[srslte-users] RES: RES: Radio link failure with srsLTE on Nvidia Jetson TX2
Justin Tallon
justin.tallon at softwareradiosystems.com
Wed Feb 6 14:32:10 UTC 2019
Hey Sindi,
Can you run: /usr/bin/c++ -v and tell post the output?
Thanks,
Justin
____
Justin Tallon Ph.D.
Software Radio Systems (SRS)
http://www.softwareradiosystems.com
+353-86-067-0753 | justin.tallon at softwareradiosystems.com
On Wed, Feb 6, 2019 at 12:34 PM Andre Puschmann <
andre.puschmann at softwareradiosystems.com> wrote:
> On 4/2/19 20:45, JOSE SINDI YAMAMOTO wrote:
> > Hi Justin,
> >
> >
> >
> > OK. Please, let me know when this is fixed. Thank you very much. Best
> > regards, Sindi.
> >
>
> Hey,
>
> we've pushed a fix to the "aarch_fix" branch. Give it a try.
>
> Thanks
> Andre
>
>
> >
> >
> > *De:* Justin Tallon <justin.tallon at softwareradiosystems.com>
> > *Enviada em:* segunda-feira, 4 de fevereiro de 2019 14:55
> > *Para:* JOSE SINDI YAMAMOTO <sindi at innovatechtelecom.com>
> > *Cc:* Sabur Hassan Baidya <sbaidya at uci.edu>; srslte-users
> > <srslte-users at lists.softwareradiosystems.com>
> > *Assunto:* Re: [srslte-users] RES: Radio link failure with srsLTE on
> > Nvidia Jetson TX2
> >
> >
> >
> > Hey Sindi,
> >
> >
> >
> > I think the issue is these flags are not needed to activate neon in
> > aarch64, it is activated automatically. We will push a fix for this in
> > the cmake soon.
> >
> >
> >
> > Thanks,
> > Justin.
> >
> >
> > ____
> > Justin Tallon Ph.D.
> >
> > Software Radio Systems (SRS)
> > http://www.softwareradiosystems.com <
> http://www.softwareradiosystems.com/>
> >
> > +353-86-067-0753 | justin.tallon at softwareradiosystems.com
> > <mailto:justin.tallon at softwareradiosystems.com>
> >
> >
> >
> >
> >
> > On Mon, Feb 4, 2019 at 5:33 PM JOSE SINDI YAMAMOTO
> > <sindi at innovatechtelecom.com <mailto:sindi at innovatechtelecom.com>>
> wrote:
> >
> > Hi Justin!
> >
> >
> >
> > Thank you very much for your reply. Attached are the full cmake
> > output and make output with VERBOSE=1. Best regards, Sindi.
> >
> >
> >
> > *De:* Justin Tallon <justin.tallon at softwareradiosystems.com
> > <mailto:justin.tallon at softwareradiosystems.com>>
> > *Enviada em:* segunda-feira, 4 de fevereiro de 2019 12:32
> > *Para:* JOSE SINDI YAMAMOTO <sindi at innovatechtelecom.com
> > <mailto:sindi at innovatechtelecom.com>>
> > *Cc:* Sabur Hassan Baidya <sbaidya at uci.edu
> > <mailto:sbaidya at uci.edu>>; srslte-users
> > <srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>>
> > *Assunto:* Re: [srslte-users] RES: Radio link failure with srsLTE on
> > Nvidia Jetson TX2
> >
> >
> >
> > Hey Sindi,
> >
> >
> > Can you send on the full cmake output and also the make output with
> > VERBOSE=1 ?
> >
> >
> >
> > Thanks,
> > Justin
> >
> > ____
> > Justin Tallon Ph.D.
> >
> > Software Radio Systems (SRS)
> > http://www.softwareradiosystems.com
> > <http://www.softwareradiosystems.com/>
> >
> > +353-86-067-0753 | justin.tallon at softwareradiosystems.com
> > <mailto:justin.tallon at softwareradiosystems.com>
> >
> >
> >
> >
> >
> > On Mon, Feb 4, 2019 at 11:13 AM JOSE SINDI YAMAMOTO
> > <sindi at innovatechtelecom.com <mailto:sindi at innovatechtelecom.com>>
> > wrote:
> >
> > Hi everybody!
> >
> >
> >
> > I tried to compile the last version of srsLTE (srsLTE 18.12) on
> > NVIDIA Jetson TX2 board with USRP B210 radio interface. I got
> > the errors in annex. Anyone have any idea what the problem might
> > be? Thank you very much and best regards, Sindi.
> >
> >
> >
> > *De:* srslte-users
> > <srslte-users-bounces at lists.softwareradiosystems.com
> > <mailto:srslte-users-bounces at lists.softwareradiosystems.com>>
> > *Em nome de *Sabur Hassan Baidya
> > *Enviada em:* quarta-feira, 30 de janeiro de 2019 18:50
> > *Para:* srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>
> > *Assunto:* [srslte-users] Radio link failure with srsLTE on
> > Nvidia Jetson TX2
> >
> >
> >
> > Hi,
> >
> >
> >
> > I was trying to test the srsLTE on NVIDIA Jetson TX2 board with
> > USRP B210 radio interface. However, I have problems in
> > installing the latest version of srsLTE and could not
> > successfully install. As suggested in some thread that the
> > latest version has some problems with ARM processors, I tried
> > with srsLTE-release_18_03_1 version and was able to
> > successfully install on the Jetson board.
> >
> >
> >
> > However, when I start the EPC and ENB, I see only the TX radio
> > active (with red light on) but not the RX. Then when I try to
> > start a srsUE from another board, it does not connect as it does
> > Random Access Transmission and occasionally prints : "Warning:
> > Detected Radio-Link Failure". I tried disconnecting USRP and
> > reconnecting but got same errors.
> >
> >
> >
> > But the same srsUE (on same board) works with a srsENB which
> > runs on laptop running ubuntu and latest srsLTE code. On the
> > laptop when I run EPC and ENB code, I can see both the TX and RX
> > radio active with red and green lights on the USRP.
> >
> >
> >
> > Did someone try srsLTE on Jetson board and made it work
> > successfully? Can someone please guide me to find out the
> > problem and resolve.
> >
> >
> >
> > Thanks & Regards,
> >
> > Sabur
> >
> >
> >
> > _______________________________________________
> > srslte-users mailing list
> > srslte-users at lists.softwareradiosystems.com
> > <mailto:srslte-users at lists.softwareradiosystems.com>
> >
> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
> >
> >
> >
> > ------------------------------------------------------------------------
> > Logotipo da AVG <http://www.avg.com/internet-security>
> >
> > Este email foi verificado quanto a vírus pelo software AVG AntiVirus.
> > www.avg.com <http://www.avg.com/internet-security>
> >
> >
> > <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
> >
> > _______________________________________________
> > srslte-users mailing list
> > srslte-users at lists.softwareradiosystems.com
> > http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20190206/6416c61f/attachment.htm>
More information about the srsran-users
mailing list