[srslte-users] NO RECEPTION OF LTE SIGNAL ON COMMERCIAL MOBILE

[Arun Pundir ee18m009]

thanks John for reply.
but sim is required for connecting the network, i am not any LTE RF signal
on my mobile on search eventhough am using general LTE SIM , i will program
SIM only if am sure the the SDR is giving LTE signal.
I have seen many ppl on the thread have raised similar issue but non have
been answered.
kindly help out . thanks.

On Sun, Dec 29, 2019 at 6:39 AM john wu <john.wu.8899 at hotmail.com> wrote:

> Hi Arun,
> do you set the sim card correct?
> there is a link for how to config the sim card:
> http://zhixun-wireless.top/install-and-configure-srslte-enb-epc-on-ubuntu
>
>
> www.zhixun-wireless.top
> provide SDR PA LNA duplexer
>
> Best Regards
>
> ------------------------------
> *From:* srslte-users <srslte-users-bounces at lists.softwareradiosystems.com>
> on behalf of Arun Pundir ee18m009 <ee18m009 at smail.iitm.ac.in>
> *Sent:* Friday, December 27, 2019 21:32
> *To:* srslte-users at lists.softwareradiosystems.com <
> srslte-users at lists.softwareradiosystems.com>
> *Subject:* [srslte-users] NO RECEPTION OF LTE SIGNAL ON COMMERCIAL MOBILE
>
> Hi everyone.
> I am using USRP B210 for srsLTE, how ever both EPC and eNB seems to be
> working fine still am unable to detect any signal on my mobile. could
> anyone pls suggest any solution.
> n_prb is set as 50.
> pls help out.
> thanks.
>
>
>
>
> ---  Software Radio Systems EPC  ---
>
> Reading configuration file /home/esb3283/.config/srslte/epc.conf...
> HSS Initialized.
> MME S11 Initialized
> MME GTP-C Initialized
> MME Initialized. MCC: 0xf404, MNC: 0xff64
> SPGW GTP-U Initialized.
> SPGW S11 Initialized.
> SP-GW Initialized.
> Received S1 Setup Request.
> S1 Setup Request - eNB Name: srsenb01, eNB id: 0x19b
> S1 Setup Request - MCC:404, MNC:64, PLMN: 324678
> S1 Setup Request - TAC 7, B-PLMN 0
> S1 Setup Request - Paging DRX 2
> Sending S1 Setup Response
>
>
> Built in Release mode using commit 0e89fa9f on branch master.
>
> ---  Software Radio Systems LTE eNodeB  ---
>
> Reading configuration file /home/esb3283/.config/srslte/enb.conf...
> Opening 1 RF devices with 1 RF channels...
> [INFO] [UHD] linux; GNU C++ version 8.3.0; Boost_106700;
> UHD_3.14.1.0-release
> [INFO] [LOGGING] Fastpath logging disabled at runtime.
> Opening USRP with args: type=b200,master_clock_rate=23.04e6
> [INFO] [B200] Detected Device: B210
> [INFO] [B200] Operating over USB 2.
> [INFO] [B200] Initialize CODEC control...
> [INFO] [B200] Initialize Radio control...
> [INFO] [B200] Performing register loopback test...
> [INFO] [B200] Register loopback test passed
> [INFO] [B200] Performing register loopback test...
> [INFO] [B200] Register loopback test passed
> [INFO] [B200] Asking for clock rate 23.040000 MHz...
> [INFO] [B200] Actually got clock rate 23.040000 MHz.
> Setting frequency: DL=2145.0 Mhz, UL=1745.0 MHz
> Setting Sampling frequency 11.52 MHz
>
> ==== eNodeB started ===
> Type <t> to view trace
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20191229/2f74a2c3/attachment.htm>