[srslte-users] srsUE not able to connect to the internet

[Nehemiah Chan]

Hi Justin,

The SIM cards being used at the moment is from sysmocom sjs1-4ff. The
configurations from the user_db.csv are similar to the configurations in
the USIM card configurations. I was wondering if there are specific methods
to troubleshoot.

Best Regards,
Nehemiah

On Tue, Jul 16, 2019 at 4:08 PM Justin Tallon <
justin.tallon at softwareradiosystems.com> wrote:

> Hey Nehemiah,
>
> What SIM card are you using? In order to attach properly to the network,
> you need to have a test SIM of some sort and supply the IMSI of this SIM to
> the EPC using the user_db.csv.
>
> Regards,
> Justin
> ____
> Justin Tallon Ph.D.
>
> Software Radio Systems (SRS)
> http://www.softwareradiosystems.com
>
> +353-86-067-0753 | justin.tallon at softwareradiosystems.com
>
>
> On Tue, Jul 16, 2019 at 9:52 AM Nehemiah Chan <nehemiahchan1999 at gmail.com>
> wrote:
>
>> Hi all,
>> There is a certain change in my project scope. I am currently stuck with
>> allowing the phone to surf into the internet while sniffing the packets
>> between the epc and enb using mac-lte-framed/s1ap protocol. I am currently
>> using Samsung s8+ as the UE, while running the commands srsepc and srsenb
>> respectively, I have also masqueraded the interface each time I run the
>> setup. I noticed that the s8+ has the Software Radio Systems LTE as the
>> network operator but I cannot configure why the phone is unable to surf the
>> web.
>>
>> For the current setup: Ubuntu 16.04 laptop with the B210, Samsung s8+
>> For the user database example file, I have used the default
>> configurations for the USIM card such as IMSI,Key and OPC.
>> I have followed the past posts which had the similar problem as mine. I
>> have tried to enable ipv4 network = forward.
>>
>> Here are the attached log files for the epc/enb. Do please let me know if
>> there is any way I can help. Just to double check besides the current
>> issue, with srsLTE, the UE isn't able to call or SMS right? I also utilise
>> Wireshark to sniff for packets such as using mac-lte-framed/s1ap, I have
>> tried using pdcp protocol, but wasn't able to achieve anything.
>>
>>
>> Best Regards,
>> Nehemiah
>> _______________________________________________
>> srslte-users mailing list
>> srslte-users at lists.softwareradiosystems.com
>> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20190716/f3b695e4/attachment.htm>