[srslte-users] Possibility to use srseEPC+ OAI eNb + commercial UE?

[Pedro Alvarez]

Hi Johannes,

There should be no issue from the EPC side in doing this.
However, this is not a configuration that I have tested, so you might
come across some weird corner-cases.

You can send an e-mail here if you have specific issues, but I can't
guarantee that I will be able to help.

Cheers,
Pedro

On Mon, Jun 17, 2019 at 9:10 AM Johannes Berners
<johannes.berners at rwth-aachen.de> wrote:
>
> Hello,
>
> I'm currently working on my masters thesis and trying to set up a measurement site for LTE smartphones. In detail I want to get the values for RSRP and RSSI which are measured by the (commecial) UE and sent back to the eNb. In the last two months working with srsLTE I learned that it is not possible at the moment to branch off these values from the UE or the eNb so by investigating the topic I learned that this would be possible with the knewest developer branch from OAI RAN. As the installtion or handling of OAI is not as staight forward as it is with srsLTE and this don't have to be more difficult as they have to be I wanted to ask if it would be possible to work with the combination of OAI eNb + srsEPC + commercial UE. According to the introduction in OAI this should be possible but at that point I wanted to ask if somebody got it already running in this combination? I would be happy to hear any of your experiences or suggestions related to my problem. Thank you in advance!
>
>
> Greetings
>
>
> Johannes
>
> _______________________________________________
> srslte-users mailing list
> srslte-users at lists.softwareradiosystems.com
> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users