[srslte-users] [ERROR] [X300] 19.1.44.2: x300 fw communication failure #3
Diarmuid Collins
dcollin5 at tcd.ie
Wed Dec 4 11:01:57 UTC 2019
Hi Guys
I see the below error a lot.
[ERROR] [X300] 19.1.44.2<http://19.1.44.2>: x300 fw communication failure #3
EnvironmentError: IOError: x300 fw poke32 - reply timed out
Any idea why?
Ubuntu 19.10 and UHD_3.15.0.0-25-g035292d8
Connection between the UE and eNB works intermittently. Its not very reliable however
Best regards
tcdforge at x310rx:~$ sudo srsue
Reading configuration file /etc/srslte/ue.conf...
Built in Release mode using commit c2de0c67 on branch master.
Opening 1 RF devices with 1 RF channels...
[INFO] [UHD] linux; GNU C++ version 9.2.1 20191008; Boost_106700; UHD_3.15.0.0-25-g035292d8
[INFO] [LOGGING] Fastpath logging disabled at runtime.
Opening USRP with args: type=x300,master_clock_rate=184.32e6
[INFO] [X300] X300 initialization sequence...
[INFO] [X300] Maximum frame size: 1472 bytes.
[INFO] [X300] Radio 1x clock: 184.32 MHz
[INFO] [GPS] Found an internal GPSDO: LC_XO, Firmware Rev 0.929a
[INFO] [0/DmaFIFO_0] Initializing block control (NOC ID: 0xF1F0D00000000000)
[INFO] [0/DmaFIFO_0] BIST passed (Throughput: 1318 MB/s)
[INFO] [0/DmaFIFO_0] BIST passed (Throughput: 1292 MB/s)
[INFO] [0/Radio_0] Initializing block control (NOC ID: 0x12AD100000000001)
[INFO] [0/Radio_1] Initializing block control (NOC ID: 0x12AD100000000001)
[INFO] [0/DDC_0] Initializing block control (NOC ID: 0xDDC0000000000000)
[INFO] [0/DDC_1] Initializing block control (NOC ID: 0xDDC0000000000000)
[INFO] [0/DUC_0] Initializing block control (NOC ID: 0xD0C0000000000000)
[INFO] [0/DUC_1] Initializing block control (NOC ID: 0xD0C0000000000000)
Waiting PHY to initialize ... done!
Attaching UE...
Searching cell in DL EARFCN=3400, f_dl=2685.0 MHz, f_ul=2565.0 MHz
.
Found Cell: Mode=FDD, PCI=1, PRB=25, Ports=1, CFO=-0.2 KHz
Found PLMN: Id=00101, TAC=7
Random Access Transmission: seq=11, ra-rnti=0x2
[ERROR] [X300] 19.1.44.2<http://19.1.44.2>: x300 fw communication failure #1
EnvironmentError: IOError: x300 fw poke32 - reply timed out
[ERROR] [X300] 19.1.44.2<http://19.1.44.2>: x300 fw communication failure #2
EnvironmentError: IOError: x300 fw poke32 - reply timed out
[ERROR] [X300] 19.1.44.2<http://19.1.44.2>: x300 fw communication failure #3
EnvironmentError: IOError: x300 fw poke32 - reply timed out
[ERROR] [UHD] An unexpected exception was caught in a task loop.The task loop will now exit, things may not work.EnvironmentError: IOError: 19.1.44.2<http://19.1.44.2>: x300 fw communication failure #3
EnvironmentError: IOError: x300 fw poke32 - reply timed out
tcdforge at x310rx:~$ uhd_usrp_probe
[INFO] [UHD] linux; GNU C++ version 9.2.1 20191008; Boost_106700; UHD_3.15.0.0-25-g035292d8
[INFO] [X300] X300 initialization sequence...
[INFO] [X300] Maximum frame size: 1472 bytes.
[INFO] [X300] Radio 1x clock: 200 MHz
[INFO] [GPS] Found an internal GPSDO: LC_XO, Firmware Rev 0.929a
[WARNING] [GPS] update_cache: Malformed GPSDO string: LC_XO, Firmware Rev 0.929a
[INFO] [0/DmaFIFO_0] Initializing block control (NOC ID: 0xF1F0D00000000000)
[INFO] [0/DmaFIFO_0] BIST passed (Throughput: 1313 MB/s)
[INFO] [0/DmaFIFO_0] BIST passed (Throughput: 1318 MB/s)
[INFO] [0/Radio_0] Initializing block control (NOC ID: 0x12AD100000000001)
[INFO] [0/Radio_1] Initializing block control (NOC ID: 0x12AD100000000001)
[INFO] [0/DDC_0] Initializing block control (NOC ID: 0xDDC0000000000000)
[INFO] [0/DDC_1] Initializing block control (NOC ID: 0xDDC0000000000000)
[INFO] [0/DUC_0] Initializing block control (NOC ID: 0xD0C0000000000000)
[INFO] [0/DUC_1] Initializing block control (NOC ID: 0xD0C0000000000000)
_____________________________________________________
/
| Device: X-Series Device
| _____________________________________________________
| /
| | Mboard: X310
| | revision: 8
| | revision_compat: 7
| | product: 30815
| | mac-addr0: 00:80:2f:25:d1:e5
| | mac-addr1: 00:80:2f:25:d1:e6
| | gateway: 192.168.10.1
| | ip-addr0: 19.1.44.2
| | subnet0: 255.255.255.0
| | ip-addr1: 192.168.20.2
| | subnet1: 255.255.255.0
| | ip-addr2: 192.168.30.2
| | subnet2: 255.255.255.0
| | ip-addr3: 192.168.40.2
| | subnet3: 255.255.255.0
| | serial: 30EAB83
| | FW Version: 6.0
| | FPGA Version: 36.0
| | FPGA git hash: ce49fcb
| | RFNoC capable: Yes
| |
| | Time sources: internal, external, gpsdo
| | Clock sources: internal, external, gpsdo
| | Sensors: gps_gpgga, gps_gprmc, gps_time, gps_locked, gps_servo, ref_locked
| | _____________________________________________________
| | /
| | | RX Dboard: A
| | | ID: SBX-120 (0x0083)
| | | Serial: 30DFA56
| | | _____________________________________________________
| | | /
| | | | RX Frontend: 0
| | | | Name: SBX-120 RX
| | | | Antennas: TX/RX, RX2, CAL
| | | | Sensors: lo_locked
| | | | Freq range: 400.000 to 4400.000 MHz
| | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB
| | | | Bandwidth range: 120000000.0 to 120000000.0 step 0.0 Hz
| | | | Connection Type: IQ
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | RX Codec: A
| | | | Name: ads62p48
| | | | Gain range digital: 0.0 to 6.0 step 0.5 dB
| | _____________________________________________________
| | /
| | | RX Dboard: B
| | | ID: SBX-120 (0x0083)
| | | Serial: 30DFA63
| | | _____________________________________________________
| | | /
| | | | RX Frontend: 0
| | | | Name: SBX-120 RX
| | | | Antennas: TX/RX, RX2, CAL
| | | | Sensors: lo_locked
| | | | Freq range: 400.000 to 4400.000 MHz
| | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB
| | | | Bandwidth range: 120000000.0 to 120000000.0 step 0.0 Hz
| | | | Connection Type: IQ
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | RX Codec: B
| | | | Name: ads62p48
| | | | Gain range digital: 0.0 to 6.0 step 0.5 dB
| | _____________________________________________________
| | /
| | | TX Dboard: A
| | | ID: SBX-120 (0x0082)
| | | Serial: 30DFA56
| | | _____________________________________________________
| | | /
| | | | TX Frontend: 0
| | | | Name: SBX-120 TX
| | | | Antennas: TX/RX, CAL
| | | | Sensors: lo_locked
| | | | Freq range: 400.000 to 4400.000 MHz
| | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB
| | | | Bandwidth range: 120000000.0 to 120000000.0 step 0.0 Hz
| | | | Connection Type: QI
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | TX Codec: A
| | | | Name: ad9146
| | | | Gain Elements: None
| | _____________________________________________________
| | /
| | | TX Dboard: B
| | | ID: SBX-120 (0x0082)
| | | Serial: 30DFA63
| | | _____________________________________________________
| | | /
| | | | TX Frontend: 0
| | | | Name: SBX-120 TX
| | | | Antennas: TX/RX, CAL
| | | | Sensors: lo_locked
| | | | Freq range: 400.000 to 4400.000 MHz
| | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB
| | | | Bandwidth range: 120000000.0 to 120000000.0 step 0.0 Hz
| | | | Connection Type: QI
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | TX Codec: B
| | | | Name: ad9146
| | | | Gain Elements: None
| | _____________________________________________________
| | /
| | | RFNoC blocks on this device:
| | |
| | | * DmaFIFO_0
| | | * Radio_0
| | | * Radio_1
| | | * DDC_0
| | | * DDC_1
| | | * DUC_0
| | | * DUC_1
tcdforge at x310rx:~$
-------------------------------------------------------------------
Diarmuid Collins PhD
Iris Testbed Manager,
CONNECT Centre for Future Networks,
Dunlop Oriel House,
Trinity College,
Dublin 2, Ireland
E: dcollin5 at tcd.ie<mailto:dcollin5 at tcd.ie>
W:https://connectcentre.ie/people/diarmuid-collins/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20191204/11200bb5/attachment.htm>
More information about the srsran-users
mailing list