[srslte-users] No reception of srsLTE signal on mobile

[Arun Pundir ee18m009]

Thanks alot for your reply.
Yes I have changed the earcn based on my mobile only. Can you confirm any
earcn and corresponding mobile for which you would have checked. what
should i check or change if the current enb and epc running screen shows...
pls help out.







Built in Release mode using commit 0e89fa9f on branch master.

---  Software Radio Systems LTE eNodeB  ---

Reading configuration file /home/esb3283/.config/srslte/enb.conf...
Opening 1 RF devices with 1 RF channels...
[INFO] [UHD] linux; GNU C++ version 8.3.0; Boost_106700;
UHD_3.14.1.0-release
[INFO] [LOGGING] Fastpath logging disabled at runtime.
Opening USRP with args: type=b200,master_clock_rate=23.04e6
[INFO] [B200] Detected Device: B210
[INFO] [B200] Operating over USB 2.
[INFO] [B200] Initialize CODEC control...
[INFO] [B200] Initialize Radio control...
[INFO] [B200] Performing register loopback test...
[INFO] [B200] Register loopback test passed
[INFO] [B200] Performing register loopback test...
[INFO] [B200] Register loopback test passed
[INFO] [B200] Asking for clock rate 23.040000 MHz...
[INFO] [B200] Actually got clock rate 23.040000 MHz.
Setting frequency: DL=2110.0 Mhz, UL=1920.0 MHz
Setting Sampling frequency 11.52 MHz

==== eNodeB started ===
Type <t> to view trace
t
Enter t to stop trace.
RF status: O=85, U=83, L=2328
RF status: O=84, U=85, L=2307
RF status: O=84, U=83, L=2322
RF status: O=84, U=85, L=2298
RF status: O=85, U=86, L=2292
RF status: O=84, U=85, L=2298
---------------------------------------------------------------------------------------------------------------------
sudo srsepc
Built in Release mode using commit 0e89fa9f on branch master.


---  Software Radio Systems EPC  ---

Reading configuration file /home/esb3283/.config/srslte/epc.conf...
HSS Initialized.
MME S11 Initialized
MME GTP-C Initialized
MME Initialized. MCC: 0xf404, MNC: 0xff26
SPGW GTP-U Initialized.
SPGW S11 Initialized.
SP-GW Initialized.
Received S1 Setup Request.
S1 Setup Request - eNB Name: srsenb01, eNB id: 0x19b
S1 Setup Request - MCC:404, MNC:26, PLMN: 324706
S1 Setup Request - TAC 7, B-PLMN 0
S1 Setup Request - Paging DRX 2
Sending S1 Setup Response
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20191228/e6dd5dc3/attachment.htm>