[srslte-users] srsLTE and bladeRF x40 problems

[Ernesto Xload]

Hello,

I've 5c088d75 on branch master srsLTE github version with a bladeRF x40 and
it runs, but I cand not see the new network from my mobile phone.

My bladeRF is 2.3.2 firmware version and 0.10.2 FPGA version.

My srsepc output:

Built in Release mode using commit 5c088d75 on branch master.


---  Software Radio Systems EPC  ---

Reading configuration file /media/ramdisk/epc.conf...
HSS Initialized.
MME GTP-C Initialized
MME Initialized. MCC: 0xf901, MNC: 0xff70
SP-GW Initialized.
Received S1 Setup Request.
S1 Setup Request - eNB Name: srsenb01, eNB id: 0x19b
S1 Setup Request - MCC:901, MNC:70, PLMN: 651527
S1 Setup Request - TAC 7, B-PLMN 0
S1 Setup Request - Paging DRX 2
Sending S1 Setup Response

My srsenb output:
Built in Release mode using commit 5c088d75 on branch master.

---  Software Radio Systems LTE eNodeB  ---

Reading configuration file /media/ramdisk/enb.conf...
Opening bladeRF...
Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
Setting frequency: DL=1869.9 Mhz, UL=1774.9 MHz
set TX frequency to 1869900032
set RX frequency to 1774899968
Setting Sampling frequency 11.52 MHz
Set RX sampling rate 11.52 Mhz, filter BW: 10.00 Mhz

==== eNodeB started ===
Type <t> to view trace

Can anybody help me?

Best regards and a lot of thanks in advance.

Ernesto a.k.a. Xload
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20190228/d2b6056b/attachment.htm>