[srslte-users] Having troubles to connect srsUE with srsENB
Saimanoj Katta
saimanoj.katta at cumucore.com
Fri Jun 28 14:22:44 UTC 2019
Hi,
I didn't have the UE as my colleague was using it. Today, I got a chance to
access it. Here are the logs of EPC and ENB of srsLTE while connecting to a
commercial UE.
EPC detects the incoming IMSI number, but, it fails to connect. Is there a
specific procedure to add the UE details in the user_db.csv or I enter them
manually? Currently, I just entered them manually in a editor, since it is
a csv file.
Regards,
Saimanoj
On Fri, Jun 14, 2019 at 7:01 PM Mohammed Jabi <mohammed.jabi.mj at gmail.com>
wrote:
> Hi All,
>
> Thanks for your feedback. I do not have yet a spectrum analyser. Please
> find below the outputs:
>
>
> ---------------------------------------------------------------------------------------------
>
> ---------------------------------------------------------------------------------------------
>
> ~/srsLTE/build$ ./lib/examples/pdsch_enodeb -f 2685000000 -p 6 -g 80
> Opening RF device...
> Opening bladeRF...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> Setting sampling rate 1.92 MHz
> [WARNING @ host/libraries/libbladeRF/src/board/bladerf1/bladerf1.c:1615]
> set_tx_gain: unable to achieve requested gain 80 (missed by 7)
> Set TX gain: 73.0 dB
> set TX frequency to 2684999936
> Set TX freq: 2685.00 MHz
> - Resource Allocation Type: Type 0
> + Resource Block Group Size: 1
> + RBG Bitmap: 0x3f
> - HARQ process: 0
> - TPC command for PUCCH: --
> - Transport blocks swapped: false
> - Transport block 0 enabled: true
> + Modulation and coding scheme index: 1
> + New data indicator: No
> + Redundancy version: 0
> - Transport block 1 enabled: false
> Type new MCS index (0-28) and press Enter: 0
> - Resource Allocation Type: Type 0
> + Resource Block Group Size: 1
> + RBG Bitmap: 0x3f
> - HARQ process: 0
> - TPC command for PUCCH: --
> - Transport blocks swapped: false
> - Transport block 0 enabled: true
> + Modulation and coding scheme index: 0
> + New data indicator: No
> + Redundancy version: 0
> - Transport block 1 enabled: false
> Type new MCS index (0-28) and press Enter: 1
> - Resource Allocation Type: Type 0
> + Resource Block Group Size: 1
> + RBG Bitmap: 0x3f
> - HARQ process: 0
> - TPC command for PUCCH: --
> - Transport blocks swapped: false
> - Transport block 0 enabled: true
> + Modulation and coding scheme index: 1
> + New data indicator: No
> + Redundancy version: 0
> - Transport block 1 enabled: false
> Type new MCS index (0-28) and press Enter: 10
> - Resource Allocation Type: Type 0
> + Resource Block Group Size: 1
> + RBG Bitmap: 0x3f
> - HARQ process: 0
> - TPC command for PUCCH: --
> - Transport blocks swapped: false
> - Transport block 0 enabled: true
> + Modulation and coding scheme index: 10
> + New data indicator: No
> + Redundancy version: 0
> - Transport block 1 enabled: false
> Type new MCS index (0-28) and press Enter: 15
> - Resource Allocation Type: Type 0
> + Resource Block Group Size: 1
> + RBG Bitmap: 0x3f
> - HARQ process: 0
> - TPC command for PUCCH: --
> - Transport blocks swapped: false
> - Transport block 0 enabled: true
> + Modulation and coding scheme index: 15
> + New data indicator: No
> + Redundancy version: 0
> - Transport block 1 enabled: false
> Type new MCS index (0-28) and press Enter: ^CSIGINT received. Exiting...
> Done
>
>
> ---------------------------------------------------------------------------------------------------
>
> ---------------------------------------------------------------------------------------------------
>
> ~/srsLTE/build$ ./lib/examples/pdsch_ue -f 2685000000
> Opening RF device with 1 RX antennas...
> Opening bladeRF...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> Starting AGC thread...
> Tunning receiver to 2685.000 MHz
> set RX frequency to 2685000000
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 0 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 1 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 2 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 3 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 4 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 5 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 6 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 7 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 8 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 9 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 10 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 11 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 12 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 13 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 14 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 15 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 16 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 17 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 18 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 19 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 20 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 21 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 22 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 23 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 24 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 25 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 26 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 27 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 28 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 29 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 30 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 31 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 32 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 33 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 34 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 35 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 36 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 37 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 38 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 39 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 40 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 41 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 42 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 43 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 44 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 45 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 46 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 47 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 48 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 49 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 50 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 51 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 52 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 53 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 54 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 55 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 56 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 57 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 58 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 59 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 60 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 61 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 62 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 63 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 64 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 65 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 66 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 67 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 68 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 69 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 70 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 71 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 72 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 73 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 74 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 75 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 76 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 77 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 78 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 79 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 80 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 81 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 82 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 83 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 84 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 85 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 86 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 87 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 88 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 89 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 90 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 91 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 92 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 93 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 94 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 95 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 96 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 97 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 98 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 99 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 100 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 101 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 102 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 103 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 104 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 105 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 106 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
> Cell not found after 107 trials. Trying again (Press Ctrl+C to exit)
> Searching for cell...
> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
> ^CSIGINT received. Exiting...
> /home/moe/srsLTE/lib/src/phy/rf/rf_utils.c.193: Could not find any cell in
> this frequency
>
>
> -------------------------------------------------------------------------------------------
>
> -------------------------------------------------------------------------------------------
>
> Regards,
> Mohammed
>
> On Fri, Jun 14, 2019 at 7:53 AM Justin Tallon <
> justin.tallon at softwareradiosystems.com> wrote:
>
>> Hey Mohammed,
>>
>> Since you cannot even see the enodeb transmission with pdsch_ue, I
>> suggest trying to transmit with the basic pdsch_enodeb example and attempt
>> to receive this first.
>>
>> Do you have access to a spectrum analyzer of any kind to check the
>> at node 1: ./pdsch_enodeb -f <freq> -p 6 -g 80
>>
>> at node 2: ./pdsch_ue -f <freq>
>>
>> share the results here.
>>
>> Thanks,
>> Justin
>> ____
>> Justin Tallon Ph.D.
>>
>> Software Radio Systems (SRS)
>> http://www.softwareradiosystems.com
>>
>> +353-86-067-0753 | justin.tallon at softwareradiosystems.com
>>
>>
>> On Thu, Jun 13, 2019 at 12:25 PM Mohammed Jabi <
>> mohammed.jabi.mj at gmail.com> wrote:
>>
>>> Hi,
>>>
>>> No, I did not find any solution yet. I have also tried to connect enb;
>>> running over BladeRf; and real UEs. Unfortunatly, UEs are not even capable
>>> of detecting the created srslte network. I have tried 3 different phones:
>>> Samsung Galaxy 7 and 8 and Huawei (I do not remember the model but it is a
>>> new one).
>>>
>>> One additional remark is that when I have srsUE running on BladeRf too,
>>> not only it can not detect enb but the network interface "tun_srsue" is not
>>> created.
>>>
>>> After going throughout many srslte related discussions/forums, I have
>>> the impression that usrp was most tested/used as enb than BladeRf. So, I
>>> suspect that my problem is related to hardware.
>>>
>>> Please let me posted if you come up with a solution.
>>>
>>> Thanks
>>> Mohammed
>>>
>>>
>>>
>>> On Thu, Jun 13, 2019, 3:52 AM Saimanoj Katta, <
>>> saimanoj.katta at cumucore.com> wrote:
>>>
>>>> Hi Justin and Mohammed,
>>>>
>>>> Mohammed: Did you figure any solution for this? I am encountering the
>>>> same problem.
>>>> Justin: In my case, the cell tries to decode the SIB1 and MIB from
>>>> the eNB (I got this information from logs). I checked the UI console of eNB
>>>> and it doesn't have SIB1 configured. I am not able to add it either there.
>>>> Any suggestions on how to proceed? Radio level works correctly for me!
>>>>
>>>> On further note, I tried to eNB and EPC on USRP and connect it via UE(
>>>> real mobile). I configured the IMSI, K, OPC in EPC db. The mobile could not
>>>> figure the created network either. Is something wrong with my setup of the
>>>> hardware?
>>>>
>>>> I would appreciate any leads. Thank you very much for your time and
>>>> consideration
>>>>
>>>> Here's my output in the radio level:
>>>> ubuntu at ubuntu-Zephyrus-GX501GI:~/srsLTE/build$ ./lib/examples/pdsch_ue
>>>> -f 2680e6
>>>> Opening RF device with 1 RX antennas...
>>>> [INFO] [UHD] linux; GNU C++ version 7.4.0; Boost_106501;
>>>> UHD_3.15.0.git-1-gf83faf28
>>>> [INFO] [LOGGING] Fastpath logging disabled at runtime.
>>>> Opening USRP with args: type=x300,master_clock_rate=184.32e6
>>>> [INFO] [X300] X300 initialization sequence...
>>>> [INFO] [X300] Maximum frame size: 1472 bytes.
>>>> [INFO] [X300] Radio 1x clock: 184.32 MHz
>>>> [INFO] [GPS] Found an internal GPSDO: LC_XO, Firmware Rev 0.929a
>>>> [INFO] [0/DmaFIFO_0] Initializing block control (NOC ID:
>>>> 0xF1F0D00000000000)
>>>> [INFO] [0/DmaFIFO_0] BIST passed (Throughput: 1305 MB/s)
>>>> [INFO] [0/DmaFIFO_0] BIST passed (Throughput: 1305 MB/s)
>>>> [INFO] [0/Radio_0] Initializing block control (NOC ID:
>>>> 0x12AD100000000001)
>>>> [INFO] [0/Radio_1] Initializing block control (NOC ID:
>>>> 0x12AD100000000001)
>>>> [INFO] [0/DDC_0] Initializing block control (NOC ID: 0xDDC0000000000000)
>>>> [INFO] [0/DDC_1] Initializing block control (NOC ID: 0xDDC0000000000000)
>>>> [INFO] [0/DUC_0] Initializing block control (NOC ID: 0xD0C0000000000000)
>>>> [INFO] [0/DUC_1] Initializing block control (NOC ID: 0xD0C0000000000000)
>>>> Starting AGC thread...
>>>> Tunning receiver to 2680.000 MHz
>>>> Searching for cell...
>>>> *Found Cell_id: 12 FDD, CP: Normal , DetectRatio=100% PSR=7.37,
>>>> Power=-84.1 dBm
>>>> Found Cell_id: 0 FDD, CP: Normal , DetectRatio= 0% PSR=0.00,
>>>> Power=-inf dBm
>>>> Found Cell_id: 0 FDD, CP: Normal , DetectRatio= 0% PSR=0.00,
>>>> Power=-inf dBm
>>>> Decoding PBCH for cell 12 (N_id_2=0)
>>>> Setting sampling rate 23.04 MHz
>>>> Gtk-Message: 10:43:57.467: Failed to load module "canberra-gtk-module"
>>>> - Type: FDD 7,3, FrameCnt: 0, State: 1
>>>> - PCI: 12
>>>> - Nof ports: 2
>>>> - CP: Normal
>>>> - PRB: 100
>>>> - PHICH Length: Normal
>>>> - PHICH Resources: 1/6
>>>> - SFN: 892
>>>> Decoded MIB. SFN: 892, offset: 0
>>>> CFO: +626,52 Hz
>>>> RSRP: +14,1 dBm | +3,2 dBm
>>>> SNR: +10,6 dB
>>>> TM: 2
>>>> Rb: 0,01 / 0,17 / 0,39 Mbps (net/maximum/processing)
>>>> PDCCH-Miss: 0,00%
>>>> PDSCH-BLER: 0,00%
>>>> TB 0: mcs=6; tbs=176
>>>> TB 1: mcs=0; tbs=0
>>>> Press enter maximum printing debug log of 1 subframe.
>>>>
>>>> CFO: +585,82 Hz
>>>> [DEBUG]: ---- Receive 23040 samples ----
>>>> [INFO]: SYNC TRACK: sf_idx=4, ret=1, next_state=1
>>>> CFO: +565,50 Hz
>>>> [DEBUG]: ---- Receive 23040 samples ----
>>>> [INFO]: SYNC TRACK: sf_idx=7, ret=1, next_state=1
>>>> CFO: +565,50 Hz
>>>> RSRP: +13,1 dBm | +3,2 dBm
>>>> SNR: +10,6 dB
>>>> TM: 2
>>>> Rb: 0,08 / 0,18 / 0,78 Mbps (net/maximum/processing)
>>>> PDCCH-Miss: 0,00%
>>>> PDSCH-BLER: 0,00%
>>>> TB 0: mcs=6; tbs=176
>>>> TB 1: mcs=0; tbs=0
>>>> Press enter maximum printing debug log of 1 subframe.
>>>>
>>>> CFO: +565,50 Hz
>>>> RSRP: +13,1 dBm | +3,2 dBm
>>>> SNR: +10,7 dB
>>>> TM: 2
>>>> Rb: 0,08 / 0,18 / 0,78 Mbps (net/maximum/processing)
>>>> PDCCH-Miss: 0,00%
>>>> PDSCH-BLER: 0,00%
>>>> TB 0: mcs=6; tbs=176
>>>> TB 1: mcs=0; tbs=0
>>>> Press enter maximum printing debug log of 1 subframe.
>>>>
>>>> ^Z
>>>> [5]+ Stopped ./lib/examples/pdsch_ue -f 2680e6
>>>>
>>>> Regards,
>>>> Manu
>>>>
>>>> On Thu, Jun 6, 2019 at 11:15 AM Justin Tallon <
>>>> justin.tallon at softwareradiosystems.com> wrote:
>>>>
>>>>> Hey Mohammed,
>>>>>
>>>>> As a first step, why don't you try to receive your enb signal with a
>>>>> pdsch_ue to ensure everything is working properly at a radio level.
>>>>>
>>>>> To do this cd to your build folder at your ue machine and run the
>>>>> following "./lib/examples/pdsch_ue -f <freq>"
>>>>>
>>>>> where <freq> is the downlink frequency of the enb you currently have
>>>>> running.
>>>>>
>>>>> Let me know what the output looks like.
>>>>>
>>>>> Regards,
>>>>>
>>>>> Justin
>>>>> ____
>>>>> Justin Tallon Ph.D.
>>>>>
>>>>> Software Radio Systems (SRS)
>>>>> http://www.softwareradiosystems.com
>>>>>
>>>>> +353-86-067-0753 | justin.tallon at softwareradiosystems.com
>>>>>
>>>>>
>>>>> On Thu, Jun 6, 2019 at 10:02 AM Mohammed Jabi <
>>>>> mohammed.jabi.mj at gmail.com> wrote:
>>>>>
>>>>>> Hi everyone,
>>>>>>
>>>>>> I am totally new to srsLTE and any help would be appreciated. I am
>>>>>> trying to connect srsue with srsenb. I have followed all steps described in
>>>>>> the github page but ue is not able to detect enb.
>>>>>>
>>>>>> I am using 2 BladeRFx40; one for ue and the other for enb. I am also
>>>>>> adopting the configuration provided without any changes. Both machines run
>>>>>> ubuntu 18.04.2 LTS and their CPUs are:
>>>>>> UE machine: Dual core Intel Core i7-4500U (-MT-MCP-) cache: 4096 KB
>>>>>> clock speeds: max: 3000 MHz 1: 1151 MHz 2: 1101 MHz 3:
>>>>>> 1078 MHz
>>>>>> 4: 1093 MHz
>>>>>> enB machine: Quad core Intel Core i7-3770 (-MT-MCP-) cache: 8192 KB
>>>>>> clock speeds: max: 3900 MHz 1: 1774 MHz 2: 1922 MHz 3:
>>>>>> 1797 MHz
>>>>>> 4: 1769 MHz 5: 1818 MHz 6: 2006 MHz 7: 1929 MHz 8: 1889 MHz
>>>>>>
>>>>>> You find attached log files when I run: "sudo srsue
>>>>>> --log.all_level=info". When I run"
>>>>>> sudo srsenb --log.all_level=info", the enb.log is always empty. Below
>>>>>> the outputs in terminals:
>>>>>>
>>>>>> XXXXXXXXXXXXXXX
>>>>>> sudo srsepc
>>>>>>
>>>>>> Built in Release mode using commit 5343b33f on branch master.
>>>>>>
>>>>>>
>>>>>> --- Software Radio Systems EPC ---
>>>>>>
>>>>>> Reading configuration file /home/remi/.config/srslte/epc.conf...
>>>>>> HSS Initialized.
>>>>>> MME S11 Initialized
>>>>>> MME GTP-C Initialized
>>>>>> MME Initialized. MCC: 0xf001, MNC: 0xff01
>>>>>> SPGW GTP-U Initialized.
>>>>>> SPGW S11 Initialized.
>>>>>> SP-GW Initialized.
>>>>>> Received S1 Setup Request.
>>>>>> S1 Setup Request - eNB Name: srsenb01, eNB id: 0x19b
>>>>>> S1 Setup Request - MCC:001, MNC:01, PLMN: 61712
>>>>>> S1 Setup Request - TAC 7, B-PLMN 0
>>>>>> S1 Setup Request - Paging DRX 2
>>>>>> Sending S1 Setup Response
>>>>>> SCTP Association Shutdown. Association: 12
>>>>>> Deleting eNB context. eNB Id: 0x19b
>>>>>> Releasing UEs context
>>>>>> No UEs to be released
>>>>>> ^CDeleting UE context in HSS. IMSI: 001010123456780
>>>>>> Deleting UE context in HSS. IMSI: 001010123456789
>>>>>>
>>>>>> XXXXXXXXXXXXXXX
>>>>>> sudo srsenb --log.all_level=info
>>>>>>
>>>>>> Built in Release mode using commit 5343b33f on branch master.
>>>>>>
>>>>>> --- Software Radio Systems LTE eNodeB ---
>>>>>>
>>>>>> Reading configuration file /home/remi/.config/srslte/enb.conf...
>>>>>> Opening bladeRF...
>>>>>> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
>>>>>> Setting frequency: DL=2685.0 Mhz, UL=2565.0 MHz
>>>>>> set TX frequency to 2684999936
>>>>>> set RX frequency to 2564999936
>>>>>> Setting Sampling frequency 11.52 MHz
>>>>>> Set RX sampling rate 11.52 Mhz, filter BW: 10.00 Mhz
>>>>>>
>>>>>> ==== eNodeB started ===
>>>>>> Type <t> to view trace
>>>>>> ^CStopping srsENB... Press Ctrl+C 9 more times to force stop
>>>>>> Warning could not stop properly PHY
>>>>>> --- exiting ---
>>>>>>
>>>>>> XXXXXXXXXXXXXXX
>>>>>> sudo srsue --log.all_level=info
>>>>>> Reading configuration file /home/moe/.config/srslte/ue.conf...
>>>>>>
>>>>>> Built in Release mode using commit 5343b33f on branch master.
>>>>>>
>>>>>> --- Software Radio Systems LTE UE ---
>>>>>>
>>>>>> Opening 1 RF devices with 1 RF channels...
>>>>>> Opening bladeRF...
>>>>>> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
>>>>>> Waiting PHY to initialize...
>>>>>> ...
>>>>>> Attaching UE...
>>>>>> Searching cell in DL EARFCN=3400, f_dl=2685.0 MHz, f_ul=2565.0 MHz
>>>>>> set RX frequency to 2685000000
>>>>>> set TX frequency to 2565000000
>>>>>> Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
>>>>>> ............................................^CStopping srsUE... Press
>>>>>> Ctrl+C 9 more times to force stop
>>>>>> .--- exiting ---
>>>>>>
>>>>>> please let me if you do need any necessary additional files. Thank
>>>>>> you
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> srslte-users mailing list
>>>>>> srslte-users at lists.softwareradiosystems.com
>>>>>> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
>>>>>>
>>>>> _______________________________________________
>>>>> srslte-users mailing list
>>>>> srslte-users at lists.softwareradiosystems.com
>>>>> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
>>>>>
>>>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20190628/e34958a7/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: epc.log
Type: text/x-log
Size: 4096 bytes
Desc: not available
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20190628/e34958a7/attachment.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: enb.log
Type: text/x-log
Size: 389120 bytes
Desc: not available
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20190628/e34958a7/attachment-0001.bin>
More information about the srsran-users
mailing list