[srslte-users] SRS UE connecting to commercial network

[Andre Puschmann]

You don't need to configure anything at the UE side. It detects
everything automatically.

Try pdsch_ue if you have issues with the UE and make sure you can
receive a clean signal.

Cheers
Andre

On 11/6/19 16:04, Saimanoj Katta wrote:
> Hi,
> 
> I have attached the logs. I analyzed and realized this: The PLMN which I
> have given is not detected by the code. Furthermore, the SIB1 is not
> detected. There needs to be decoding of MIB to connect, right? Do I need
> to change something from expert config options?
> 
> Further, In the README file, it says, it has been tested for bandwidths:
> 1.4, 3, 5, 10, 15 and 20 MHz. I assume this is the channel bandwidth and
> I need it for 20MHz. From one of the papers, I remember the srsLTE code
> is set to 20MHz. How do I change it? I was not able to decode.
> 
> Regards,
> manu


-- 
Andre Puschmann

Software Radio Systems (SRS)
http://www.softwareradiosystems.com

PGP/GnuPG key: 6C42AB31
fingerprint: 137A AE49 785B A445 257C 8AD7 D877 A498 6C42 AB31