[srslte-users] Failed to run srsUE on bladerf x40

[Andre Puschmann]

Hey,

just copy+paste from your mail which already contains the answer:

"AGC commands for FPGA v0.7.3 are incompatible with this version of
libbladeRF. Please update to FPGA v0.8.0 or newer to use AGC."

Cheers
Andre

On 01/10/18 18:25, Mohamed Kassem wrote:
> Hi all,
> 
> I was trying to run srsUE on bladerf x40, however, I received the
> following warnings and errors:
> =================================
> Opening bladeRF...
> [WARNING @ host/libraries/libbladeRF/src/board/bladerf1/bladerf1.c:618]
> AGC commands for FPGA v0.7.3 are incompatible with this version of
> libbladeRF. Please update to FPGA v0.8.0 or newer to use AGC.
> set continuous no
> Failed to configure RX sync interface: Invalid operation or parameter
> RX failed: Invalid operation or parameter
> 
> SYNC:  Receiving from radio while in IDLE_RX
> RX failed: Invalid operation or parameter
> 
> SYNC:  Receiving from radio while in IDLE_RX
> RX failed: Invalid operation or parameter
> 
> SYNC:  Receiving from radio while in IDLE_RX
> RX failed: Invalid operation or parameter
> 
> SYNC:  Receiving from radio while in IDLE_RX
> RX failed: Invalid operation or parameter
> 
> SYNC:  Receiving from radio while in IDLE_RX
> RX failed: Invalid operation or parameter
> ======================================
> Your support is highly appreciated to solve this problem.
> 
> Thanks,
> Mohamed
> 
>