[srslte-users] Need help build error when make on srsLTE with LimeSDR
Sandi Suhendro
djks74 at gmail.com
Fri Nov 9 19:17:29 UTC 2018
Hi Andre,
tried with other phone is fine, seems it has problem with some phone and
causing crash.
Now I try to connect to internet with other phone, still confuse how to :-)
try follow this http://nextepc.org/guides/3-configuration/
will continue on next monday.
please advise a good configuration to connect to internet if you can give
me some hints :-) NextEPC with srsenb.
Thanks,
Sandi
On Fri, Nov 9, 2018 at 11:58 PM Sandi Suhendro <djks74 at gmail.com> wrote:
> ok will try with other phone.
>
> Thanks Andre.
>
> Sandi
>
> On Fri, Nov 9, 2018 at 11:56 PM Andre Puschmann <
> andre.puschmann at softwareradiosystems.com> wrote:
>
>> Hey Sandi,
>>
>> On 9/11/18 17:52, Sandi Suhendro wrote:
>> > Dear Andre,
>> > do you think cause of LNAH test failed, make this error happen? but it
>> > wont connect the UE if dont want to connect.
>>
>> No. That doesn't cause the error. We'll look into it from our side. If
>> possible, try to test with another phone.
>>
>> Thanks
>> Andre
>>
>>
>>
>> >
>> > is there a way in the source code I can set Antenna to LNAW? cannot find
>> > where to change the setting antenna on srsLTE source code.
>> > Im using earfcn 1600 anyway on 1845mhz to test.
>> >
>> > here is the LimeQuicktest :
>> >
>> > [ RF Loopback Test ]
>> > ->Configure LMS
>> > ->Run Tests (TX_2-> LNA_L):
>> > CH0 (SXR=800.0MHz, SXT=805.0MHz): Result:(-14.3 dBFS, 5.00 MHz) -
>> PASSED
>> > CH1 (SXR=800.0MHz, SXT=805.0MHz): Result:(-16.1 dBFS, 5.00 MHz) -
>> PASSED
>> > ->Run Tests (TX_1 -> LNA_W):
>> > CH0 (SXR=1800.0MHz, SXT=1805.0MHz): Result:(-18.4 dBFS, 5.00 MHz) -
>> PASSED
>> > CH1 (SXR=1800.0MHz, SXT=1805.0MHz): Result:(-20.0 dBFS, 5.00 MHz) -
>> PASSED
>> > ->Run Tests (TX_2-> LNA_H):
>> > CH0 (SXR=2500.0MHz, SXT=2505.0MHz): Result:(-66.1 dBFS, 5.00 MHz) -
>> FAILED
>> > CH1 (SXR=2500.0MHz, SXT=2505.0MHz): Result:(-15.0 dBFS, 5.00 MHz) -
>> PASSED
>> > ->RF Loopback Test FAILED
>> >
>> > => Board tests FAILED <=
>> >
>> >
>> > regards,
>> > Sandi
>> >
>> > On Fri, Nov 9, 2018 at 11:47 PM Sandi Suhendro <djks74 at gmail.com
>> > <mailto:djks74 at gmail.com>> wrote:
>> >
>> > here it is :
>> >
>> > (gdb) bt
>> > #0 0x00000000004b7c7e in
>> >
>> srsenb::rrc::ue::send_connection_reconf_new_bearer(LIBLTE_S1AP_E_RABTOBESETUPLISTBEARERSUREQ_STRUCT*)
>> > ()
>> > #1 0x00000000004b8096 in
>> >
>> srsenb::rrc::ue::setup_erabs(LIBLTE_S1AP_E_RABTOBESETUPLISTBEARERSUREQ_STRUCT*)
>> > ()
>> > #2 0x00000000004ba155 in srsenb::rrc::setup_ue_erabs(unsigned
>> > short, LIBLTE_S1AP_MESSAGE_E_RABSETUPREQUEST_STRUCT*) ()
>> > #3 0x00000000004ac9f3 in
>> >
>> srsenb::s1ap::handle_erabsetuprequest(LIBLTE_S1AP_MESSAGE_E_RABSETUPREQUEST_STRUCT*)
>> > ()
>> > #4 0x00000000004b0a8d in
>> > srsenb::s1ap::handle_s1ap_rx_pdu(srslte::byte_buffer_t*) ()
>> > #5 0x00000000004b0ca5 in srsenb::s1ap::run_thread() ()
>> > #6 0x00000000004aae89 in thread::thread_function_entry(void*) ()
>> > #7 0x00007ffff7bc16ba in start_thread (arg=0x7fffc6cfb700)
>> > at pthread_create.c:333
>> > #8 0x00007ffff60db41d in clone ()
>> > at ../sysdeps/unix/sysv/linux/x86_64/clone.S:109
>> > (gdb) p e
>> > $1 = {i = {0, 1127522290}, d = 5805361265115136}
>> > (gdb)
>> >
>> >
>> > best,
>> > Sandi
>> >
>> > On Fri, Nov 9, 2018 at 11:45 PM Andre Puschmann
>> > <andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>> wrote:
>> >
>> > Now type "bt"+Enter and then "p e"+Enter and send the output
>> >
>> >
>> > On 9/11/18 17:42, Sandi Suhendro wrote:
>> > > Dear Andre,
>> > > yes it crash, but the crash happen until I turn on the data in
>> > my phone.
>> > >
>> > > Here is the GDB trace :
>> > >
>> > > (gdb) run
>> > > Starting program: /usr/local/bin/srsenb
>> > > [Thread debugging using libthread_db enabled]
>> > > Using host libthread_db library
>> > "/lib/x86_64-linux-gnu/libthread_db.so.1".
>> > > [New Thread 0x7fffee667700 (LWP 7892)]
>> > > [New Thread 0x7fffede66700 (LWP 7893)]
>> > >
>> > > Built in Release mode using commit 1c015aab on branch master.
>> > >
>> > > --- Software Radio Systems LTE eNodeB ---
>> > >
>> > > Reading configuration file /home/duo/.srs/enb.conf...
>> > > Error: could not create log file, no messages will be logged!
>> > > [New Thread 0x7fffed665700 (LWP 7894)]
>> > > Failed to open file "/tmp/enb.pcap" for writing
>> > > linux; GNU C++ version 5.4.0 20160609; Boost_105800;
>> > > UHD_003.010.002.HEAD-0-gbd6e21dc
>> > >
>> > > [New Thread 0x7fffe867b700 (LWP 7895)]
>> > > [New Thread 0x7fffe7e7a700 (LWP 7896)]
>> > > [Thread 0x7fffe7e7a700 (LWP 7896) exited]
>> > > [New Thread 0x7fffe7679700 (LWP 7897)]
>> > > [New Thread 0x7fffe6e78700 (LWP 7898)]
>> > > [New Thread 0x7fffe6677700 (LWP 7899)]
>> > > [New Thread 0x7fffe5e76700 (LWP 7900)]
>> > > [New Thread 0x7fffe5675700 (LWP 7901)]
>> > > [Thread 0x7fffe867b700 (LWP 7895) exited]
>> > > [Thread 0x7fffe5e76700 (LWP 7900) exited]
>> > > [New Thread 0x7fffe5e76700 (LWP 7902)]
>> > > [Thread 0x7fffe5e76700 (LWP 7902) exited]
>> > > [New Thread 0x7fffe5e76700 (LWP 7903)]
>> > > [Thread 0x7fffe5e76700 (LWP 7903) exited]
>> > > Soapy has found device #0: addr=1d50:6108, driver=lime,
>> > > label=LimeSDR-USB [USB 3.0] 9061C02C73125, media=USB 3.0,
>> > module=FX3,
>> > > name=LimeSDR-USB, serial=0009061C02C73125,
>> > > [Thread 0x7fffe7679700 (LWP 7897) exited]
>> > > [INFO] Make connection: 'LimeSDR-USB [USB 3.0] 9061C02C73125'
>> > > [INFO] Reference clock 30.72 MHz
>> > > [INFO] Device name: LimeSDR-USB
>> > > [INFO] Reference: 30.72 MHz
>> > > [INFO] LMS7002M calibration values caching Disable
>> > > [INFO] RX LPF configured
>> > > Set Rx bandwidth to 2.50 MHz
>> > > [INFO] Filter calibrated. Filter order-4th, filter bandwidth
>> > set to 5
>> > > MHz.Real pole 1st order filter set to 2.5 MHz. Preemphasis
>> > filter not active
>> > > [INFO] TX LPF configured
>> > > Set Tx bandwidth to 5.00 MHz
>> > > Setting up RX stream
>> > > Setting up TX stream
>> > > Available device sensors:
>> > > - clock_locked
>> > > - lms7_temp
>> > > Available sensors for RX channel 0:
>> > > - lo_locked
>> > > [INFO] Tx calibration finished
>> > > [INFO] Rx calibration finished
>> > > [New Thread 0x7fffe7679700 (LWP 7904)]
>> > > [Thread 0x7fffe7679700 (LWP 7904) exited]
>> > > State of gain elements for Rx channel 0 (AGC not supported):
>> > > - TIA: 9.00 dB
>> > > - LNA: 30.00 dB
>> > > - PGA: -4.00 dB
>> > > State of gain elements for Tx channel 0 (AGC not supported):
>> > > - TIA: 9.00 dB
>> > > - LNA: 30.00 dB
>> > > - PGA: -4.00 dB
>> > > Rx antenna set to LNAH
>> > > Tx antenna set to BAND1
>> > > [New Thread 0x7fffe7679700 (LWP 7905)]
>> > >
>> > > Warning burst preamble is not calibrated for device lime. Set
>> > a value
>> > > manually
>> > >
>> > > Setting frequency: DL=1845.0 Mhz, UL=1750.0 MHz
>> > > Tuned Tx to 1845.00 MHz
>> > > Tuned Rx to 1750.00 MHz
>> > > [New Thread 0x7fffe5e76700 (LWP 7906)]
>> > > Warning: Failed to create thread with real-time priority.
>> > Creating it
>> > > with normal priority: Cannot allocate memory
>> > > [New Thread 0x7fffe7e7a700 (LWP 7907)]
>> > > [Thread 0x7fffe5e76700 (LWP 7906) exited]
>> > > [New Thread 0x7fffe867b700 (LWP 7908)]
>> > > Warning: Failed to create thread with real-time priority.
>> > Creating it
>> > > with normal priority: Cannot allocate memory
>> > > [New Thread 0x7fffca502700 (LWP 7909)]
>> > > [Thread 0x7fffe867b700 (LWP 7908) exited]
>> > > [New Thread 0x7fffc9d01700 (LWP 7910)]
>> > > Warning: Failed to create thread with real-time priority.
>> > Creating it
>> > > with normal priority: Cannot allocate memory
>> > > [New Thread 0x7fffc9500700 (LWP 7911)]
>> > > [Thread 0x7fffc9d01700 (LWP 7910) exited]
>> > > [New Thread 0x7fffc8cff700 (LWP 7912)]
>> > > Warning: Failed to create thread with real-time priority.
>> > Creating it
>> > > with normal priority: Cannot allocate memory
>> > > [New Thread 0x7fffc84fe700 (LWP 7913)]
>> > > [Thread 0x7fffc8cff700 (LWP 7912) exited]
>> > > [New Thread 0x7fffc7cfd700 (LWP 7914)]
>> > > [New Thread 0x7fffc74fc700 (LWP 7915)]
>> > > [New Thread 0x7fffc6cfb700 (LWP 7916)]
>> > > [New Thread 0x7fffc64fa700 (LWP 7917)]
>> > > [New Thread 0x7fffc5cf9700 (LWP 7918)]
>> > > [New Thread 0x7fffc54f8700 (LWP 7919)]
>> > > Set master clock rate to 15.36 MHz
>> > > Setting Sampling frequency 3.84 MHz
>> > > [INFO] RX LPF configured
>> > > Set Rx bandwidth to 2.88 MHz
>> > > [INFO] Filter calibrated. Filter order-4th, filter bandwidth
>> > set to 5
>> > > MHz.Real pole 1st order filter set to 2.5 MHz. Preemphasis
>> > filter not active
>> > > [INFO] TX LPF configured
>> > > Set Tx bandwidth to 5.00 MHz
>> > > Setting manual TX/RX offset to 72 samples
>> > >
>> > > ==== eNodeB started ===
>> > > Type <t> to view trace
>> > > [INFO] Tx calibration finished
>> > > [INFO] Rx calibration finished
>> > > [New Thread 0x7fffc4cf7700 (LWP 7920)]
>> > > [New Thread 0x7fffb7fff700 (LWP 7921)]
>> > > [WARNING] L
>> > > RACH: tti=6381, preamble=29, offset=3, temp_crnti=0x46
>> > > Error: Can't write to empty file handle
>> > > Error: Can't write to empty file handle
>> > > Error: Can't write to empty file handle
>> > > Error: Can't write to empty file handle
>> > > Error: Can't write to empty file handle
>> > > Error: Can't write to empty file handle
>> > > Error: Can't write to empty file handle
>> > > Error: Can't write to empty file handle
>> > > Error: Can't write to empty file handle
>> > > Error: Can't write to empty file handle
>> > > Error: Can't write to empty file handle
>> > > Error: Can't write to empty file handle
>> > > Error: Can't write to empty file handle
>> > > Error: Can't write to empty file handle
>> > > Error: Can't write to empty file handle
>> > > Error: Can't write to empty file handle
>> > > [WARNING] L
>> > > Error: Can't write to empty file handle
>> > > Error: Can't write to empty file handle
>> > > Error: Can't write to empty file handle
>> > > User 0x46 connected
>> > > Error: Can't write to empty file handle
>> > > Error: Can't write to empty file handle
>> > > Error: Can't write to empty file handle
>> > > Error: Can't write to empty file handle
>> > > Error: Can't write to empty file handle
>> > > Error: Can't write to empty file handle
>> > > Error: Can't write to empty file handle
>> > > Error: Can't write to empty file handle
>> > > Error: Can't write to empty file handle
>> > > [WARNING] L
>> > > Error: Can't write to empty file handle
>> > > Error: Can't write to empty file handle
>> > >
>> > > Thread 26 "srsenb" received signal SIGBUS, Bus error.
>> > > [Switching to Thread 0x7fffc6cfb700 (LWP 7916)]
>> > > 0x00000000004b7c7e in
>> > >
>> >
>> srsenb::rrc::ue::send_connection_reconf_new_bearer(LIBLTE_S1AP_E_RABTOBESETUPLISTBEARERSUREQ_STRUCT*)
>> > > ()
>> > > (gdb)
>> > >
>> > > the enb.log same as attached.
>> > >
>> > >
>> > > On Fri, Nov 9, 2018 at 11:34 PM Andre Puschmann
>> > > <andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>> wrote:
>> > >
>> > > Hey,
>> > >
>> > > what do you mean by "stop by it self"? Does it crash? If
>> > so, send the
>> > > backtrace file that is generated. You can also try to run
>> > the eNB in gdb
>> > > with "gdb --args srsenb".
>> > >
>> > > Thanks
>> > > Andre
>> > >
>> > > On 9/11/18 17:24, Sandi Suhendro wrote:
>> > > > Hi Andre,
>> > > > I set it to enable but its empty on tmp, thats why I
>> > create from
>> > > wireshark.
>> > > > also, I cannot close enb cause it stop by it self when
>> > turn on the
>> > > data.
>> > > >
>> > > > here we go again the file attached.
>> > > >
>> > > > best,
>> > > > Sandi
>> > > >
>> > > > On Fri, Nov 9, 2018 at 11:15 PM Andre Puschmann
>> > > > <andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>
>> > > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>>> wrote:
>> > > >
>> > > > Hey,
>> > > >
>> > > > the enb.log is corrupted at the end (i.e. not all is
>> > written
>> > > to the
>> > > > file). Can you rerun and close the eNB properly so
>> > it will
>> > > write the
>> > > > entire logs? Also, please capture eNB PCAP by either
>> > turning
>> > > PCAP on in
>> > > > the config for appending --pcap.enable=true on the
>> > command line.
>> > > >
>> > > > Thanks
>> > > > Andre
>> > > >
>> > > >
>> > > > On 9/11/18 16:56, Sandi Suhendro wrote:
>> > > > > Dear Andre,
>> > > > > here is the pcap and enb.log attached.
>> > > > >
>> > > > > the connection is drop when I turn on the data.
>> > > > > and here is the srsenb log on the terminal :
>> > > > >
>> > > > > <<<<<<<<<<<<
>> > > > > --- Software Radio Systems LTE eNodeB ---
>> > > > >
>> > > > > Reading configuration file
>> /home/duo/.srs/enb.conf...
>> > > > > linux; GNU C++ version 5.4.0 20160609;
>> Boost_105800;
>> > > > > UHD_003.010.002.HEAD-0-gbd6e21dc
>> > > > >
>> > > > > Soapy has found device #0: addr=1d50:6108,
>> > driver=lime,
>> > > > > label=LimeSDR-USB [USB 3.0] 9061C02C73125,
>> > media=USB 3.0,
>> > > module=FX3,
>> > > > > name=LimeSDR-USB, serial=0009061C02C73125,
>> > > > > [INFO] Make connection: 'LimeSDR-USB [USB 3.0]
>> > 9061C02C73125'
>> > > > > [INFO] Reference clock 30.72 MHz
>> > > > > [INFO] Device name: LimeSDR-USB
>> > > > > [INFO] Reference: 30.72 MHz
>> > > > > [INFO] LMS7002M calibration values caching Disable
>> > > > > [INFO] RX LPF configured
>> > > > > Set Rx bandwidth to 2.50 MHz
>> > > > > [INFO] Filter calibrated. Filter order-4th, filter
>> > bandwidth
>> > > set to 5
>> > > > > MHz.Real pole 1st order filter set to 2.5 MHz.
>> > Preemphasis
>> > > filter
>> > > > not active
>> > > > > [INFO] TX LPF configured
>> > > > > Set Tx bandwidth to 5.00 MHz
>> > > > > Setting up RX stream
>> > > > > Setting up TX stream
>> > > > > Available device sensors:
>> > > > > - clock_locked
>> > > > > - lms7_temp
>> > > > > Available sensors for RX channel 0:
>> > > > > - lo_locked
>> > > > > [INFO] Tx calibration finished
>> > > > > [INFO] Rx calibration finished
>> > > > > State of gain elements for Rx channel 0 (AGC not
>> > supported):
>> > > > > - TIA: 9.00 dB
>> > > > > - LNA: 30.00 dB
>> > > > > - PGA: -4.00 dB
>> > > > > State of gain elements for Tx channel 0 (AGC not
>> > supported):
>> > > > > - TIA: 9.00 dB
>> > > > > - LNA: 30.00 dB
>> > > > > - PGA: -4.00 dB
>> > > > > Rx antenna set to LNAH
>> > > > > Tx antenna set to BAND1
>> > > > >
>> > > > > Warning burst preamble is not calibrated for
>> > device lime.
>> > > Set a value
>> > > > > manually
>> > > > >
>> > > > > Setting frequency: DL=1845.0 Mhz, UL=1750.0 MHz
>> > > > > Tuned Tx to 1845.00 MHz
>> > > > > Tuned Rx to 1750.00 MHz
>> > > > > Set master clock rate to 15.36 MHz
>> > > > > Setting Sampling frequency 3.84 MHz
>> > > > > [INFO] RX LPF configured
>> > > > > Set Rx bandwidth to 2.88 MHz
>> > > > > [INFO] Filter calibrated. Filter order-4th, filter
>> > bandwidth
>> > > set to 5
>> > > > > MHz.Real pole 1st order filter set to 2.5 MHz.
>> > Preemphasis
>> > > filter
>> > > > not active
>> > > > > [INFO] TX LPF configured
>> > > > > Set Tx bandwidth to 5.00 MHz
>> > > > > Setting manual TX/RX offset to 72 samples
>> > > > >
>> > > > > ==== eNodeB started ===
>> > > > > Type <t> to view trace
>> > > > > [INFO] Tx calibration finished
>> > > > > [INFO] Rx calibration finished
>> > > > > [WARNING] L
>> > > > > RACH: tti=9281, preamble=45, offset=3,
>> > temp_crnti=0x46
>> > > > > Unhandled feature in RRC function:
>> > > > >
>> liblte_rrc_unpack_rrc_connection_setup_complete_msg
>> > > > >
>> > > > > User 0x46 connected
>> > > > > Bus error *(this happen when tuen on the data)*
>> > > > >>>>>>>>>>>>>>>>>>>>>>>>
>> > > > >
>> > > > > I think the problem related this message :
>> > Unhandled feature
>> > > in RRC
>> > > > > function:
>> > liblte_rrc_unpack_rrc_connection_setup_complete_msg
>> > > > >
>> > > > > looking forward to hearing advise from you! :-)
>> > > > >
>> > > > > Many Thanks.
>> > > > >
>> > > > > regards,
>> > > > > Sandi / DUO
>> > > > >
>> > > > > On Fri, Nov 9, 2018 at 3:57 PM Andre Puschmann
>> > > > > <andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>
>> > > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>>
>> > > > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>
>> > > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>>>> wrote:
>> > > > >
>> > > > > Hey,
>> > > > >
>> > > > > can you provide a eNB log with loglevel info
>> > along with the
>> > > > > correpsonding S1 pcap, please? From the last
>> > PCAP you sent
>> > > > everything
>> > > > > looked fine at first glance.
>> > > > >
>> > > > > Thanks
>> > > > > Andre
>> > > > >
>> > > > >
>> > > > > On 8/11/18 10:23, ALEJANDRO BLANCO PIZARRO
>> wrote:
>> > > > > > Hi Sandi,
>> > > > > >
>> > > > > > Hi I am not an expert on LimeSRD and srsLTE,
>> > because I
>> > > > always use
>> > > > > USRP.
>> > > > > > But, when the UE cannot attach correctly it
>> > is probably a
>> > > > > > misconfiguration in the EPC, what EPC are
>> > you using?
>> > > If you
>> > > > can attach
>> > > > > > the log of the EPC it will be great.
>> > > > > >
>> > > > > > BTW, 25MHz is pnb=25, not 15. If I were you,
>> > I would
>> > > > configure the
>> > > > > basic
>> > > > > > set up, change the value of pnb to 6.
>> > > > > >
>> > > > > > Best,
>> > > > > > Alejandro
>> > > > > >
>> > > > > > El jue., 8 nov. 2018 a las 5:08, Sandi
>> Suhendro
>> > > > (<djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>
>> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>
>> > > > > <mailto:djks74 at gmail.com
>> > <mailto:djks74 at gmail.com> <mailto:djks74 at gmail.com
>> > <mailto:djks74 at gmail.com>>
>> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>>
>> > > > > > <mailto:djks74 at gmail.com
>> > <mailto:djks74 at gmail.com> <mailto:djks74 at gmail.com
>> > <mailto:djks74 at gmail.com>>
>> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>
>> > > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>
>> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>>>>)
>> escribió:
>> > > > > >
>> > > > > > Hi Alejandro,
>> > > > > > Change to 5mhz set on pnb=15
>> > > > > >
>> > > > > > Same result. :(
>> > > > > > Always hangup after turn on data.
>> > > > > >
>> > > > > > Regards,
>> > > > > > Sandi
>> > > > > >
>> > > > > > On Wed, Nov 7, 2018, 23:36 ALEJANDRO
>> > BLANCO PIZARRO
>> > > > > > <100283180 at alumnos.uc3m.es
>> > <mailto:100283180 at alumnos.uc3m.es>
>> > > <mailto:100283180 at alumnos.uc3m.es
>> > <mailto:100283180 at alumnos.uc3m.es>>
>> > > > <mailto:100283180 at alumnos.uc3m.es
>> > <mailto:100283180 at alumnos.uc3m.es>
>> > > <mailto:100283180 at alumnos.uc3m.es
>> > <mailto:100283180 at alumnos.uc3m.es>>>
>> > > <mailto:100283180 at alumnos.uc3m.es
>> > <mailto:100283180 at alumnos.uc3m.es>
>> > <mailto:100283180 at alumnos.uc3m.es
>> > <mailto:100283180 at alumnos.uc3m.es>>
>> > > > <mailto:100283180 at alumnos.uc3m.es
>> > <mailto:100283180 at alumnos.uc3m.es>
>> > > <mailto:100283180 at alumnos.uc3m.es
>> > <mailto:100283180 at alumnos.uc3m.es>>>>
>> > > > > <mailto:100283180 at alumnos.uc3m.es
>> > <mailto:100283180 at alumnos.uc3m.es>
>> > > <mailto:100283180 at alumnos.uc3m.es
>> > <mailto:100283180 at alumnos.uc3m.es>>
>> > > > <mailto:100283180 at alumnos.uc3m.es
>> > <mailto:100283180 at alumnos.uc3m.es>
>> > > <mailto:100283180 at alumnos.uc3m.es
>> > <mailto:100283180 at alumnos.uc3m.es>>>
>> > > > > <mailto:100283180 at alumnos.uc3m.es
>> > <mailto:100283180 at alumnos.uc3m.es>
>> > > <mailto:100283180 at alumnos.uc3m.es
>> > <mailto:100283180 at alumnos.uc3m.es>>
>> > > > <mailto:100283180 at alumnos.uc3m.es
>> > <mailto:100283180 at alumnos.uc3m.es>
>> > > <mailto:100283180 at alumnos.uc3m.es
>> > <mailto:100283180 at alumnos.uc3m.es>>>>> wrote:
>> > > > > >
>> > > > > > Have you tried to decrement the
>> > bandwidth? It
>> > > could be
>> > > > > that with
>> > > > > > your bandwidth, you have bottleneck.
>> > Try 5 MHz.
>> > > > > >
>> > > > > > Best,
>> > > > > > Alejandro
>> > > > > >
>> > > > > > El mié., 7 nov. 2018 16:53, Sandi
>> > Suhendro
>> > > > > <djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>
>> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>
>> > > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>
>> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>>
>> > > > > > <mailto:djks74 at gmail.com
>> > <mailto:djks74 at gmail.com>
>> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>
>> > > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>
>> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>>>>
>> escribió:
>> > > > > >
>> > > > > > Dear Ignas, Andre,
>> > > > > > the phone is attached but it
>> > produce an error
>> > > > when turn on
>> > > > > > the cellular data on my phone:
>> > (VIVO XShot)
>> > > > > >
>> > > > > > here is the log : (pcap
>> attached)
>> > > > > >
>> > > > > > ==== eNodeB started ===
>> > > > > > Type <t> to view trace
>> > > > > > [INFO] Tx calibration finished
>> > > > > > [INFO] Rx calibration finished
>> > > > > > [WARNING] L
>> > > > > > [WARNING] L
>> > > > > > RACH: tti=10221, preamble=23,
>> > offset=1,
>> > > > temp_crnti=0x46
>> > > > > > RACH: tti=1, preamble=23,
>> offset=1,
>> > > temp_crnti=0x47
>> > > > > > Disconnecting rnti=0x46.
>> > > > > > Disconnecting rnti=0x47.
>> > > > > > RACH: tti=381, preamble=44,
>> > offset=1,
>> > > > temp_crnti=0x48
>> > > > > > Disconnecting rnti=0x48.
>> > > > > > RACH: tti=2891, preamble=22,
>> > offset=1,
>> > > > temp_crnti=0x49
>> > > > > > Unhandled feature in RRC
>> function:
>> > > > > >
>> > > liblte_rrc_unpack_rrc_connection_setup_complete_msg
>> > > > > >
>> > > > > > Disconnecting rnti=0x49.
>> > > > > > RACH: tti=4671, preamble=9,
>> > offset=1,
>> > > > temp_crnti=0x4a
>> > > > > > Unhandled feature in RRC
>> function:
>> > > > > >
>> > > liblte_rrc_unpack_rrc_connection_setup_complete_msg
>> > > > > >
>> > > > > > User 0x4a connected
>> > > > > > Bus error
>> > > > > > >>>>>>>>>>>>>>>>.
>> > > > > >
>> > > > > > hope you can give me advise what
>> > is wrong?
>> > > Thanks in
>> > > > > advance.
>> > > > > >
>> > > > > > regards,
>> > > > > > DUO / Sandi
>> > > > > >
>> > > > > >
>> > > > > >
>> > > > > > On Tue, Nov 6, 2018 at 8:43 PM
>> > Sandi Suhendro
>> > > > > > <djks74 at gmail.com
>> > <mailto:djks74 at gmail.com>
>> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>
>> > > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>
>> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>>
>> > > > > <mailto:djks74 at gmail.com
>> > <mailto:djks74 at gmail.com> <mailto:djks74 at gmail.com
>> > <mailto:djks74 at gmail.com>>
>> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>
>> > > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>
>> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>>>> wrote:
>> > > > > >
>> > > > > > Dear Ignas,
>> > > > > > Thanks to let me know to
>> > update. Now it
>> > > > works and
>> > > > > i saw
>> > > > > > my 4g network now. :)
>> > > > > >
>> > > > > > Just strange not all phone
>> > see the
>> > > network. Will
>> > > > > try to
>> > > > > > attach now. :)
>> > > > > >
>> > > > > > Thanks and warm regards,
>> > > > > > Sandi
>> > > > > >
>> > > > > > On Tue, Nov 6, 2018, 19:56
>> Ignas
>> > > Jarusevicius
>> > > > > >
>> > <i.jarusevicius at limemicro.com <mailto:
>> i.jarusevicius at limemicro.com>
>> > > <mailto:i.jarusevicius at limemicro.com
>> > <mailto:i.jarusevicius at limemicro.com>>
>> > > > <mailto:i.jarusevicius at limemicro.com
>> > <mailto:i.jarusevicius at limemicro.com>
>> > > <mailto:i.jarusevicius at limemicro.com
>> > <mailto:i.jarusevicius at limemicro.com>>>
>> > > > > <mailto:i.jarusevicius at limemicro.com
>> > <mailto:i.jarusevicius at limemicro.com>
>> > > <mailto:i.jarusevicius at limemicro.com
>> > <mailto:i.jarusevicius at limemicro.com>>
>> > > > <mailto:i.jarusevicius at limemicro.com
>> > <mailto:i.jarusevicius at limemicro.com>
>> > > <mailto:i.jarusevicius at limemicro.com
>> > <mailto:i.jarusevicius at limemicro.com>>>>
>> > > > > >
>> > <mailto:i.jarusevicius at limemicro.com
>> > <mailto:i.jarusevicius at limemicro.com>
>> > > <mailto:i.jarusevicius at limemicro.com
>> > <mailto:i.jarusevicius at limemicro.com>>
>> > > > <mailto:i.jarusevicius at limemicro.com
>> > <mailto:i.jarusevicius at limemicro.com>
>> > > <mailto:i.jarusevicius at limemicro.com
>> > <mailto:i.jarusevicius at limemicro.com>>>
>> > > > > <mailto:i.jarusevicius at limemicro.com
>> > <mailto:i.jarusevicius at limemicro.com>
>> > > <mailto:i.jarusevicius at limemicro.com
>> > <mailto:i.jarusevicius at limemicro.com>>
>> > > > <mailto:i.jarusevicius at limemicro.com
>> > <mailto:i.jarusevicius at limemicro.com>
>> > > <mailto:i.jarusevicius at limemicro.com
>> > <mailto:i.jarusevicius at limemicro.com>>>>> wrote:
>> > > > > >
>> > > > > > Hi Sandri,
>> > > > > >
>> > > > > > I have noticed that you
>> > are using old
>> > > > libLimeSuite
>> > > > > > version as recent
>> > versions show
>> > > > 'module=FX3' for
>> > > > > > LimeSDR-USB. So try
>> updating
>> > > LimeSuite.
>> > > > > > Also, I was I able to
>> > get srsenb
>> > > working
>> > > > with
>> > > > > > LimeSDR boards few
>> > months ago. I have
>> > > > attached one
>> > > > > > of my enb.conf that used
>> > to work (not
>> > > > sure if it
>> > > > > > still works with current
>> > srsLTE
>> > > version).
>> > > > > >
>> > > > > > -Ignas
>> > > > > >
>> > > > > > On 2018-11-05 16:02,
>> Sandi
>> > > Suhendro wrote:
>> > > > > >> Hi Andre,
>> > > > > >> ok finally working to
>> > Lime direct via
>> > > > Soapy, just
>> > > > > >> edit the makelist text
>> > and remove
>> > > the UHD.
>> > > > > >>
>> > > > > >> here I got more error,
>> what
>> > > should I do?
>> > > > > >>
>> > > > > >> <<<<<<<<<<
>> > > > > >> --- Software Radio
>> > Systems LTE
>> > > eNodeB ---
>> > > > > >>
>> > > > > >> Reading configuration
>> file
>> > > > > /home/duo/.srs/enb.conf...
>> > > > > >> Soapy has found device
>> #0:
>> > > addr=1d50:6108,
>> > > > > >> driver=lime,
>> > label=LimeSDR-USB
>> > > [USB 3.0]
>> > > > > >> 9061C02C73125,
>> > media=USB 3.0,
>> > > > module=STREAM,
>> > > > > >> name=LimeSDR-USB,
>> > > serial=0009061C02C73125,
>> > > > > >> [INFO] Make connection:
>> > 'LimeSDR-USB
>> > > > [USB 3.0]
>> > > > > >> 9061C02C73125'
>> > > > > >> [INFO] Device name:
>> > LimeSDR-USB
>> > > > > >> [INFO] Reference:
>> 30.72 MHz
>> > > > > >> [INFO] Init LMS7002M(0)
>> > > > > >> [INFO] Ver=7, Rev=1,
>> Mask=1
>> > > > > >> [INFO] LMS7002M
>> > calibration values
>> > > > caching Enable
>> > > > > >> Set Rx bandwidth to
>> > 2.50 MHz
>> > > > > >> [ERROR]
>> > setBandwidth(Tx, 0, 1.44 MHz)
>> > > > Failed - Tx
>> > > > > >> lpf(1.44 MHz) out of
>> > range 5-40
>> > > MHz and
>> > > > > 50-130 MHz
>> > > > > >> setBandwidth fail: Tx
>> > lpf(1.44
>> > > MHz) out
>> > > > of range
>> > > > > >> 5-40 MHz and 50-130 MHz
>> > > > > >> Setting up RX stream
>> > > > > >> Setting up TX stream
>> > > > > >> Available device
>> sensors:
>> > > > > >> - clock_locked
>> > > > > >> - lms7_temp
>> > > > > >> Available sensors for
>> > RX channel 0:
>> > > > > >> - lo_locked
>> > > > > >> State of gain elements
>> > for Rx
>> > > channel 0
>> > > > (AGC not
>> > > > > >> supported):
>> > > > > >> - LNA: 30.00 dB
>> > > > > >> - TIA: 0.00 dB
>> > > > > >> - PGA: 5.00 dB
>> > > > > >> State of gain elements
>> > for Tx
>> > > channel 0
>> > > > (AGC not
>> > > > > >> supported):
>> > > > > >> - LNA: nan dB
>> > > > > >> - TIA: nan dB
>> > > > > >> - PGA: nan dB
>> > > > > >> Rx antenna set to LNAL
>> > > > > >> Tx antenna set to BAND1
>> > > > > >>
>> > > > > >> Warning burst preamble
>> > is not
>> > > > calibrated for
>> > > > > >> device lime. Set a
>> > value manually
>> > > > > >>
>> > > > > >> Setting frequency:
>> > DL=1845.0 Mhz,
>> > > > UL=1750.0 MHz
>> > > > > >> Tuned Tx to 1845.00 MHz
>> > > > > >> Tuned Rx to 1750.00 MHz
>> > > > > >> Set master clock rate
>> > to 11.52 MHz
>> > > > > >> Setting Sampling
>> > frequency 11.52 MHz
>> > > > > >> setSampleRate Rx fail:
>> > > > SoapyLMS7::setSampleRate()
>> > > > > >> -- rate too high
>> > > > > >> setSampleRate Tx fail:
>> > > > SoapyLMS7::setSampleRate()
>> > > > > >> -- rate too high
>> > > > > >>
>> > > > > >> Warning TX/RX time
>> > offset for
>> > > sampling rate
>> > > > > -1 KHz
>> > > > > >> not calibrated. Using
>> > > interpolated value
>> > > > > >>
>> > > > > >>
>> > > > > >> ==== eNodeB started ===
>> > > > > >> Type <t> to view trace
>> > > > > >>
>> > > > > >> >>>>>>>>>>>>>>
>> > > > > >>
>> > > > > >> Please advise! Thanks.
>> :-)
>> > > > > >>
>> > > > > >> regards,
>> > > > > >> Sandi / DUO
>> > > > > >>
>> > > > > >>
>> > > > > >> On Mon, Nov 5, 2018 at
>> > 8:07 PM Sandi
>> > > > Suhendro
>> > > > > >> <djks74 at gmail.com
>> > <mailto:djks74 at gmail.com>
>> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>
>> > > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>
>> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>
>> > > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>>
>> > > > > <mailto:djks74 at gmail.com
>> > <mailto:djks74 at gmail.com> <mailto:djks74 at gmail.com
>> > <mailto:djks74 at gmail.com>>
>> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>
>> > > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>
>> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>>>> wrote:
>> > > > > >>
>> > > > > >> I did try remove
>> > the soapyUHD and
>> > > > delete the
>> > > > > >> libuhd and
>> > libuhdsupport from
>> > > > usr/local/lib,
>> > > > > >> but when re
>> install the
>> > > srs-LTE, it
>> > > > gives me
>> > > > > >> error it need UHD.
>> > > > > >> do you know it may
>> > cause I
>> > > miss it
>> > > > how to
>> > > > > >> build srsLTE direct
>> > to soapySDR?
>> > > > > >>
>> > > > > >> anyway, it has
>> > output signal on
>> > > > earfcn 1600,
>> > > > > >> but dont see the
>> > network with
>> > > UHD.
>> > > > > >>
>> > > > > >> maybe better using
>> > soapySDR
>> > > instead
>> > > > UHD, but
>> > > > > >> the installation
>> > asking UHD.
>> > > > > >>
>> > > > > >> please advise.
>> > > > > >>
>> > > > > >> regards,
>> > > > > >> Sandi
>> > > > > >>
>> > > > > >> On Mon, Nov 5, 2018
>> > at 3:11
>> > > AM Andre
>> > > > > Puschmann
>> > > > > >>
>> > > > <andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>
>> > > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>>
>> > > > >
>> > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>
>> > > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>>>
>> > > > > >>
>> > > > >
>> > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>
>> > > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>>
>> > > > >
>> > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>
>> > > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>>>>>
>> > > > > >> wrote:
>> > > > > >>
>> > > > > >> Hey,
>> > > > > >>
>> > > > > >> seems like you
>> > are trying to
>> > > > run the Lime
>> > > > > >> through UHD,
>> > i.e. using the
>> > > > > >> uhd-soapy
>> > wrapper. I am not
>> > > > sure if it is
>> > > > > >> working well
>> > but maybe it
>> > > > > >> does. Does it
>> > output a
>> > > signal?
>> > > > > >>
>> > > > > >> We do have a
>> > Soapy driver
>> > > which
>> > > > also
>> > > > > works
>> > > > > >> with the Lime
>> > so maybe try
>> > > > > >> using that
>> > instead. Probably
>> > > > the easiest
>> > > > > >> is to uninstall
>> > the uhd-soapy
>> > > > > >> wrapper. The
>> > problem here is
>> > > > that the
>> > > > > >> srsLTE's RF
>> driver
>> > > library stops
>> > > > > >> looking for
>> > other devices as
>> > > > soon as a
>> > > > > >> supported
>> > device is found
>> > > and the
>> > > > > >> UHD driver is
>> > the first
>> > > to query.
>> > > > > >>
>> > > > > >>
>> > > > > >> Hope that
>> helps.
>> > > > > >>
>> > > > > >> Cheers
>> > > > > >> Andre
>> > > > > >>
>> > > > > >>
>> > > > > >>
>> > > > > >>
>> > > > > >> On 4/11/18
>> > 15:07, Sandi
>> > > > Suhendro wrote:
>> > > > > >> > Dear Andre,
>> > > > > >> > Do you know
>> > what I miss?
>> > > > > >> > I have this
>> > following
>> > > error :
>> > > > > >> > <<<<<<<<<
>> > > > > >> > sudo srsenb
>> > > > > >> > linux; GNU
>> > C++ version
>> > > 5.4.0
>> > > > 20160609;
>> > > > > >> Boost_105800;
>> > > > > >> >
>> > > UHD_003.010.002.HEAD-0-gbd6e21dc
>> > > > > >> >
>> > > > > >> >
>> > > > > >> > Built in
>> > Release mode using
>> > > > commit
>> > > > > >> 1c015aab on
>> > branch master.
>> > > > > >> >
>> > > > > >> > --- Software
>> > Radio
>> > > Systems LTE
>> > > > > eNodeB ---
>> > > > > >> >
>> > > > > >> > Reading
>> > configuration file
>> > > > > >>
>> > /home/duo/.srs/enb.conf...
>> > > > > >> > Opening USRP
>> > with args:
>> > > > > >> > -- Make
>> > connection:
>> > > > 'LimeSDR-USB [USB
>> > > > > >> 3.0]
>> 9061C02C73125'
>> > > > > >> > -- Device
>> > name: LimeSDR-USB
>> > > > > >> > -- Reference:
>> > 30.72 MHz
>> > > > > >> > -- Init
>> > LMS7002M(0)
>> > > > > >> > -- Ver=7,
>> > Rev=1, Mask=1
>> > > > > >> > -- LMS7002M
>> > calibration
>> > > > values caching
>> > > > > >> Enable
>> > > > > >> > Setting
>> > frequency:
>> > > DL=1845.0 Mhz,
>> > > > > >> UL=1750.0 MHz
>> > > > > >> > Setting
>> > Sampling frequency
>> > > > 11.52 MHz
>> > > > > >> >
>> > > > > >> > Warning TX/RX
>> > time
>> > > offset has
>> > > > not been
>> > > > > >> calibrated for
>> > device
>> > > > > >> > uhd_unknown.
>> > Set a
>> > > value manually
>> > > > > >> >
>> > > > > >> >
>> > > > > >> > ==== eNodeB
>> > started ===
>> > > > > >> > Type <t> to
>> > view trace
>> > > > > >> > Error timed
>> > out while
>> > > > receiving samples
>> > > > > >> from UHD.
>> > > > > >> > Error timed
>> > out while
>> > > > receiving samples
>> > > > > >> from UHD.
>> > > > > >> > Error timed
>> > out while
>> > > > receiving samples
>> > > > > >> from UHD.
>> > > > > >> >>>>>>>>>>>>
>> > > > > >> >
>> > > > > >> > And in the
>> log of
>> > > nextepc is :
>> > > > > >> > [11/04
>> > 20:48:59.179] eNB-S1
>> > > > > >>
>> > accepted[127.0.1.1]:55722 in
>> > > > s1_path
>> > > > > module
>> > > > > >> > [11/04
>> > 20:48:59.180] eNB-S1
>> > > > > >>
>> > accepted[127.0.1.1] in
>> > > > master_sm module
>> > > > > >> >
>> > > > > >> >
>> > > > > >> > Please
>> > advise! Thanks in
>> > > > advance. :-)
>> > > > > >> >
>> > > > > >> > regards,
>> > > > > >> > Sandi / DUO
>> > > > > >> >
>> > > > > >> >
>> > > > > >> > On Fri, Nov
>> > 2, 2018 at 3:51
>> > > > PM Andre
>> > > > > >> Puschmann
>> > > > > >> >
>> > > > > >>
>> > > > > <andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>
>> > > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>>
>> > > > >
>> > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>
>> > > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>>>
>> > > > > >>
>> > > > >
>> > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>
>> > > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>>
>> > > > >
>> > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>
>> > > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>>>>
>> > > > > >> >
>> > > > > >>
>> > > > >
>> > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>
>> > > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>>
>> > > > >
>> > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>
>> > > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>>>
>> > > > > >>
>> > > > >
>> > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>
>> > > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>>
>> > > > >
>> > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>
>> > > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>>>>>>
>> > > > > >> wrote:
>> > > > > >> >
>> > > > > >> > Sandi,
>> > > > > >> >
>> > > > > >> > glad to
>> > hear you got it
>> > > > > working. Let
>> > > > > >> us know how it
>> > goes.
>> > > > > >> >
>> > > > > >> > Cheers
>> > > > > >> > Andre
>> > > > > >> >
>> > > > > >> > On
>> > 2/11/18 8:54, Sandi
>> > > > Suhendro
>> > > > > wrote:
>> > > > > >> > > Dear
>> Andre,
>> > > > > >> > > sorry
>> > for this simple
>> > > > matter. try
>> > > > > >> to remove all
>> > and re
>> > > install and it
>> > > > > >> > > works
>> > now. Thanks.
>> > > > > >> > >
>> > > > > >> > >
>> regards,
>> > > > > >> > > Sandi
>> / DUO
>> > > > > >> > >
>> > > > > >> > > On Thu,
>> > Nov 1,
>> > > 2018 at
>> > > > 10:33 PM
>> > > > > >> Sandi Suhendro
>> > > > <djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>
>> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>
>> > > > > <mailto:djks74 at gmail.com
>> > <mailto:djks74 at gmail.com> <mailto:djks74 at gmail.com
>> > <mailto:djks74 at gmail.com>>
>> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>>
>> > > > > >>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>
>> > > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>
>> > > > > <mailto:djks74 at gmail.com
>> > <mailto:djks74 at gmail.com> <mailto:djks74 at gmail.com
>> > <mailto:djks74 at gmail.com>>
>> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>>>
>> > > > > >> >
>> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>
>> > > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>
>> > > > > <mailto:djks74 at gmail.com
>> > <mailto:djks74 at gmail.com> <mailto:djks74 at gmail.com
>> > <mailto:djks74 at gmail.com>>
>> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>>
>> > > > > >>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>
>> > > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>
>> > > > > <mailto:djks74 at gmail.com
>> > <mailto:djks74 at gmail.com> <mailto:djks74 at gmail.com
>> > <mailto:djks74 at gmail.com>>
>> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>>>>
>> > > > > >> > >
>> > > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>
>> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>
>> > > > > <mailto:djks74 at gmail.com
>> > <mailto:djks74 at gmail.com> <mailto:djks74 at gmail.com
>> > <mailto:djks74 at gmail.com>>
>> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>>
>> > > > > >>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>
>> > > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>
>> > > > > <mailto:djks74 at gmail.com
>> > <mailto:djks74 at gmail.com> <mailto:djks74 at gmail.com
>> > <mailto:djks74 at gmail.com>>
>> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>>>
>> > > > > >>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>
>> > > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>
>> > > > > <mailto:djks74 at gmail.com
>> > <mailto:djks74 at gmail.com> <mailto:djks74 at gmail.com
>> > <mailto:djks74 at gmail.com>>
>> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>>
>> > > > > >>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>
>> > > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>
>> > > > > <mailto:djks74 at gmail.com
>> > <mailto:djks74 at gmail.com> <mailto:djks74 at gmail.com
>> > <mailto:djks74 at gmail.com>>
>> > > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>
>> > <mailto:djks74 at gmail.com <mailto:djks74 at gmail.com>>>>>>>>
>> wrote:
>> > > > > >> > >
>> > > > > >> > >
>> > Dear Andre,
>> > > > > >> > >
>> > Thanks for
>> > > response.
>> > > > > >> > >
>> > > > > >> > > Im
>> > using ubuntu
>> > > > 16.04 and
>> > > > > >> build soapySDR
>> > from git.
>> > > > > >> > > as
>> > I remember Im
>> > > > using ppa at
>> > > > > >> first but I
>> > also install
>> > > again
>> > > > > >> > from git.
>> > > > > >> > >
>> > what should I do?
>> > > > remove all
>> > > > > >> soapy from apt
>> > and make
>> > > uninstall
>> > > > > >> > from
>> > > > > >> > > git
>> > too then re
>> > > > install?
>> > > > > >> > >
>> > > > > >> > >
>> > please advise.
>> > > > > >> > >
>> > > > > >> > >
>> > regards,
>> > > > > >> > >
>> > Sandi / DUO
>> > > > > >> > >
>> > > > > >> > > On
>> > Thu, Nov
>> > > 1, 2018 at
>> > > > > 9:33 PM
>> > > > > >> Andre Puschmann
>> > > > > >> > >
>> > > > > >>
>> > > > > <andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>
>> > > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>>
>> > > > >
>> > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>
>> > > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>>>
>> > > > > >>
>> > > > >
>> > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>
>> > > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>>
>> > > > >
>> > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>
>> > > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>>>>
>> > > > > >> >
>> > > > > >>
>> > > > >
>> > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>
>> > > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>>
>> > > > >
>> > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>
>> > > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>>>
>> > > > > >>
>> > > > >
>> > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>
>> > > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>>
>> > > > >
>> > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>
>> > > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>>>>>
>> > > > > >> > >
>> > > > > >>
>> > > > >
>> > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>
>> > > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>>
>> > > > >
>> > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>
>> > > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>>>
>> > > > > >>
>> > > > >
>> > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>
>> > > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>>
>> > > > >
>> > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>
>> > > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>>>>
>> > > > > >> >
>> > > > > >>
>> > > > >
>> > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>
>> > > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>>
>> > > > >
>> > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>
>> > > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>>>
>> > > > > >>
>> > > > >
>> > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>
>> > > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>>
>> > > > >
>> > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>
>> > > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>
>> > > <mailto:andre.puschmann at softwareradiosystems.com
>> > <mailto:andre.puschmann at softwareradiosystems.com>>>>>>>>
>> > > > > >> wrote:
>> > > > > >> > >
>> > > > > >> > >
>> > Likely to
>> > > be a
>> > > > > mismatch of
>> > > > > >> headers. What
>> > system are
>> > > you on and
>> > > > > >> > >
>> > where do
>> > > > > >> > >
>> > you get the
>> > > > soapy dev
>> > > > > >> package from?
>> > git, ppa?
>> > > > > >> > >
>> > > > > >> > >
>> > > > > >> > >
>> > On 31/10/18
>> > > > 12:43, Sandi
>> > > > > >> Suhendro wrote:
>> > > > > >> > >
>> > > Dear list,
>> > > > > >> > >
>> > > hope
>> > > someone can
>> > > > > give me
>> > > > > >> advise what is
>> > wrong?
>> > > > > >> > >
>> > > Im runing
>> > > > fine with
>> > > > > >> osmocom or
>> > openbts-umts.
>> > > (2g/3g)
>> > > > > >> > >
>> > > but....
>> > > > > >> > >
>> > > Im facing
>> > > > SoapySDR
>> > > > > range
>> > > > > >> error when
>> > build srsLTE :
>> > > > > >> > >
>> >
>> > > > > >> > >
>> > > [ 40%]
>> > > Linking C
>> > > > > >> executable
>> > pdsch_test
>> > > > > >> > >
>> > > [ 40%]
>> > > Built
>> > > > target
>> > > > > >> pdsch_test
>> > > > > >> > >
>> > > [ 40%]
>> > > Building C
>> > > > > object
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > >
>> > lib/src/phy/rf/CMakeFiles/srslte_rf_utils.dir/rf_utils.c.o
>> > > > > >> > >
>> > > [ 40%]
>> > > > Linking C static
>> > > > > >> library
>> > libsrslte_rf_utils.a
>> > > > > >> > >
>> > > [ 40%]
>> > > Built
>> > > > target
>> > > > > >> srslte_rf_utils
>> > > > > >> > >
>> > > [ 41%]
>> > > Building C
>> > > > > object
>> > > > > >> > >
>> > > > > >>
>> > > > >
>> > lib/src/phy/rf/CMakeFiles/srslte_rf.dir/rf_imp.c.o
>> > > > > >> > >
>> > > [ 41%]
>> > > Building C
>> > > > > object
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > >
>> > lib/src/phy/rf/CMakeFiles/srslte_rf.dir/rf_uhd_imp.c.o
>> > > > > >> > >
>> > > [ 41%]
>> > > > Building CXX
>> > > > > object
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > >
>> > lib/src/phy/rf/CMakeFiles/srslte_rf.dir/uhd_c_api.cpp.o
>> > > > > >> > >
>> > > [ 41%]
>> > > Building C
>> > > > > object
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > >
>> > lib/src/phy/rf/CMakeFiles/srslte_rf.dir/rf_soapy_imp.c.o
>> > > > > >> > >
>> > > In file
>> > > > included from
>> > > > > >> > >
>> > > > > >>
>> > > > >
>> > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>> > > > > >> > >
>> >
>> > > > > >>
>> > > /usr/include/SoapySDR/Types.h:25:3:
>> > > > > error:
>> > > > > >> conflicting
>> > > > > >> > types for
>> > > > > >> > >
>> >
>> > > ‘SoapySDRRange’
>> > > > > >> > >
>> > > }
>> > > SoapySDRRange;
>> > > > > >> > >
>> > > ^
>> > > > > >> > >
>> > > In file
>> > > > included from
>> > > > > >> >
>> > > > > >>
>> > > > > /usr/local/include/SoapySDR/Device.h:18:0,
>> > > > > >> > >
>> >
>> > > > from
>> > > > > >> > >
>> > > > > >>
>> > > > >
>> > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > /usr/local/include/SoapySDR/Types.h:25:3:
>> > > > > >> note: previous
>> > > > > >> > >
>> > > declaration of
>> > > > > >> > >
>> >
>> > > > ‘SoapySDRRange’ was
>> > > > > here
>> > > > > >> > >
>> > > }
>> > > SoapySDRRange;
>> > > > > >> > >
>> > > ^
>> > > > > >> > >
>> > > In file
>> > > > included from
>> > > > > >> > >
>> > > > > >>
>> > > > >
>> > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>> > > > > >> > >
>> >
>> > > > > >>
>> > > /usr/include/SoapySDR/Types.h:33:3:
>> > > > > error:
>> > > > > >> conflicting
>> > > > > >> > types for
>> > > > > >> > >
>> >
>> > > ‘SoapySDRKwargs’
>> > > > > >> > >
>> > > }
>> > > > SoapySDRKwargs;
>> > > > > >> > >
>> > > ^
>> > > > > >> > >
>> > > In file
>> > > > included from
>> > > > > >> >
>> > > > > >>
>> > > > > /usr/local/include/SoapySDR/Device.h:18:0,
>> > > > > >> > >
>> >
>> > > > from
>> > > > > >> > >
>> > > > > >>
>> > > > >
>> > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > /usr/local/include/SoapySDR/Types.h:33:3:
>> > > > > >> note: previous
>> > > > > >> > >
>> > > declaration of
>> > > > > >> > >
>> >
>> > > ‘SoapySDRKwargs’
>> > > > > was here
>> > > > > >> > >
>> > > }
>> > > > SoapySDRKwargs;
>> > > > > >> > >
>> > > ^
>> > > > > >> > >
>> > > In file
>> > > > included from
>> > > > > >> > >
>> > > > > >>
>> > > > >
>> > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > /usr/include/SoapySDR/Types.h:39:30:
>> > > > > >> error:
>> conflicting
>> > > > > >> > types for
>> > > > > >> > >
>> >
>> > > > > ‘SoapySDRKwargs_fromString’
>> > > > > >> > >
>> >
>> > > SOAPY_SDR_API
>> > > > > >> SoapySDRKwargs
>> > > > > >> >
>> > > > SoapySDRKwargs_fromString(const
>> > > > > >> > >
>> > char
>> > > *markup);
>> > > > > >> > >
>> >
>> > > > > >>
>> > > ^
>> > > > > >> > >
>> > > In file
>> > > > included from
>> > > > > >> >
>> > > > > >>
>> > > > > /usr/local/include/SoapySDR/Device.h:18:0,
>> > > > > >> > >
>> >
>> > > > from
>> > > > > >> > >
>> > > > > >>
>> > > > >
>> > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > > /usr/local/include/SoapySDR/Types.h:39:30:
>> > > > > >> note: previous
>> > > > > >> > >
>> > > declaration of
>> > > > > >> > >
>> >
>> > > > > >>
>> > > ‘SoapySDRKwargs_fromString’ was
>> > > > here
>> > > > > >> > >
>> >
>> > > SOAPY_SDR_API
>> > > > > >> SoapySDRKwargs
>> > > > > >> >
>> > > > SoapySDRKwargs_fromString(const
>> > > > > >> > >
>> > char
>> > > *markup);
>> > > > > >> > >
>> >
>> > > > > >>
>> > > ^
>> > > > > >> > >
>> > > In file
>> > > > included from
>> > > > > >> > >
>> > > > > >>
>> > > > >
>> > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > /usr/include/SoapySDR/Types.h:45:21:
>> > > > > >> error:
>> conflicting
>> > > > > >> > types for
>> > > > > >> > >
>> >
>> > > > > ‘SoapySDRKwargs_toString’
>> > > > > >> > >
>> >
>> > > > SOAPY_SDR_API char
>> > > > > >>
>> > > *SoapySDRKwargs_toString(const
>> > > > > >> > >
>> > > SoapySDRKwargs
>> > > > *args);
>> > > > > >> > >
>> >
>> > > > ^
>> > > > > >> > >
>> > > In file
>> > > > included from
>> > > > > >> >
>> > > > > >>
>> > > > > /usr/local/include/SoapySDR/Device.h:18:0,
>> > > > > >> > >
>> >
>> > > > from
>> > > > > >> > >
>> > > > > >>
>> > > > >
>> > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > > /usr/local/include/SoapySDR/Types.h:45:21:
>> > > > > >> note: previous
>> > > > > >> > >
>> > > declaration of
>> > > > > >> > >
>> >
>> > > > > >>
>> > ‘SoapySDRKwargs_toString’
>> > > was here
>> > > > > >> > >
>> >
>> > > > SOAPY_SDR_API char
>> > > > > >>
>> > > *SoapySDRKwargs_toString(const
>> > > > > >> > >
>> > > SoapySDRKwargs
>> > > > *args);
>> > > > > >> > >
>> >
>> > > > ^
>> > > > > >> > >
>> > > In file
>> > > > included from
>> > > > > >> > >
>> > > > > >>
>> > > > >
>> > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>> > > > > >> > >
>> >
>> > > > > >>
>> > > /usr/include/SoapySDR/Types.h:50:5:
>> > > > > error:
>> > > > > >> redeclaration
>> of
>> > > > > >> > >
>> > enumerator
>> > > > > >> > >
>> >
>> > > > > ‘SOAPY_SDR_ARG_INFO_BOOL’
>> > > > > >> > >
>> > >
>> > > > > >>
>> > SOAPY_SDR_ARG_INFO_BOOL,
>> > > > > >> > >
>> > > ^
>> > > > > >> > >
>> > > In file
>> > > > included from
>> > > > > >> >
>> > > > > >>
>> > > > > /usr/local/include/SoapySDR/Device.h:18:0,
>> > > > > >> > >
>> >
>> > > > from
>> > > > > >> > >
>> > > > > >>
>> > > > >
>> > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > /usr/local/include/SoapySDR/Types.h:50:5:
>> > > > > >> note: previous
>> > > > > >> > >
>> > definition of
>> > > > > >> > >
>> >
>> > > > > >>
>> > ‘SOAPY_SDR_ARG_INFO_BOOL’
>> > > was here
>> > > > > >> > >
>> > >
>> > > > > >>
>> > SOAPY_SDR_ARG_INFO_BOOL,
>> > > > > >> > >
>> > > ^
>> > > > > >> > >
>> > > In file
>> > > > included from
>> > > > > >> > >
>> > > > > >>
>> > > > >
>> > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>> > > > > >> > >
>> >
>> > > > > >>
>> > > /usr/include/SoapySDR/Types.h:51:5:
>> > > > > error:
>> > > > > >> redeclaration
>> of
>> > > > > >> > >
>> > enumerator
>> > > > > >> > >
>> >
>> > > > > ‘SOAPY_SDR_ARG_INFO_INT’
>> > > > > >> > >
>> > >
>> > > > > SOAPY_SDR_ARG_INFO_INT,
>> > > > > >> > >
>> > > ^
>> > > > > >> > >
>> > > In file
>> > > > included from
>> > > > > >> >
>> > > > > >>
>> > > > > /usr/local/include/SoapySDR/Device.h:18:0,
>> > > > > >> > >
>> >
>> > > > from
>> > > > > >> > >
>> > > > > >>
>> > > > >
>> > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > /usr/local/include/SoapySDR/Types.h:51:5:
>> > > > > >> note: previous
>> > > > > >> > >
>> > definition of
>> > > > > >> > >
>> >
>> > > > > ‘SOAPY_SDR_ARG_INFO_INT’
>> > > > > >> was here
>> > > > > >> > >
>> > >
>> > > > > SOAPY_SDR_ARG_INFO_INT,
>> > > > > >> > >
>> > > ^
>> > > > > >> > >
>> > > In file
>> > > > included from
>> > > > > >> > >
>> > > > > >>
>> > > > >
>> > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>> > > > > >> > >
>> >
>> > > > > >>
>> > > /usr/include/SoapySDR/Types.h:52:5:
>> > > > > error:
>> > > > > >> redeclaration
>> of
>> > > > > >> > >
>> > enumerator
>> > > > > >> > >
>> >
>> > > > > ‘SOAPY_SDR_ARG_INFO_FLOAT’
>> > > > > >> > >
>> > >
>> > > > > >>
>> > SOAPY_SDR_ARG_INFO_FLOAT,
>> > > > > >> > >
>> > > ^
>> > > > > >> > >
>> > > In file
>> > > > included from
>> > > > > >> >
>> > > > > >>
>> > > > > /usr/local/include/SoapySDR/Device.h:18:0,
>> > > > > >> > >
>> >
>> > > > from
>> > > > > >> > >
>> > > > > >>
>> > > > >
>> > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > /usr/local/include/SoapySDR/Types.h:52:5:
>> > > > > >> note: previous
>> > > > > >> > >
>> > definition of
>> > > > > >> > >
>> >
>> > > > > >>
>> > > ‘SOAPY_SDR_ARG_INFO_FLOAT’ was here
>> > > > > >> > >
>> > >
>> > > > > >>
>> > SOAPY_SDR_ARG_INFO_FLOAT,
>> > > > > >> > >
>> > > ^
>> > > > > >> > >
>> > > In file
>> > > > included from
>> > > > > >> > >
>> > > > > >>
>> > > > >
>> > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>> > > > > >> > >
>> >
>> > > > > >>
>> > > /usr/include/SoapySDR/Types.h:53:5:
>> > > > > error:
>> > > > > >> redeclaration
>> of
>> > > > > >> > >
>> > enumerator
>> > > > > >> > >
>> >
>> > > > > ‘SOAPY_SDR_ARG_INFO_STRING’
>> > > > > >> > >
>> > >
>> > > > > >>
>> > SOAPY_SDR_ARG_INFO_STRING
>> > > > > >> > >
>> > > ^
>> > > > > >> > >
>> > > In file
>> > > > included from
>> > > > > >> >
>> > > > > >>
>> > > > > /usr/local/include/SoapySDR/Device.h:18:0,
>> > > > > >> > >
>> >
>> > > > from
>> > > > > >> > >
>> > > > > >>
>> > > > >
>> > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > /usr/local/include/SoapySDR/Types.h:53:5:
>> > > > > >> note: previous
>> > > > > >> > >
>> > definition of
>> > > > > >> > >
>> >
>> > > > > >>
>> > > ‘SOAPY_SDR_ARG_INFO_STRING’ was
>> > > > here
>> > > > > >> > >
>> > >
>> > > > > >>
>> > SOAPY_SDR_ARG_INFO_STRING
>> > > > > >> > >
>> > > ^
>> > > > > >> > >
>> > > In file
>> > > > included from
>> > > > > >> > >
>> > > > > >>
>> > > > >
>> > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>> > > > > >> > >
>> >
>> > > > > >>
>> > > /usr/include/SoapySDR/Types.h:54:3:
>> > > > > error:
>> > > > > >> conflicting
>> > > > > >> > types for
>> > > > > >> > >
>> >
>> > > > ‘SoapySDRArgInfoType’
>> > > > > >> > >
>> > > }
>> > > > SoapySDRArgInfoType;
>> > > > > >> > >
>> > > ^
>> > > > > >> > >
>> > > In file
>> > > > included from
>> > > > > >> >
>> > > > > >>
>> > > > > /usr/local/include/SoapySDR/Device.h:18:0,
>> > > > > >> > >
>> >
>> > > > from
>> > > > > >> > >
>> > > > > >>
>> > > > >
>> > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > /usr/local/include/SoapySDR/Types.h:54:3:
>> > > > > >> note: previous
>> > > > > >> > >
>> > > declaration of
>> > > > > >> > >
>> >
>> > > > ‘SoapySDRArgInfoType’
>> > > > > >> was here
>> > > > > >> > >
>> > > }
>> > > > SoapySDRArgInfoType;
>> > > > > >> > >
>> > > ^
>> > > > > >> > >
>> > > In file
>> > > > included from
>> > > > > >> > >
>> > > > > >>
>> > > > >
>> > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > /usr/include/SoapySDR/Types.h:103:3:
>> > > > > >> error:
>> conflicting
>> > > > > >> > types for
>> > > > > >> > >
>> >
>> > > ‘SoapySDRArgInfo’
>> > > > > >> > >
>> > > }
>> > > > SoapySDRArgInfo;
>> > > > > >> > >
>> > > ^
>> > > > > >> > >
>> > > In file
>> > > > included from
>> > > > > >> >
>> > > > > >>
>> > > > > /usr/local/include/SoapySDR/Device.h:18:0,
>> > > > > >> > >
>> >
>> > > > from
>> > > > > >> > >
>> > > > > >>
>> > > > >
>> > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > > /usr/local/include/SoapySDR/Types.h:103:3:
>> > > > > >> note: previous
>> > > > > >> > >
>> > > declaration of
>> > > > > >> > >
>> >
>> > > ‘SoapySDRArgInfo’
>> > > > > was here
>> > > > > >> > >
>> > > }
>> > > > SoapySDRArgInfo;
>> > > > > >> > >
>> > > ^
>> > > > > >> > >
>> > > In file
>> > > > included from
>> > > > > >> > >
>> > > > > >>
>> > > > >
>> > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > /usr/include/SoapySDR/Types.h:114:20:
>> > > > > >> error:
>> conflicting
>> > > > > >> > types for
>> > > > > >> > >
>> >
>> > > > ‘SoapySDRKwargs_set’
>> > > > > >> > >
>> >
>> > > > SOAPY_SDR_API void
>> > > > > >>
>> > > > SoapySDRKwargs_set(SoapySDRKwargs *args,
>> > > > > >> > >
>> > const char
>> > > > > >> > >
>> > > *key, co
>> > > > > >> > >
>> >
>> > > > ^
>> > > > > >> > >
>> > > In file
>> > > > included from
>> > > > > >> >
>> > > > > >>
>> > > > > /usr/local/include/SoapySDR/Device.h:18:0,
>> > > > > >> > >
>> >
>> > > > from
>> > > > > >> > >
>> > > > > >>
>> > > > >
>> > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > > /usr/local/include/SoapySDR/Types.h:120:19:
>> note:
>> > > > > >> previous
>> > > > > >> > >
>> > declaration
>> > > > > >> > >
>> > > of
>> > > > ‘SoapySDRKwargs_set’
>> > > > > >> was here
>> > > > > >> > >
>> >
>> > > > SOAPY_SDR_API int
>> > > > > >>
>> > > > SoapySDRKwargs_set(SoapySDRKwargs *args,
>> > > > > >> > >
>> > const char
>> > > > > >> > >
>> > > *key, con
>> > > > > >> > >
>> >
>> > > > ^
>> > > > > >> > >
>> > > In file
>> > > > included from
>> > > > > >> > >
>> > > > > >>
>> > > > >
>> > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > /usr/include/SoapySDR/Types.h:120:27:
>> > > > > >> error:
>> conflicting
>> > > > > >> > types for
>> > > > > >> > >
>> >
>> > > > ‘SoapySDRKwargs_get’
>> > > > > >> > >
>> >
>> > > > SOAPY_SDR_API const
>> > > > > >> char
>> > > > *SoapySDRKwargs_get(SoapySDRKwargs
>> > > > > >> > >
>> > *args,
>> > > > > >> > >
>> > > const
>> > > char *
>> > > > > >> > >
>> >
>> > > > > ^
>> > > > > >> > >
>> > > In file
>> > > > included from
>> > > > > >> >
>> > > > > >>
>> > > > > /usr/local/include/SoapySDR/Device.h:18:0,
>> > > > > >> > >
>> >
>> > > > from
>> > > > > >> > >
>> > > > > >>
>> > > > >
>> > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > > /usr/local/include/SoapySDR/Types.h:126:27:
>> note:
>> > > > > >> previous
>> > > > > >> > >
>> > declaration
>> > > > > >> > >
>> > > of
>> > > > ‘SoapySDRKwargs_get’
>> > > > > >> was here
>> > > > > >> > >
>> >
>> > > > SOAPY_SDR_API const
>> > > > > >> char
>> > > *SoapySDRKwargs_get(const
>> > > > > >> >
>> > SoapySDRKwargs
>> > > > > >> > >
>> > > *args,
>> > > const
>> > > > > >> > >
>> >
>> > > > > ^
>> > > > > >> > >
>> > > In file
>> > > > included from
>> > > > > >> > >
>> > > > > >>
>> > > > >
>> > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > /usr/include/SoapySDR/Types.h:126:20:
>> > > > > >> error:
>> conflicting
>> > > > > >> > types for
>> > > > > >> > >
>> >
>> > > > ‘SoapySDRKwargs_clear’
>> > > > > >> > >
>> >
>> > > > SOAPY_SDR_API void
>> > > > > >>
>> > > SoapySDRKwargs_clear(SoapySDRKwargs
>> > > > > >> > *args);
>> > > > > >> > >
>> >
>> > > > ^
>> > > > > >> > >
>> > > In file
>> > > > included from
>> > > > > >> >
>> > > > > >>
>> > > > > /usr/local/include/SoapySDR/Device.h:18:0,
>> > > > > >> > >
>> >
>> > > > from
>> > > > > >> > >
>> > > > > >>
>> > > > >
>> > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > > /usr/local/include/SoapySDR/Types.h:132:20:
>> note:
>> > > > > >> previous
>> > > > > >> > >
>> > declaration
>> > > > > >> > >
>> > > of
>> > > > > >>
>> > ‘SoapySDRKwargs_clear’
>> > > was here
>> > > > > >> > >
>> >
>> > > > SOAPY_SDR_API void
>> > > > > >>
>> > > SoapySDRKwargs_clear(SoapySDRKwargs
>> > > > > >> > *args);
>> > > > > >> > >
>> >
>> > > > ^
>> > > > > >> > >
>> > > In file
>> > > > included from
>> > > > > >> > >
>> > > > > >>
>> > > > >
>> > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > /usr/include/SoapySDR/Types.h:132:20:
>> > > > > >> error:
>> conflicting
>> > > > > >> > types for
>> > > > > >> > >
>> >
>> > > > > ‘SoapySDRKwargsList_clear’
>> > > > > >> > >
>> >
>> > > > SOAPY_SDR_API void
>> > > > > >>
>> > > > SoapySDRKwargsList_clear(SoapySDRKwargs
>> > > > > >> > >
>> > *args, const
>> > > > > >> > >
>> > > size_t
>> > > > > >> > >
>> >
>> > > > ^
>> > > > > >> > >
>> > > In file
>> > > > included from
>> > > > > >> >
>> > > > > >>
>> > > > > /usr/local/include/SoapySDR/Device.h:18:0,
>> > > > > >> > >
>> >
>> > > > from
>> > > > > >> > >
>> > > > > >>
>> > > > >
>> > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > > /usr/local/include/SoapySDR/Types.h:138:20:
>> note:
>> > > > > >> previous
>> > > > > >> > >
>> > declaration
>> > > > > >> > >
>> > > of
>> > > > > >>
>> > > ‘SoapySDRKwargsList_clear’ was here
>> > > > > >> > >
>> >
>> > > > SOAPY_SDR_API void
>> > > > > >>
>> > > > SoapySDRKwargsList_clear(SoapySDRKwargs
>> > > > > >> > >
>> > *args, const
>> > > > > >> > >
>> > > size_t
>> > > > > >> > >
>> >
>> > > > ^
>> > > > > >> > >
>> > > In file
>> > > > included from
>> > > > > >> > >
>> > > > > >>
>> > > > >
>> > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > /usr/include/SoapySDR/Types.h:138:20:
>> > > > > >> error:
>> conflicting
>> > > > > >> > types for
>> > > > > >> > >
>> >
>> > > > ‘SoapySDRArgInfo_clear’
>> > > > > >> > >
>> >
>> > > > SOAPY_SDR_API void
>> > > > > >> >
>> > > > > >>
>> > > > > SoapySDRArgInfo_clear(SoapySDRArgInfo
>> *info);
>> > > > > >> > >
>> >
>> > > > ^
>> > > > > >> > >
>> > > In file
>> > > > included from
>> > > > > >> >
>> > > > > >>
>> > > > > /usr/local/include/SoapySDR/Device.h:18:0,
>> > > > > >> > >
>> >
>> > > > from
>> > > > > >> > >
>> > > > > >>
>> > > > >
>> > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > > /usr/local/include/SoapySDR/Types.h:144:20:
>> note:
>> > > > > >> previous
>> > > > > >> > >
>> > declaration
>> > > > > >> > >
>> > > of
>> > > > > >>
>> > ‘SoapySDRArgInfo_clear’
>> > > was here
>> > > > > >> > >
>> >
>> > > > SOAPY_SDR_API void
>> > > > > >> >
>> > > > > >>
>> > > > > SoapySDRArgInfo_clear(SoapySDRArgInfo
>> *info);
>> > > > > >> > >
>> >
>> > > > ^
>> > > > > >> > >
>> > > In file
>> > > > included from
>> > > > > >> > >
>> > > > > >>
>> > > > >
>> > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:41:0:
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > /usr/include/SoapySDR/Types.h:144:20:
>> > > > > >> error:
>> conflicting
>> > > > > >> > types for
>> > > > > >> > >
>> >
>> > > > > ‘SoapySDRArgInfoList_clear’
>> > > > > >> > >
>> >
>> > > > SOAPY_SDR_API void
>> > > > > >> >
>> > > > > >>
>> > > > > SoapySDRArgInfoList_clear(SoapySDRArgInfo
>> > > > > >> > >
>> > *info,
>> > > > > >> > >
>> > > const size_
>> > > > > >> > >
>> >
>> > > > ^
>> > > > > >> > >
>> > > In file
>> > > > included from
>> > > > > >> >
>> > > > > >>
>> > > > > /usr/local/include/SoapySDR/Device.h:18:0,
>> > > > > >> > >
>> >
>> > > > from
>> > > > > >> > >
>> > > > > >>
>> > > > >
>> > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > > /usr/local/include/SoapySDR/Types.h:150:20:
>> note:
>> > > > > >> previous
>> > > > > >> > >
>> > declaration
>> > > > > >> > >
>> > > of
>> > > > > >>
>> > > ‘SoapySDRArgInfoList_clear’ was
>> > > > here
>> > > > > >> > >
>> >
>> > > > SOAPY_SDR_API void
>> > > > > >> >
>> > > > > >>
>> > > > > SoapySDRArgInfoList_clear(SoapySDRArgInfo
>> > > > > >> > >
>> > *info,
>> > > > > >> > >
>> > > const size_
>> > > > > >> > >
>> >
>> > > > ^
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > >
>> /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:
>> > > > > >> In function
>> > > > > >> > >
>> >
>> > > > ‘rf_soapy_open_multi’:
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > >
>> > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:296:38:
>> > > > > >> > error:
>> > > > > >> > >
>> >
>> > > > initialization from
>> > > > > >> incompatible
>> > pointer type
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > [-Werror=incompatible-pointer-types]
>> > > > > >> > >
>> > > const
>> > > > SoapySDRKwargs
>> > > > > >> *soapy_args =
>> > > > > >> > >
>> > > > > SoapySDRDevice_enumerate(NULL,
>> > > > > >> > >
>> > > &length);
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > ^
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > >
>> > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:316:45:
>> > > > > >> > error:
>> > > > > >> > >
>> > passing
>> > > > > >> > >
>> >
>> > > argument 1 of
>> > > > > >>
>> > ‘SoapySDRDevice_make’ from
>> > > > incompatible
>> > > > > >> > pointer
>> type
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > [-Werror=incompatible-pointer-types]
>> > > > > >> > >
>> > >
>> > > SoapySDRDevice
>> > > > > *sdr =
>> > > > > >> >
>> > > > > SoapySDRDevice_make(&(soapy_args[0]));
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > >
>> ^
>> > > > > >> > >
>> > > In file
>> > > > included from
>> > > > > >> > >
>> > > > > >>
>> > > > >
>> > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:37:0:
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > > /usr/local/include/SoapySDR/Device.h:78:31:
>> note:
>> > > > > >> > expected
>> > ‘const
>> > > > > >> > >
>> >
>> > > > SoapySDRKwargs * {aka
>> > > > > >> const struct
>> > <anonymous>
>> > > *}’ but
>> > > > > >> > >
>> > argument
>> > > is of
>> > > > > >> > >
>> > > type ‘const
>> > > > > >> SoapySDRKwargs
>> > * {aka
>> > > const struct
>> > > > > >> >
>> > <anonymous> *}’
>> > > > > >> > >
>> >
>> > > SOAPY_SDR_API
>> > > > > >> SoapySDRDevice
>> > > > *SoapySDRDevice_make(const
>> > > > > >> > >
>> > > SoapySDRKwargs
>> > > > > >> > >
>> > > *args);
>> > > > > >> > >
>> >
>> > > > > >>
>> > > ^
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > >
>> > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:380:28:
>> > > > > >> > error:
>> > > > > >> > >
>> > invalid
>> > > > > >> > >
>> > > initializer
>> > > > > >> > >
>> > >
>> > > SoapySDRRange
>> > > > > tx_range =
>> > > > > >> > >
>> > > > > >>
>> > > > > SoapySDRDevice_getGainRange(handler->device,
>> > > > > >> > >
>> > > SOAPY_S
>> > > > > >> > >��
>> >
>> > > > > >>
>> > ^
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > >
>> > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:381:28:
>> > > > > >> > error:
>> > > > > >> > >
>> > invalid
>> > > > > >> > >
>> > > initializer
>> > > > > >> > >
>> > >
>> > > SoapySDRRange
>> > > > > rx_range =
>> > > > > >> > >
>> > > > > >>
>> > > > > SoapySDRDevice_getGainRange(handler->device,
>> > > > > >> > >
>> > > SOAPY_S
>> > > > > >> > >
>> >
>> > > > > >>
>> > ^
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > >
>> /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:
>> > > > > >> In function
>> > > > > >> > >
>> >
>> > > > > ‘rf_soapy_set_rx_srate’:
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > >
>> > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:581:29:
>> > > > > >> > error:
>> > > > > >> > >
>> >
>> > > > initialization from
>> > > > > >> incompatible
>> > pointer type
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > [-Werror=incompatible-pointer-types]
>> > > > > >> > >
>> > >
>> > > SoapySDRRange
>> > > > > *bw_range =
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > >
>> SoapySDRDevice_getBandwidthRange(handler->device,
>> > > > > >> S
>> > > > > >> > >
>> >
>> > > > > >>
>> > > ^
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > >
>> /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:
>> > > > > >> In function
>> > > > > >> > >
>> >
>> > > > > ‘rf_soapy_set_tx_srate’:
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > >
>> > /home/duo/srsLTE/lib/src/phy/rf/rf_soapy_imp.c:617:29:
>> > > > > >> > error:
>> > > > > >> > >
>> >
>> > > > initialization from
>> > > > > >> incompatible
>> > pointer type
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > [-Werror=incompatible-pointer-types]
>> > > > > >> > >
>> > >
>> > > SoapySDRRange
>> > > > > *bw_range =
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > >
>> SoapySDRDevice_getBandwidthRange(handler->device,
>> > > > > >> S
>> > > > > >> > >
>> >
>> > > > > >>
>> > > ^
>> > > > > >> > >
>> > > cc1: some
>> > > > warnings
>> > > > > being
>> > > > > >> treated as
>> errors
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > >
>> > lib/src/phy/rf/CMakeFiles/srslte_rf.dir/build.make:134:
>> > > > > >> > recipe
>> for
>> > > > > >> > >
>> > > target
>> > > > > >> > >
>> > > > > >>
>> > > > >
>> > 'lib/src/phy/rf/CMakeFiles/srslte_rf.dir/rf_soapy_imp.c.o'
>> > > > > >> > failed
>> > > > > >> > >
>> >
>> > > make[2]: ***
>> > > > > >> > >
>> > > > > >>
>> > > > >
>> > [lib/src/phy/rf/CMakeFiles/srslte_rf.dir/rf_soapy_imp.c.o]
>> > > > > >> > >
>> > > Error 1
>> > > > > >> > >
>> >
>> > > > > >>
>> > CMakeFiles/Makefile2:2905:
>> > > > recipe for
>> > > > > target
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > > 'lib/src/phy/rf/CMakeFiles/srslte_rf.dir/all'
>> > > > > >> failed
>> > > > > >> > >
>> >
>> > > make[1]: ***
>> > > > > >> >
>> > > > > >>
>> > > > >
>> [lib/src/phy/rf/CMakeFiles/srslte_rf.dir/all]
>> > > > > >> Error 2
>> > > > > >> > >
>> >
>> > > Makefile:160:
>> > > > > recipe for
>> > > > > >> target 'all'
>> failed
>> > > > > >> > >
>> > > make: ***
>> > > > [all] Error 2
>> > > > > >> > >
>> >
>> > > > > >> > >
>> >
>> > > > > >> > >
>> > > Please
>> > > > advise! Thanks
>> > > > > >> > >
>> > > --
>> > > > > >> > >
>> > > Best
>> > > Regards,
>> > > > > >> > >
>> > > DUO
>> > > > > >> > >
>> >
>> > > > > >> > >
>> >
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > >
>> _______________________________________________
>> > > > > >> > >
>> >
>> > > srslte-users
>> > > > > mailing list
>> > > > > >> > >
>> >
>> > > > > >>
>> > > > > srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>
>> > > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>>
>> > > > >
>> > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>
>> > > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>>>
>> > > > >
>> > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>
>> > > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>>
>> > > > >
>> > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>
>> > > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>>>>
>> > > > > >> >
>> > > > > >>
>> > > > >
>> > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>
>> > > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>>
>> > > > >
>> > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>
>> > > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>>>
>> > > > > >>
>> > > > >
>> > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>
>> > > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>>
>> > > > >
>> > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>
>> > > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>>>>>
>> > > > > >> > >
>> > > > > >>
>> > > > >
>> > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>
>> > > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>>
>> > > > >
>> > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>
>> > > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>>>
>> > > > > >>
>> > > > >
>> > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>
>> > > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>>
>> > > > >
>> > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>
>> > > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>>>>
>> > > > > >> >
>> > > > > >>
>> > > > >
>> > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>
>> > > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>>
>> > > > >
>> > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>
>> > > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>>>
>> > > > > >>
>> > > > >
>> > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>
>> > > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>>
>> > > > >
>> > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>
>> > > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>>>>>>
>> > > > > >> > >
>> >
>> > > > > >> >
>> > > > > >>
>> > > > >
>> > > >
>> > >
>> >
>> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
>> > > > > >> > >
>> >
>> > > > > >> > >
>> > > > > >> > >
>> > > > > >> > >
>> > > > > >> > > --
>> > > > > >> > >
>> > Best Regards,
>> > > > > >> > >
>> Sandi
>> > > > > >> > >
>> > > > > >> > >
>> > > > > >> > >
>> > > > > >> > > --
>> > > > > >> > > Best
>> > Regards,
>> > > > > >> > > Sandi
>> > > > > >> > >
>> > > > > >> >
>> > > > > >> >
>> > > > > >> > --
>> > > > > >> > Andre
>> > Puschmann
>> > > > > >> >
>> > > > > >> > Software
>> > Radio
>> > > Systems (SRS)
>> > > > > >> >
>> > > > http://www.softwareradiosystems.com
>> > > > > >> >
>> > > > > >> > PGP/GnuPG
>> > key: 6C42AB31
>> > > > > >> >
>> > fingerprint: 137A AE49
>> > > > 785B A445
>> > > > > >> 257C 8AD7 D877
>> > A498 6C42 AB31
>> > > > > >> >
>> > > > > >> >
>> > > > > >> >
>> > > > > >> > --
>> > > > > >> > Best Regards,
>> > > > > >> > Sandi
>> > > > > >> >
>> > > > > >>
>> > > > > >>
>> > > > > >> --
>> > > > > >> Andre Puschmann
>> > > > > >>
>> > > > > >> Software Radio
>> > Systems (SRS)
>> > > > > >>
>> > > http://www.softwareradiosystems.com
>> > > > > >>
>> > > > > >> PGP/GnuPG key:
>> > 6C42AB31
>> > > > > >> fingerprint:
>> > 137A AE49 785B
>> > > > A445 257C
>> > > > > 8AD7
>> > > > > >> D877 A498 6C42
>> AB31
>> > > > > >>
>> > > > > >>
>> > > > > >>
>> > > > > >> --
>> > > > > >> Best Regards,
>> > > > > >> Sandi
>> > > > > >>
>> > > > > >>
>> > > > > >>
>> > > > > >> --
>> > > > > >> Best Regards,
>> > > > > >> Sandi
>> > > > > >>
>> > > > > >>
>> > > > > >>
>> > > > _______________________________________________
>> > > > > >> srslte-users mailing
>> list
>> > > > > >>
>> > > > srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>
>> > > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>>
>> > > > >
>> > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>
>> > > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>>>
>> > > > >
>> > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>
>> > > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>>
>> > > > >
>> > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>
>> > > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>>>>
>> > > > > >>
>> > > > >
>> > >
>> >
>> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
>> > > > > >
>> > > > _______________________________________________
>> > > > > > srslte-users mailing
>> list
>> > > > > >
>> > > > srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>
>> > > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>>
>> > > > >
>> > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>
>> > > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>>>
>> > > > > >
>> > > > >
>> > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>
>> > > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>>
>> > > > >
>> > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>
>> > > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>>>>
>> > > > > >
>> > > > >
>> > >
>> >
>> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
>> > > > > >
>> > > > > >
>> > > > > >
>> > > > > > --
>> > > > > > Best Regards,
>> > > > > > Sandi
>> > > > > >
>> > > > > >
>> > > _______________________________________________
>> > > > > > srslte-users mailing list
>> > > > > >
>> > > srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>
>> > > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>>
>> > > > >
>> > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>
>> > > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>>>
>> > > > > >
>> > > > <mailto:
>> srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>
>> > > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>>
>> > > > >
>> > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>
>> > > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>>>>
>> > > > > >
>> > > > >
>> > >
>> >
>> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
>> > > > > >
>> > > > > >
>> > > > > >
>> _______________________________________________
>> > > > > > srslte-users mailing list
>> > > > > > srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>
>> > > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>>
>> > > > >
>> > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>
>> > > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>>>
>> > > > > >
>> > > >
>> >
>> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
>> > > > > >
>> > > > >
>> > > > >
>> > > > >
>> > > > > --
>> > > > > Best Regards,
>> > > > > Sandi
>> > > > >
>> > > > >
>> > > > > _______________________________________________
>> > > > > srslte-users mailing list
>> > > > > srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>
>> > > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>
>> > > <mailto:srslte-users at lists.softwareradiosystems.com
>> > <mailto:srslte-users at lists.softwareradiosystems.com>>>
>> > > > >
>> > >
>> >
>> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
>> > > > >
>> > > >
>> > > >
>> > > > --
>> > > > Andre Puschmann
>> > > >
>> > > > Software Radio Systems (SRS)
>> > > > http://www.softwareradiosystems.com
>> > > >
>> > > > PGP/GnuPG key: 6C42AB31
>> > > > fingerprint: 137A AE49 785B A445 257C 8AD7 D877 A498
>> > 6C42 AB31
>> > > >
>> > > >
>> > > >
>> > > > --
>> > > > Best Regards,
>> > > > Sandi
>> > > >
>> > >
>> > >
>> > > --
>> > > Andre Puschmann
>> > >
>> > > Software Radio Systems (SRS)
>> > > http://www.softwareradiosystems.com
>> > >
>> > > PGP/GnuPG key: 6C42AB31
>> > > fingerprint: 137A AE49 785B A445 257C 8AD7 D877 A498 6C42
>> AB31
>> > >
>> > >
>> > >
>> > > --
>> > > Best Regards,
>> > > Sandi
>> > >
>> >
>> >
>> > --
>> > Andre Puschmann
>> >
>> > Software Radio Systems (SRS)
>> > http://www.softwareradiosystems.com
>> >
>> > PGP/GnuPG key: 6C42AB31
>> > fingerprint: 137A AE49 785B A445 257C 8AD7 D877 A498 6C42 AB31
>> >
>> >
>> >
>> > --
>> > Best Regards,
>> > Sandi
>> >
>> >
>> >
>> > --
>> > Best Regards,
>> > Sandi
>> >
>>
>>
>> --
>> Andre Puschmann
>>
>> Software Radio Systems (SRS)
>> http://www.softwareradiosystems.com
>>
>> PGP/GnuPG key: 6C42AB31
>> fingerprint: 137A AE49 785B A445 257C 8AD7 D877 A498 6C42 AB31
>>
>
>
> --
> Best Regards,
> Sandi
>
>
--
Best Regards,
Sandi
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20181110/3f2c619f/attachment.htm>
More information about the srsran-users
mailing list