[srslte-users] LimeSDR USB crash when enb

[Andre Puschmann]

Hey,
please use 19.03 for the Lime. The Soapy driver has been improved recently.

Cheers
Andre


On 5/6/19 15:09, Federico Quattrin wrote:
> Hi all,
> I'm trying to build a enb with a limeSDR, I installed SoapySDR,
> LimeSuite and LimeUtil. I'm working with the srsLTE version 18.02. when
> I built it I did without UHD, bladeRF and without GUI. And I did run the
> command "sudo srslte_install_configs.sh service".
> I set the log file to be in debug mode but is it empty. Please attached
> find you the enb.conf file. I don't know what the problem could be,
> maybe some library from Soapy is missing? In the console I receive this
> message:
> 
> 
> Built in Release mode using 18.12.0.
> 
> ---  Software Radio Systems LTE eNodeB  ---
> 
> Reading configuration file /etc/srslte/enb.conf...
> [INFO] [UHD] linux; GNU C++ version 8.3.0; Boost_106700;
> UHD_3.14.0.0-0-unknown
> Soapy has found device #0: addr=1d50:6108, driver=lime,
> label=LimeSDR-USB [USB 3.0] 90706024F2337, media=USB 3.0, module=FX3,
> name=LimeSDR-USB, serial=00090706024F2337,
> [INFO] Make connection: 'LimeSDR-USB [USB 3.0] 90706024F2337'
> [INFO] Reference clock 30.72 MHz
> [INFO] Device name: LimeSDR-USB
> [INFO] Reference: 30.72 MHz
> [INFO] LMS7002M calibration values caching Disable
> [INFO] RX LPF configured
> Set Rx bandwidth to 2.50 MHz
> [INFO] Filter calibrated. Filter order-4th, filter bandwidth set to 5
> MHz.Real pole 1st order filter set to 2.5 MHz. Preemphasis filter not active
> [INFO] TX LPF configured
> Set Tx bandwidth to 5.00 MHz
> Setting up RX stream
> srsLTE crashed... backtrace saved in './srsLTE.backtrace.crash'...
> ---  exiting  ---
> libusb: warning [libusb_exit] application left some devices open
> 
> 
> Thanks in advance!
> Greetings,
> Federico
> 
> _______________________________________________
> srslte-users mailing list
> srslte-users at lists.softwareradiosystems.com
> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
>