[srslte-users] NO RECEPTION OF LTE SIGNAL ON COMMERCIAL MOBILE

Fri Dec 27 13:32:32 UTC 2019

Hi everyone.
I am using USRP B210 for srsLTE, how ever both EPC and eNB seems to be
working fine still am unable to detect any signal on my mobile. could
anyone pls suggest any solution.
n_prb is set as 50.
pls help out.
thanks.

---  Software Radio Systems EPC  ---

Reading configuration file /home/esb3283/.config/srslte/epc.conf...
HSS Initialized.
MME S11 Initialized
MME GTP-C Initialized
MME Initialized. MCC: 0xf404, MNC: 0xff64
SPGW GTP-U Initialized.
SPGW S11 Initialized.
SP-GW Initialized.
Received S1 Setup Request.
S1 Setup Request - eNB Name: srsenb01, eNB id: 0x19b
S1 Setup Request - MCC:404, MNC:64, PLMN: 324678
S1 Setup Request - TAC 7, B-PLMN 0
S1 Setup Request - Paging DRX 2
Sending S1 Setup Response

Built in Release mode using commit 0e89fa9f on branch master.

---  Software Radio Systems LTE eNodeB  ---

Reading configuration file /home/esb3283/.config/srslte/enb.conf...
Opening 1 RF devices with 1 RF channels...
[INFO] [UHD] linux; GNU C++ version 8.3.0; Boost_106700;
UHD_3.14.1.0-release
[INFO] [LOGGING] Fastpath logging disabled at runtime.
Opening USRP with args: type=b200,master_clock_rate=23.04e6
[INFO] [B200] Detected Device: B210
[INFO] [B200] Operating over USB 2.
[INFO] [B200] Initialize CODEC control...
[INFO] [B200] Initialize Radio control...
[INFO] [B200] Performing register loopback test...
[INFO] [B200] Register loopback test passed
[INFO] [B200] Performing register loopback test...
[INFO] [B200] Register loopback test passed
[INFO] [B200] Asking for clock rate 23.040000 MHz...
[INFO] [B200] Actually got clock rate 23.040000 MHz.
Setting frequency: DL=2145.0 Mhz, UL=1745.0 MHz
Setting Sampling frequency 11.52 MHz

==== eNodeB started ===
Type <t> to view trace
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20191227/376e9a29/attachment.htm>