[srslte-users] srsUE not able to connect to the internet

[Justin Tallon]

Hey Nehemiah,

You need to populate the csv file with a new entry for the SIM card you are
using.

The IMSI and OP etc should have come with the card when you purchased it.

Can you see these numbers anywhere, perhaps in an email?

Regards,
Justin
____
Justin Tallon Ph.D.

Software Radio Systems (SRS)
http://www.softwareradiosystems.com

+353-86-067-0753 | justin.tallon at softwareradiosystems.com


On Tue, Jul 16, 2019 at 11:26 AM Nehemiah Chan <nehemiahchan1999 at gmail.com>
wrote:

> Hi Justin,
>
> Yes I am using the default configurations from the user_db.csv file. Can
> you please guide me on how do I add the SIM if I am using the file. I still
> have issues connecting to https websites. At the moment, the phone will
> just remove the https portion for example like yahoo. I am currently using
> the samsung s8+.
>
> Best regards,
> Nehemiah
>
> On Tue, Jul 16, 2019 at 5:06 PM Justin Tallon <
> justin.tallon at softwareradiosystems.com> wrote:
>
>> Hey Nehemiah,
>>
>> It should be possible to get http websites over the link and sms and
>> calls are not currently supported.
>>
>> I notice the user_db.csv file you sent is the default. Is this the one
>> you are using?
>>
>> If so you need to add the SIM you are using to this file.
>>
>> Regards.
>> Justin
>> ____
>> Justin Tallon Ph.D.
>>
>> Software Radio Systems (SRS)
>> http://www.softwareradiosystems.com
>>
>> +353-86-067-0753 | justin.tallon at softwareradiosystems.com
>>
>>
>> On Tue, Jul 16, 2019 at 10:58 AM Nehemiah Chan <
>> nehemiahchan1999 at gmail.com> wrote:
>>
>>> Hi Justin,
>>>
>>> I have just managed to surf the internet using the iptables forwarding
>>> between two interface( by seeking help). I am able to surf into non http
>>> websites such as yahoo.com. Here are the files you have requested for.
>>> Is it possible to surf into http websites? Thanks in advance. Besides that,
>>> it is still not possible to do call or sms functions?
>>>
>>> Best Regards,
>>> Nehemiah
>>>
>>> On Tue, Jul 16, 2019 at 4:48 PM Justin Tallon <
>>> justin.tallon at softwareradiosystems.com> wrote:
>>>
>>>> Hey Nehemiah,
>>>>
>>>> Can you send on the epc.conf, enb.conf and the user_db.csv.
>>>>
>>>> Thanks,
>>>> Justin
>>>> ____
>>>> Justin Tallon Ph.D.
>>>>
>>>> Software Radio Systems (SRS)
>>>> http://www.softwareradiosystems.com
>>>>
>>>> +353-86-067-0753 | justin.tallon at softwareradiosystems.com
>>>>
>>>>
>>>> On Tue, Jul 16, 2019 at 10:25 AM Nehemiah Chan <
>>>> nehemiahchan1999 at gmail.com> wrote:
>>>>
>>>>> Hi Justin,
>>>>>
>>>>> The SIM cards being used at the moment is from sysmocom sjs1-4ff. The
>>>>> configurations from the user_db.csv are similar to the configurations in
>>>>> the USIM card configurations. I was wondering if there are specific methods
>>>>> to troubleshoot.
>>>>>
>>>>> Best Regards,
>>>>> Nehemiah
>>>>>
>>>>> On Tue, Jul 16, 2019 at 4:08 PM Justin Tallon <
>>>>> justin.tallon at softwareradiosystems.com> wrote:
>>>>>
>>>>>> Hey Nehemiah,
>>>>>>
>>>>>> What SIM card are you using? In order to attach properly to the
>>>>>> network, you need to have a test SIM of some sort and supply the IMSI of
>>>>>> this SIM to the EPC using the user_db.csv.
>>>>>>
>>>>>> Regards,
>>>>>> Justin
>>>>>> ____
>>>>>> Justin Tallon Ph.D.
>>>>>>
>>>>>> Software Radio Systems (SRS)
>>>>>> http://www.softwareradiosystems.com
>>>>>>
>>>>>> +353-86-067-0753 | justin.tallon at softwareradiosystems.com
>>>>>>
>>>>>>
>>>>>> On Tue, Jul 16, 2019 at 9:52 AM Nehemiah Chan <
>>>>>> nehemiahchan1999 at gmail.com> wrote:
>>>>>>
>>>>>>> Hi all,
>>>>>>> There is a certain change in my project scope. I am currently stuck
>>>>>>> with allowing the phone to surf into the internet while sniffing the
>>>>>>> packets between the epc and enb using mac-lte-framed/s1ap protocol. I am
>>>>>>> currently using Samsung s8+ as the UE, while running the commands srsepc
>>>>>>> and srsenb respectively, I have also masqueraded the interface each time I
>>>>>>> run the setup. I noticed that the s8+ has the Software Radio Systems LTE as
>>>>>>> the network operator but I cannot configure why the phone is unable to surf
>>>>>>> the web.
>>>>>>>
>>>>>>> For the current setup: Ubuntu 16.04 laptop with the B210, Samsung s8+
>>>>>>> For the user database example file, I have used the default
>>>>>>> configurations for the USIM card such as IMSI,Key and OPC.
>>>>>>> I have followed the past posts which had the similar problem as
>>>>>>> mine. I have tried to enable ipv4 network = forward.
>>>>>>>
>>>>>>> Here are the attached log files for the epc/enb. Do please let me
>>>>>>> know if there is any way I can help. Just to double check besides the
>>>>>>> current issue, with srsLTE, the UE isn't able to call or SMS right? I also
>>>>>>> utilise Wireshark to sniff for packets such as using mac-lte-framed/s1ap, I
>>>>>>> have tried using pdcp protocol, but wasn't able to achieve anything.
>>>>>>>
>>>>>>>
>>>>>>> Best Regards,
>>>>>>> Nehemiah
>>>>>>> _______________________________________________
>>>>>>> srslte-users mailing list
>>>>>>> srslte-users at lists.softwareradiosystems.com
>>>>>>> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
>>>>>>>
>>>>>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20190719/0ba43b89/attachment.htm>