > > > >>
> > > > <andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>
> > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>>
> > > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>
> > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>>>
> > > > >>
> > > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>
> > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>>
> > > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>
> > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>>>>
> > > > >> >
> > > > >>
> > > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>
> > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>>
> > > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>
> > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>>>
> > > > >>
> > > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>
> > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>>
> > > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>
> > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>>>>>>
> > > > >> wrote:
> > > > >> >
> > > > >> > Sandi,
> > > > >> >
> > > > >> > glad to hear you
> got it
> > > > working. Let
> > > > >> us know how it goes.
> > > > >> >
> > > > >> > Cheers
> > > > >> > Andre
> > > > >> >
> > > > >> > On 2/11/18 8:54,
> Sandi
> > > Suhendro
> > > > wrote:
> > > > >> > > Dear Andre,
> > > > >> > > sorry for this
> simple
> > > matter. try
> > > > >> to remove all and re
> > install and it
> > > > >> > > works now. Thanks.
> > > > >> > >
> > > > >> > > regards,
> > > > >> > > Sandi / DUO
> > > > >> > >
> > > > >> > > On Thu, Nov 1,
> > 2018 at
> > > 10:33 PM
> > > > >> Sandi Suhendro
> > > <djks74 at gmail.com <mailto:djks74 at gmail.com>
> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>
> > > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>
> > > > >> <mailto:djks74 at gmail.com
> > <mailto:djks74 at gmail.com>
> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>
> > > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>>
> > > > >> >
> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>
> > > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>
> > > > >> <mailto:djks74 at gmail.com
> > <mailto:djks74 at gmail.com>
> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>
> > > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>>>
> > > > >> > >
> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>
> > > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>
> > > > >> <mailto:djks74 at gmail.com
> > <mailto:djks74 at gmail.com>
> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>
> > > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>>
> > > > >> <mailto:djks74 at gmail.com
> > <mailto:djks74 at gmail.com>
> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>
> > > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>
> > > > >> <mailto:djks74 at gmail.com
> > <mailto:djks74 at gmail.com>
> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>
> > > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>>>>> wrote:
> > > > >> > >
> > > > >> > > Dear Andre,
> > > > >> > > Thanks for
> > response.
> > > > >> > >
> > > > >> > > Im using
> ubuntu
> > > 16.04 and
> > > > >> build soapySDR from git.
> > > > >> > > as I remember
> Im
> > > using ppa at
> > > > >> first but I also install
> > again
> > > > >> > from git.
> > > > >> > > what should I
> do?
> > > remove all
> > > > >> soapy from apt and make
> > uninstall
> > > > >> > from
> > > > >> > > git too then
> re
> > > install?
> > > > >> > >
> > > > >> > > please advise.
> > > > >> > >
> > > > >> > > regards,
> > > > >> > > Sandi / DUO
> > > > >> > >
> > > > >> > > On Thu, Nov
> > 1, 2018 at
> > > > 9:33 PM
> > > > >> Andre Puschmann
> > > > >> > >
> > > > >>
> > > > <andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>
> > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>>
> > > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>
> > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>>>
> > > > >>
> > > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>
> > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>>
> > > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>
> > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>>>>
> > > > >> >
> > > > >>
> > > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>
> > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>>
> > > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>
> > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>>>
> > > > >>
> > > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>
> > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>>
> > > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>
> > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>>>>>
> > > > >> > >
> > > > >>
> > > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>
> > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>>
> > > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>
> > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>>>
> > > > >>
> > > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>
> > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>>
> > > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>
> > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>>>>
> > > > >> >
> > > > >>
> > > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>
> > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>>
> > > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>
> > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>>>
> > > > >>
> > > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>
> > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>>
> > > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>
> > > <mailto:andre.puschmann at softwareradiosystems.com
> > <mailto:andre.puschmann at softwareradiosystems.com>>>>>>>
> > > > >> wrote:
> > > > >> > >
> > > > >> > > Likely to
> > be a
> > > > mismatch of
> > > > >> headers. What system are
> > you on and
> > > > >> > > where do
> > > > >> > > you get
> the
> > > soapy dev
> > > > >> package from? git, ppa?
> > > > >> > >
> > > > >> > >
> > > > >> > > On
> 31/10/18
> > > 12:43, Sandi
> > > > >> Suhendro wrote:
> > > > >> > > > Dear
> list,
> > > > >> > > > hope
> > someone can
> > > > give me
> > > > >> advise what is wrong?
> > > > >> > > > Im
> runing
> > > fine with
> > > > >> osmocom or openbts-umts.
> > (2g/3g)
> > > > >> > > > but....
> > > > >> > > > Im
> facing
> > > SoapySDR
> > > > range
> > > > >> error when build srsLTE :
> > > > >> > > >
> > > > >> > > > [ 40%]
> > Linking C
> > > > >> executable pdsch_test
> > > > >> > > > [ 40%]
> > Built
> > > target
> > > > >> pdsch_test
> > > > >> > > > [ 40%]
> > Building C
> > > > object
> > > > >> > > >
> > > > >>
> > > >
> lib/src/phy/rf/CMakeFiles/srslte_rf_utils.dir/rf_utils.c.o
> > > > >> > > > [ 40%]
> > > Linking C static
> > > > >> library
> libsrslte_rf_utils.a
> > > > >> > > > [ 40%]
> > Built
> > > target
> > > > >> srslte_rf_utils
> > > > >> > > > [ 41%]
> > Building C
> > > > object
> > > > >> > >
> > > > >>
> > > > lib/src/phy/rf/CMakeFiles/srslte_rf.dir/rf_imp.c.o
> > > > >> > > > [ 41%]
> > Building C
> > > > object
> > > > >> > > >
> > > > >>
> > > > lib/src/phy/rf/CMakeFiles/srslte_rf.dir/rf_uhd_imp.c.o
> > > > >> > > > [ 41%]
> > > Building CXX
> > > > object
> > > > >> > > >
> > > > >>
> > > > lib/src/phy/rf/CMakeFiles/srslte_rf.dir/uhd_c_api.cpp.o
> > > > >> > > > [ 41%]
> > Building C
> > > > object
> > > > >> > > >
> > > > >>
> > > > lib/src/phy/rf/CMakeFiles/srslte_rf.dir/rf_soapy_imp.c.o
> > > > >> > > > In file
> > > included from
> > > > >> > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
> > > > >> > > >
> > > > >>
> > /usr/include/SoapySDR/Types.h:25:3:
> > > > error:
> > > > >> conflicting
> > > > >> > types for
> > > > >> > > >
> > ‘SoapySDRRange’
> > > > >> > > > }
> > SoapySDRRange;
> > > > >> > > > ^
> > > > >> > > > In file
> > > included from
> > > > >> >
> > > > >>
> > > > /usr/local/include/SoapySDR/Device.h:18:0,
> > > > >> > > >
> > > from
> > > > >> > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
> > > > >> > > >
> > > > >>
> > > /usr/local/include/SoapySDR/Types.h:25:3:
> > > > >> note: previous
> > > > >> > >
> > declaration of
> > > > >> > > >
> > > ‘SoapySDRRange’ was
> > > > here
> > > > >> > > > }
> > SoapySDRRange;
> > > > >> > > > ^
> > > > >> > > > In file
> > > included from
> > > > >> > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
> > > > >> > > >
> > > > >>
> > /usr/include/SoapySDR/Types.h:33:3:
> > > > error:
> > > > >> conflicting
> > > > >> > types for
> > > > >> > > >
> > ‘SoapySDRKwargs’
> > > > >> > > > }
> > > SoapySDRKwargs;
> > > > >> > > > ^
> > > > >> > > > In file
> > > included from
> > > > >> >
> > > > >>
> > > > /usr/local/include/SoapySDR/Device.h:18:0,
> > > > >> > > >
> > > from
> > > > >> > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
> > > > >> > > >
> > > > >>
> > > /usr/local/include/SoapySDR/Types.h:33:3:
> > > > >> note: previous
> > > > >> > >
> > declaration of
> > > > >> > > >
> > ‘SoapySDRKwargs’
> > > > was here
> > > > >> > > > }
> > > SoapySDRKwargs;
> > > > >> > > > ^
> > > > >> > > > In file
> > > included from
> > > > >> > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
> > > > >> > > >
> > > > >>
> > > /usr/include/SoapySDR/Types.h:39:30:
> > > > >> error: conflicting
> > > > >> > types for
> > > > >> > > >
> > > > ‘SoapySDRKwargs_fromString’
> > > > >> > > >
> > SOAPY_SDR_API
> > > > >> SoapySDRKwargs
> > > > >> >
> > > SoapySDRKwargs_fromString(const
> > > > >> > > char
> > *markup);
> > > > >> > > >
> > > > >>
> > ^
> > > > >> > > > In file
> > > included from
> > > > >> >
> > > > >>
> > > > /usr/local/include/SoapySDR/Device.h:18:0,
> > > > >> > > >
> > > from
> > > > >> > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
> > > > >> > > >
> > > > >>
> > > > /usr/local/include/SoapySDR/Types.h:39:30:
> > > > >> note: previous
> > > > >> > >
> > declaration of
> > > > >> > > >
> > > > >>
> > ‘SoapySDRKwargs_fromString’ was
> > > here
> > > > >> > > >
> > SOAPY_SDR_API
> > > > >> SoapySDRKwargs
> > > > >> >
> > > SoapySDRKwargs_fromString(const
> > > > >> > > char
> > *markup);
> > > > >> > > >
> > > > >>
> > ^
> > > > >> > > > In file
> > > included from
> > > > >> > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
> > > > >> > > >
> > > > >>
> > > /usr/include/SoapySDR/Types.h:45:21:
> > > > >> error: conflicting
> > > > >> > types for
> > > > >> > > >
> > > > ‘SoapySDRKwargs_toString’
> > > > >> > > >
> > > SOAPY_SDR_API char
> > > > >>
> > *SoapySDRKwargs_toString(const
> > > > >> > >
> > SoapySDRKwargs
> > > *args);
> > > > >> > > >
> > > ^
> > > > >> > > > In file
> > > included from
> > > > >> >
> > > > >>
> > > > /usr/local/include/SoapySDR/Device.h:18:0,
> > > > >> > > >
> > > from
> > > > >> > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
> > > > >> > > >
> > > > >>
> > > > /usr/local/include/SoapySDR/Types.h:45:21:
> > > > >> note: previous
> > > > >> > >
> > declaration of
> > > > >> > > >
> > > > >> ‘SoapySDRKwargs_toString’
> > was here
> > > > >> > > >
> > > SOAPY_SDR_API char
> > > > >>
> > *SoapySDRKwargs_toString(const
> > > > >> > >
> > SoapySDRKwargs
> > > *args);
> > > > >> > > >
> > > ^
> > > > >> > > > In file
> > > included from
> > > > >> > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
> > > > >> > > >
> > > > >>
> > /usr/include/SoapySDR/Types.h:50:5:
> > > > error:
> > > > >> redeclaration of
> > > > >> > > enumerator
> > > > >> > > >
> > > > ‘SOAPY_SDR_ARG_INFO_BOOL’
> > > > >> > > >
> > > > >> SOAPY_SDR_ARG_INFO_BOOL,
> > > > >> > > > ^
> > > > >> > > > In file
> > > included from
> > > > >> >
> > > > >>
> > > > /usr/local/include/SoapySDR/Device.h:18:0,
> > > > >> > > >
> > > from
> > > > >> > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
> > > > >> > > >
> > > > >>
> > > /usr/local/include/SoapySDR/Types.h:50:5:
> > > > >> note: previous
> > > > >> > >
> definition of
> > > > >> > > >
> > > > >> ‘SOAPY_SDR_ARG_INFO_BOOL’
> > was here
> > > > >> > > >
> > > > >> SOAPY_SDR_ARG_INFO_BOOL,
> > > > >> > > > ^
> > > > >> > > > In file
> > > included from
> > > > >> > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
> > > > >> > > >
> > > > >>
> > /usr/include/SoapySDR/Types.h:51:5:
> > > > error:
> > > > >> redeclaration of
> > > > >> > > enumerator
> > > > >> > > >
> > > > ‘SOAPY_SDR_ARG_INFO_INT’
> > > > >> > > >
> > > > SOAPY_SDR_ARG_INFO_INT,
> > > > >> > > > ^
> > > > >> > > > In file
> > > included from
> > > > >> >
> > > > >>
> > > > /usr/local/include/SoapySDR/Device.h:18:0,
> > > > >> > > >
> > > from
> > > > >> > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
> > > > >> > > >
> > > > >>
> > > /usr/local/include/SoapySDR/Types.h:51:5:
> > > > >> note: previous
> > > > >> > >
> definition of
> > > > >> > > >
> > > > ‘SOAPY_SDR_ARG_INFO_INT’
> > > > >> was here
> > > > >> > > >
> > > > SOAPY_SDR_ARG_INFO_INT,
> > > > >> > > > ^
> > > > >> > > > In file
> > > included from
> > > > >> > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
> > > > >> > > >
> > > > >>
> > /usr/include/SoapySDR/Types.h:52:5:
> > > > error:
> > > > >> redeclaration of
> > > > >> > > enumerator
> > > > >> > > >
> > > > ‘SOAPY_SDR_ARG_INFO_FLOAT’
> > > > >> > > >
> > > > >> SOAPY_SDR_ARG_INFO_FLOAT,
> > > > >> > > > ^
> > > > >> > > > In file
> > > included from
> > > > >> >
> > > > >>
> > > > /usr/local/include/SoapySDR/Device.h:18:0,
> > > > >> > > >
> > > from
> > > > >> > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
> > > > >> > > >
> > > > >>
> > > /usr/local/include/SoapySDR/Types.h:52:5:
> > > > >> note: previous
> > > > >> > >
> definition of
> > > > >> > > >
> > > > >>
> > ‘SOAPY_SDR_ARG_INFO_FLOAT’ was here
> > > > >> > > >
> > > > >> SOAPY_SDR_ARG_INFO_FLOAT,
> > > > >> > > > ^
> > > > >> > > > In file
> > > included from
> > > > >> > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
> > > > >> > > >
> > > > >>
> > /usr/include/SoapySDR/Types.h:53:5:
> > > > error:
> > > > >> redeclaration of
> > > > >> > > enumerator
> > > > >> > > >
> > > > ‘SOAPY_SDR_ARG_INFO_STRING’
> > > > >> > > >
> > > > >> SOAPY_SDR_ARG_INFO_STRING
> > > > >> > > > ^
> > > > >> > > > In file
> > > included from
> > > > >> >
> > > > >>
> > > > /usr/local/include/SoapySDR/Device.h:18:0,
> > > > >> > > >
> > > from
> > > > >> > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
> > > > >> > > >
> > > > >>
> > > /usr/local/include/SoapySDR/Types.h:53:5:
> > > > >> note: previous
> > > > >> > >
> definition of
> > > > >> > > >
> > > > >>
> > ‘SOAPY_SDR_ARG_INFO_STRING’ was
> > > here
> > > > >> > > >
> > > > >> SOAPY_SDR_ARG_INFO_STRING
> > > > >> > > > ^
> > > > >> > > > In file
> > > included from
> > > > >> > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
> > > > >> > > >
> > > > >>
> > /usr/include/SoapySDR/Types.h:54:3:
> > > > error:
> > > > >> conflicting
> > > > >> > types for
> > > > >> > > >
> > > ‘SoapySDRArgInfoType’
> > > > >> > > > }
> > > SoapySDRArgInfoType;
> > > > >> > > > ^
> > > > >> > > > In file
> > > included from
> > > > >> >
> > > > >>
> > > > /usr/local/include/SoapySDR/Device.h:18:0,
> > > > >> > > >
> > > from
> > > > >> > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
> > > > >> > > >
> > > > >>
> > > /usr/local/include/SoapySDR/Types.h:54:3:
> > > > >> note: previous
> > > > >> > >
> > declaration of
> > > > >> > > >
> > > ‘SoapySDRArgInfoType’
> > > > >> was here
> > > > >> > > > }
> > > SoapySDRArgInfoType;
> > > > >> > > > ^
> > > > >> > > > In file
> > > included from
> > > > >> > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
> > > > >> > > >
> > > > >>
> > > /usr/include/SoapySDR/Types.h:103:3:
> > > > >> error: conflicting
> > > > >> > types for
> > > > >> > > >
> > ‘SoapySDRArgInfo’
> > > > >> > > > }
> > > SoapySDRArgInfo;
> > > > >> > > > ^
> > > > >> > > > In file
> > > included from
> > > > >> >
> > > > >>
> > > > /usr/local/include/SoapySDR/Device.h:18:0,
> > > > >> > > >
> > > from
> > > > >> > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
> > > > >> > > >
> > > > >>
> > > > /usr/local/include/SoapySDR/Types.h:103:3:
> > > > >> note: previous
> > > > >> > >
> > declaration of
> > > > >> > > >
> > ‘SoapySDRArgInfo’
> > > > was here
> > > > >> > > > }
> > > SoapySDRArgInfo;
> > > > >> > > > ^
> > > > >> > > > In file
> > > included from
> > > > >> > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
> > > > >> > > >
> > > > >>
> > > /usr/include/SoapySDR/Types.h:114:20:
> > > > >> error: conflicting
> > > > >> > types for
> > > > >> > > >
> > > ‘SoapySDRKwargs_set’
> > > > >> > > >
> > > SOAPY_SDR_API void
> > > > >>
> > > SoapySDRKwargs_set(SoapySDRKwargs *args,
> > > > >> > > const char
> > > > >> > > > *key, co
> > > > >> > > >
> > > ^
> > > > >> > > > In file
> > > included from
> > > > >> >
> > > > >>
> > > > /usr/local/include/SoapySDR/Device.h:18:0,
> > > > >> > > >
> > > from
> > > > >> > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
> > > > >> > > >
> > > > >>
> > > > /usr/local/include/SoapySDR/Types.h:120:19: note:
> > > > >> previous
> > > > >> > >
> declaration
> > > > >> > > > of
> > > ‘SoapySDRKwargs_set’
> > > > >> was here
> > > > >> > > >
> > > SOAPY_SDR_API int
> > > > >>
> > > SoapySDRKwargs_set(SoapySDRKwargs *args,
> > > > >> > > const char
> > > > >> > > > *key,
> con
> > > > >> > > >
> > > ^
> > > > >> > > > In file
> > > included from
> > > > >> > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
> > > > >> > > >
> > > > >>
> > > /usr/include/SoapySDR/Types.h:120:27:
> > > > >> error: conflicting
> > > > >> > types for
> > > > >> > > >
> > > ‘SoapySDRKwargs_get’
> > > > >> > > >
> > > SOAPY_SDR_API const
> > > > >> char
> > > *SoapySDRKwargs_get(SoapySDRKwargs
> > > > >> > > *args,
> > > > >> > > > const
> > char *
> > > > >> > > >
> > > > ^
> > > > >> > > > In file
> > > included from
> > > > >> >
> > > > >>
> > > > /usr/local/include/SoapySDR/Device.h:18:0,
> > > > >> > > >
> > > from
> > > > >> > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
> > > > >> > > >
> > > > >>
> > > > /usr/local/include/SoapySDR/Types.h:126:27: note:
> > > > >> previous
> > > > >> > >
> declaration
> > > > >> > > > of
> > > ‘SoapySDRKwargs_get’
> > > > >> was here
> > > > >> > > >
> > > SOAPY_SDR_API const
> > > > >> char
> > *SoapySDRKwargs_get(const
> > > > >> > SoapySDRKwargs
> > > > >> > > > *args,
> > const
> > > > >> > > >
> > > > ^
> > > > >> > > > In file
> > > included from
> > > > >> > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
> > > > >> > > >
> > > > >>
> > > /usr/include/SoapySDR/Types.h:126:20:
> > > > >> error: conflicting
> > > > >> > types for
> > > > >> > > >
> > > ‘SoapySDRKwargs_clear’
> > > > >> > > >
> > > SOAPY_SDR_API void
> > > > >>
> > SoapySDRKwargs_clear(SoapySDRKwargs
> > > > >> > *args);
> > > > >> > > >
> > > ^
> > > > >> > > > In file
> > > included from
> > > > >> >
> > > > >>
> > > > /usr/local/include/SoapySDR/Device.h:18:0,
> > > > >> > > >
> > > from
> > > > >> > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
> > > > >> > > >
> > > > >>
> > > > /usr/local/include/SoapySDR/Types.h:132:20: note:
> > > > >> previous
> > > > >> > >
> declaration
> > > > >> > > > of
> > > > >> ‘SoapySDRKwargs_clear’
> > was here
> > > > >> > > >
> > > SOAPY_SDR_API void
> > > > >>
> > SoapySDRKwargs_clear(SoapySDRKwargs
> > > > >> > *args);
> > > > >> > > >
> > > ^
> > > > >> > > > In file
> > > included from
> > > > >> > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
> > > > >> > > >
> > > > >>
> > > /usr/include/SoapySDR/Types.h:132:20:
> > > > >> error: conflicting
> > > > >> > types for
> > > > >> > > >
> > > > ‘SoapySDRKwargsList_clear’
> > > > >> > > >
> > > SOAPY_SDR_API void
> > > > >>
> > > SoapySDRKwargsList_clear(SoapySDRKwargs
> > > > >> > > *args,
> const
> > > > >> > > > size_t
> > > > >> > > >
> > > ^
> > > > >> > > > In file
> > > included from
> > > > >> >
> > > > >>
> > > > /usr/local/include/SoapySDR/Device.h:18:0,
> > > > >> > > >
> > > from
> > > > >> > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
> > > > >> > > >
> > > > >>
> > > > /usr/local/include/SoapySDR/Types.h:138:20: note:
> > > > >> previous
> > > > >> > >
> declaration
> > > > >> > > > of
> > > > >>
> > ‘SoapySDRKwargsList_clear’ was here
> > > > >> > > >
> > > SOAPY_SDR_API void
> > > > >>
> > > SoapySDRKwargsList_clear(SoapySDRKwargs
> > > > >> > > *args,
> const
> > > > >> > > > size_t
> > > > >> > > >
> > > ^
> > > > >> > > > In file
> > > included from
> > > > >> > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
> > > > >> > > >
> > > > >>
> > > /usr/include/SoapySDR/Types.h:138:20:
> > > > >> error: conflicting
> > > > >> > types for
> > > > >> > > >
> > > ‘SoapySDRArgInfo_clear’
> > > > >> > > >
> > > SOAPY_SDR_API void
> > > > >> >
> > > > >>
> > > > SoapySDRArgInfo_clear(SoapySDRArgInfo *info);
> > > > >> > > >
> > > ^
> > > > >> > > > In file
> > > included from
> > > > >> >
> > > > >>
> > > > /usr/local/include/SoapySDR/Device.h:18:0,
> > > > >> > > >
> > > from
> > > > >> > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
> > > > >> > > >
> > > > >>
> > > > /usr/local/include/SoapySDR/Types.h:144:20: note:
> > > > >> previous
> > > > >> > >
> declaration
> > > > >> > > > of
> > > > >> ‘SoapySDRArgInfo_clear’
> > was here
> > > > >> > > >
> > > SOAPY_SDR_API void
> > > > >> >
> > > > >>
> > > > SoapySDRArgInfo_clear(SoapySDRArgInfo *info);
> > > > >> > > >
> > > ^
> > > > >> > > > In file
> > > included from
> > > > >> > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
> > > > >> > > >
> > > > >>
> > > /usr/include/SoapySDR/Types.h:144:20:
> > > > >> error: conflicting
> > > > >> > types for
> > > > >> > > >
> > > > ‘SoapySDRArgInfoList_clear’
> > > > >> > > >
> > > SOAPY_SDR_API void
> > > > >> >
> > > > >>
> > > > SoapySDRArgInfoList_clear(SoapySDRArgInfo
> > > > >> > > *info,
> > > > >> > > > const
> size_
> > > > >> > > >
> > > ^
> > > > >> > > > In file
> > > included from
> > > > >> >
> > > > >>
> > > > /usr/local/include/SoapySDR/Device.h:18:0,
> > > > >> > > >
> > > from
> > > > >> > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
> > > > >> > > >
> > > > >>
> > > > /usr/local/include/SoapySDR/Types.h:150:20: note:
> > > > >> previous
> > > > >> > >
> declaration
> > > > >> > > > of
> > > > >>
> > ‘SoapySDRArgInfoList_clear’ was
> > > here
> > > > >> > > >
> > > SOAPY_SDR_API void
> > > > >> >
> > > > >>
> > > > SoapySDRArgInfoList_clear(SoapySDRArgInfo
> > > > >> > > *info,
> > > > >> > > > const
> size_
> > > > >> > > >
> > > ^
> > > > >> > > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:
> > > > >> In function
> > > > >> > > >
> > > ‘rf_soapy_open_multi’:
> > > > >> > > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:296:38:
> > > > >> > error:
> > > > >> > > >
> > > initialization from
> > > > >> incompatible pointer type
> > > > >> > > >
> > > > >>
> > > [-Werror=incompatible-pointer-types]
> > > > >> > > > const
> > > SoapySDRKwargs
> > > > >> *soapy_args =
> > > > >> > >
> > > > SoapySDRDevice_enumerate(NULL,
> > > > >> > > >
> &length);
> > > > >> > > >
> > > > >>
> > > ^
> > > > >> > > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:316:45:
> > > > >> > error:
> > > > >> > > passing
> > > > >> > > >
> > argument 1 of
> > > > >> ‘SoapySDRDevice_make’ from
> > > incompatible
> > > > >> > pointer type
> > > > >> > > >
> > > > >>
> > > [-Werror=incompatible-pointer-types]
> > > > >> > > >
> > SoapySDRDevice
> > > > *sdr =
> > > > >> >
> > > > SoapySDRDevice_make(&(soapy_args[0]));
> > > > >> > > >
> > > > >>
> > > > ^
> > > > >> > > > In file
> > > included from
> > > > >> > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:0:
> > > > >> > > >
> > > > >>
> > > > /usr/local/include/SoapySDR/Device.h:78:31: note:
> > > > >> > expected ‘const
> > > > >> > > >
> > > SoapySDRKwargs * {aka
> > > > >> const struct <anonymous>
> > *}’ but
> > > > >> > > argument
> > is of
> > > > >> > > > type
> ‘const
> > > > >> SoapySDRKwargs * {aka
> > const struct
> > > > >> > <anonymous> *}’
> > > > >> > > >
> > SOAPY_SDR_API
> > > > >> SoapySDRDevice
> > > *SoapySDRDevice_make(const
> > > > >> > >
> > SoapySDRKwargs
> > > > >> > > > *args);
> > > > >> > > >
> > > > >>
> > ^
> > > > >> > > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:380:28:
> > > > >> > error:
> > > > >> > > invalid
> > > > >> > > >
> initializer
> > > > >> > > >
> > SoapySDRRange
> > > > tx_range =
> > > > >> > >
> > > > >>
> > > > SoapySDRDevice_getGainRange(handler->device,
> > > > >> > > > SOAPY_S
> > > > >> > >�� >
> > > > >>
> ^
> > > > >> > > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:381:28:
> > > > >> > error:
> > > > >> > > invalid
> > > > >> > > >
> initializer
> > > > >> > > >
> > SoapySDRRange
> > > > rx_range =
> > > > >> > >
> > > > >>
> > > > SoapySDRDevice_getGainRange(handler->device,
> > > > >> > > > SOAPY_S
> > > > >> > > >
> > > > >>
> ^
> > > > >> > > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:
> > > > >> In function
> > > > >> > > >
> > > > ‘rf_soapy_set_rx_srate’:
> > > > >> > > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:581:29:
> > > > >> > error:
> > > > >> > > >
> > > initialization from
> > > > >> incompatible pointer type
> > > > >> > > >
> > > > >>
> > > [-Werror=incompatible-pointer-types]
> > > > >> > > >
> > SoapySDRRange
> > > > *bw_range =
> > > > >> > > >
> > > > >>
> > > > SoapySDRDevice_getBandwidthRange(handler->device,
> > > > >> S
> > > > >> > > >
> > > > >>
> > ^
> > > > >> > > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:
> > > > >> In function
> > > > >> > > >
> > > > ‘rf_soapy_set_tx_srate’:
> > > > >> > > >
> > > > >>
> > > > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:617:29:
> > > > >> > error:
> > > > >> > > >
> > > initialization from
> > > > >> incompatible pointer type
> > > > >> > > >
> > > > >>
> > > [-Werror=incompatible-pointer-types]
> > > > >> > > >
> > SoapySDRRange
> > > > *bw_range =
> > > > >> > > >
> > > > >>
> > > > SoapySDRDevice_getBandwidthRange(handler->device,
> > > > >> S
> > > > >> > > >
> > > > >>
> > ^
> > > > >> > > > cc1:
> some
> > > warnings
> > > > being
> > > > >> treated as errors
> > > > >> > > >
> > > > >>
> > > > lib/src/phy/rf/CMakeFiles/srslte_rf.dir/build.make:134:
> > > > >> > recipe for
> > > > >> > > > target
> > > > >> > >
> > > > >>
> > > >
> 'lib/src/phy/rf/CMakeFiles/srslte_rf.dir/rf_soapy_imp.c.o'
> > > > >> > failed
> > > > >> > > >
> > make[2]: ***
> > > > >> > >
> > > > >>
> > > >
> [lib/src/phy/rf/CMakeFiles/srslte_rf.dir/rf_soapy_imp.c.o]
> > > > >> > > > Error 1
> > > > >> > > >
> > > > >> CMakeFiles/Makefile2:2905:
> > > recipe for
> > > > target
> > > > >> > > >
> > > > >>
> > > > 'lib/src/phy/rf/CMakeFiles/srslte_rf.dir/all'
> > > > >> failed
> > > > >> > > >
> > make[1]: ***
> > > > >> >
> > > > >>
> > > > [lib/src/phy/rf/CMakeFiles/srslte_rf.dir/all]
> > > > >> Error 2
> > > > >> > > >
> > Makefile:160:
> > > > recipe for
> > > > >> target 'all' failed
> > > > >> > > > make:
> ***
> > > [all] Error 2
> > > > >> > > >
> > > > >> > > >
> > > > >> > > > Please
> > > advise! Thanks
> > > > >> > > > --
> > > > >> > > > Best
> > Regards,
> > > > >> > > > DUO
> > > > >> > > >
> > > > >> > > >
> > > > >> > > >
> > > > >>
> > > > _______________________________________________
> > > > >> > > >
> > srslte-users
> > > > mailing list
> > > > >> > > >
> > > > >>
> > > > srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>
> > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>>
> > > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>
> > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>>>
> > > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>
> > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>>
> > > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>
> > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>>>>
> > > > >> >
> > > > >>
> > > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>
> > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>>
> > > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>
> > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>>>
> > > > >>
> > > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>
> > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>>
> > > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>
> > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>>>>>
> > > > >> > >
> > > > >>
> > > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>
> > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>>
> > > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>
> > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>>>
> > > > >>
> > > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>
> > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>>
> > > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>
> > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>>>>
> > > > >> >
> > > > >>
> > > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>
> > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>>
> > > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>
> > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>>>
> > > > >>
> > > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>
> > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>>
> > > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>
> > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>>>>>>
> > > > >> > > >
> > > > >> >
> > > > >>
> > > >
> > >
> >
> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
> > > > >> > > >
> > > > >> > >
> > > > >> > >
> > > > >> > >
> > > > >> > > --
> > > > >> > > Best Regards,
> > > > >> > > Sandi
> > > > >> > >
> > > > >> > >
> > > > >> > >
> > > > >> > > --
> > > > >> > > Best Regards,
> > > > >> > > Sandi
> > > > >> > >
> > > > >> >
> > > > >> >
> > > > >> > --
> > > > >> > Andre Puschmann
> > > > >> >
> > > > >> > Software Radio
> > Systems (SRS)
> > > > >> >
> > > http://www.softwareradiosystems.com
> > > > >> >
> > > > >> > PGP/GnuPG key:
> 6C42AB31
> > > > >> > fingerprint: 137A
> AE49
> > > 785B A445
> > > > >> 257C 8AD7 D877 A498 6C42
> AB31
> > > > >> >
> > > > >> >
> > > > >> >
> > > > >> > --
> > > > >> > Best Regards,
> > > > >> > Sandi
> > > > >> >
> > > > >>
> > > > >>
> > > > >> --
> > > > >> Andre Puschmann
> > > > >>
> > > > >> Software Radio Systems
> (SRS)
> > > > >>
> > http://www.softwareradiosystems.com
> > > > >>
> > > > >> PGP/GnuPG key: 6C42AB31
> > > > >> fingerprint: 137A AE49
> 785B
> > > A445 257C
> > > > 8AD7
> > > > >> D877 A498 6C42 AB31
> > > > >>
> > > > >>
> > > > >>
> > > > >> --
> > > > >> Best Regards,
> > > > >> Sandi
> > > > >>
> > > > >>
> > > > >>
> > > > >> --
> > > > >> Best Regards,
> > > > >> Sandi
> > > > >>
> > > > >>
> > > > >>
> > > _______________________________________________
> > > > >> srslte-users mailing list
> > > > >>
> > > srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>
> > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>>
> > > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>
> > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>>>
> > > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>
> > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>>
> > > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>
> > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>>>>
> > > > >>
> > > >
> > http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
> > > > >
> > > _______________________________________________
> > > > > srslte-users mailing list
> > > > >
> > > srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>
> > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>>
> > > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>
> > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>>>
> > > > >
> > > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>
> > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>>
> > > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>
> > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>>>>
> > > > >
> > > >
> > http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Best Regards,
> > > > > Sandi
> > > > >
> > > > >
> > _______________________________________________
> > > > > srslte-users mailing list
> > > > >
> > srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>
> > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>>
> > > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>
> > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>>>
> > > > >
> > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>
> > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>>
> > > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>
> > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>>>>
> > > > >
> > > >
> > http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > srslte-users mailing list
> > > > > srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>
> > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>>
> > > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>
> > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>>>
> > > > >
> > >
> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
> > > > >
> > > >
> > > >
> > > >
> > > > --
> > > > Best Regards,
> > > > Sandi
> > > >
> > > >
> > > > _______________________________________________
> > > > srslte-users mailing list
> > > > srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>
> > > <mailto:srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>>
> > > >
> > http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
> > > >
> > >
> > >
> > > --
> > > Andre Puschmann
> > >
> > > Software Radio Systems (SRS)
> > > http://www.softwareradiosystems.com
> > >
> > > PGP/GnuPG key: 6C42AB31
> > > fingerprint: 137A AE49 785B A445 257C 8AD7 D877 A498 6C42 AB31
> > >
> > >
> > >
> > > --
> > > Best Regards,
> > > Sandi
> > >
> >
> >
> > --
> > Andre Puschmann
> >
> > Software Radio Systems (SRS)
> > http://www.softwareradiosystems.com
> >
> > PGP/GnuPG key: 6C42AB31
> > fingerprint: 137A AE49 785B A445 257C 8AD7 D877 A498 6C42 AB31
> >
> >
> >
> > --
> > Best Regards,
> > Sandi
> >
>
>
> --
> Andre Puschmann
>
> Software Radio Systems (SRS)
> http://www.softwareradiosystems.com
>
> PGP/GnuPG key: 6C42AB31
> fingerprint: 137A AE49 785B A445 257C 8AD7 D877 A498 6C42 AB31
>
--
Best Regards,
Sandi
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20181109/8d223b0e/attachment.htm>
More information about the srsran-users
mailing list