[srslte-users] ENB: Invalid Cell Parameters and Error Parsing Cell Info

[Andre Puschmann]

Can you post all your config files, please? Does it work with the default ones?

On November 30, 2018 4:14:36 AM GMT+01:00, devifr <devifr at gmail.com> wrote:
>I'm having the following error when I attempt to run *sudo srsenb *with
>a
>Mini B200*:*
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>*[INFO] [UHD] linux; GNU C++ version 7.3.0; Boost_106501;
>UHD_3.13.0.1-releaseOpening USRP with args:
>type=b200,master_clock_rate=30.72e6[INFO] [B200] Detected Device:
>B200mini[INFO] [B200] Operating over USB 3.[INFO] [B200] Initialize
>CODEC
>control...[INFO] [B200] Initialize Radio control...[INFO] [B200]
>Performing
>register loopback test... [INFO] [B200] Register loopback test
>passed[INFO]
>[B200] Asking for clock rate 30.720000 MHz... [INFO] [B200] Actually
>got
>clock rate 30.720000 MHz.Setting frequency: DL=1878.0 Mhz, UL=1783.0
>MHzInvalid cell parameters: nof_prb=100, cell_id=255Error parsing Cell
>configuration*
>
>I've attempted to run the srsenb with all of the various resource
>blocks.
>I've had the same error message on all attempts.  I've tried different
>DL
>channel numbers for different bands.  All ending up with the same
>errors
>(the last two lines) as above.  The enb.log only displays the
>following:
>
>*Built in Release mode using commit 1c015aab on branch master.*
>
>Any suggestions?
>Thanks.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20181130/3d958780/attachment.htm>