[srslte-users] LimeSDR for PRB 6 for both UE & eNB, No SIB 3
Anson Tai
anson at mogame.com.tw
Tue Oct 1 21:22:16 UTC 2019
Hi Andre:
I have successful attach UE , nice.
Follow your suggestion, increase the SNR .
I have ping 172.16.0.1 , and get it connected. See [Result] bellow. Thanks you ,
Now I am adjusting the Gain Value, cause still have some "Detected Radio-Link Failure”
Cheers.
[Result]
eth0: flags=-28605<UP,BROADCAST,RUNNING,MULTICAST,DYNAMIC> mtu 1500
inet 192.168.1.14 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::d636:39ff:fe2b:f4a0 prefixlen 64 scopeid 0x20<link>
ether d4:36:39:2b:f4:a0 txqueuelen 1000 (Ethernet)
RX packets 19939 bytes 1519439 (1.5 MB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 19869 bytes 3881554 (3.8 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 86
eth1: flags=-28669<UP,BROADCAST,MULTICAST,DYNAMIC> mtu 1500
ether d4:36:39:2b:f4:a1 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 90 bytes 7472 (7.4 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 90 bytes 7472 (7.4 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
tun_srsue: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500
inet 172.16.0.2 netmask 255.255.255.0 destination 172.16.0.2
unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 500 (UNSPEC)
RX packets 18 bytes 3076 (3.0 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 37 bytes 13577 (13.5 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
ubuntu at arm:~/.config/srslte$ ping 172.16.0.1
PING 172.16.0.1 (172.16.0.1) 56(84) bytes of data.
64 bytes from 172.16.0.1: icmp_seq=1 ttl=64 time=58.5 ms
64 bytes from 172.16.0.1: icmp_seq=2 ttl=64 time=28.7 ms
64 bytes from 172.16.0.1: icmp_seq=3 ttl=64 time=46.8 ms
64 bytes from 172.16.0.1: icmp_seq=4 ttl=64 time=61.0 ms
64 bytes from 172.16.0.1: icmp_seq=5 ttl=64 time=51.7 ms
64 bytes from 172.16.0.1: icmp_seq=6 ttl=64 time=49.6 ms
64 bytes from 172.16.0.1: icmp_seq=7 ttl=64 time=40.6 ms
64 bytes from 172.16.0.1: icmp_seq=8 ttl=64 time=38.5 ms
64 bytes from 172.16.0.1: icmp_seq=13 ttl=64 time=71.7 ms
64 bytes from 172.16.0.1: icmp_seq=14 ttl=64 time=63.9 ms
Anson
anson at mogame.com.tw
mobile: 0986154449
—————————————————————————————
www.mogame.com.tw
MoGaMe Mobile Entertainment Co.,Ltd
Apple MFi 硬體授權開發商
中華兩岸文化經貿交流協會-常務委員 http://www.ccsctda.com
玉山衛星計畫主持人-YuSat-1
> Andre Puschmann <andre.puschmann at softwareradiosystems.com> 於 2019年10月1日 16:19 寫道：
>
> You seem to have bad RF conditions, very low SNR. PRACH goes through but
> neither PDSCH nor PUSCH are fine. Try adjusting the gain values and
> better to use pdsch_ue/enodeb for that.
>
> On 30/9/19 22:54, Anson Tai wrote:
>> Dear Andre:
>> Logs as bellow, and for LimeSDR can’t support 1.4 MHz (should be
>> above 3MHz), I have changed the PRB to 15.
>> Here is the Logs.
>> (1) ue side
>>
>> 20:26:47.991641 [NAS ] [I] Attach Request
>> 20:26:47.991748 [RRC ] [I] PLMN Selected 00101
>> 20:26:47.991804 [NAS ] [I] Generating attach request
>> 20:26:47.991845 [NAS ] [I] Generating PDN Connectivity Request
>> 20:26:47.991881 [NAS ] [D] Requesting IPv4 PDN protocol
>> 20:26:47.991929 [NAS ] [I] Requesting IMSI attach (IMSI=001010123456789)
>> 20:26:47.991969 [RRC ] [I] Initiation of Connection establishment procedure
>> 20:26:47.992030 [RRC ] [I] Set PDSCH-Config p_a=dB0
>> 20:26:47.992109 [RRC ] [I] Set MAC default configuration
>> 20:26:47.992154 [RRC ] [I] Set MAC main config: harq-MaxReTX=5,
>> bsr-TimerReTX=2560, bsr-TimerPeriodic=-1
>> 20:26:47.992188 [RRC ] [I] Configuring serving cell...
>> 20:26:47.992216 [RRC ] [I] Cell has SIB1
>> 20:26:47.992247 [RRC ] [I] Cell has SIB2
>> 20:26:47.992276 [RRC ] [I] SIB2 received
>> 20:26:47.992310 [RRC ] [I] Set RACH ConfigCommon: NofPreambles=52,
>> ResponseWindow=10, ContentionResolutionTimer=64 ms
>> 20:26:47.992342 [RRC ] [I] Set PUSCH ConfigCommon: HopOffset=2,
>> RSGroup=0, RSNcs=0, N_sb=1
>> 20:26:47.992373 [RRC ] [I] Set PUCCH ConfigCommon: DeltaShift=2,
>> CyclicShift=0, N1=12, NRB=2
>> 20:26:47.992404 [RRC ] [I] Set PRACH ConfigCommon: SeqIdx=128, HS=no,
>> FreqOffset=2, ZC=5, ConfigIndex=3
>> 20:26:47.992437 [RRC ] [I] Set Constants and Timers: N310=1, N311=1,
>> t300=2000, t301=2000, t310=200, t311=1000
>> 20:26:47.992468 [RRC ] [I] Cell has no SIB3. Obtaining SIB3
>> 20:26:47.992496 [RRC ] [I] Could not find SIB3 scheduling in SIB1
>> 20:26:47.992522 [RRC ] [I] Timeout while acquiring SIB3
>> 20:26:47.992551 [RRC ] [I] Cell has no SIB13. Obtaining SIB13
>> 20:26:47.992577 [RRC ] [I] Could not find SIB13 scheduling in SIB1
>> 20:26:47.992603 [RRC ] [I] Timeout while acquiring SIB13
>> 20:26:47.992630 [RRC ] [D] Preparing RRC Connection Request
>> 20:26:47.992670 [RRC ] [D] Setting UE contention resolution ID:
>> 89151458313478
>> 20:26:47.992729 [RRC ] [D] SRB0 - Tx rrcConnectionRequest (6 B)
>> 0000: 51 15 31 01 05 06
>> 20:26:47.992779 [RRC ] [D] Content:
>> [
>> {
>> "UL-CCCH-Message": {
>> "message": {
>> "c1": {
>> "rrcConnectionRequest": {
>> "criticalExtensions": {
>> "rrcConnectionRequest-r8": {
>> "ue-Identity": {
>> "randomValue": "0001000101010011000100000001000001010000"
>> },
>> "establishmentCause": "mo-Signalling",
>> "spare": "0"
>> }
>> }
>> }
>> }
>> }
>> }
>> }
>> ]
>> Random Access Transmission: seq=35, ra-rnti=0x2
>> Random Access Transmission: seq=43, ra-rnti=0x2
>> Random Access Transmission: seq=19, ra-rnti=0x2
>> Random Access Transmission: seq=13, ra-rnti=0x2
>> Random Access Transmission: seq=35, ra-rnti=0x2
>> Random Access Transmission: seq=42, ra-rnti=0x2
>> Random Access Transmission: seq=15, ra-rnti=0x2
>> Random Access Transmission: seq=22, ra-rnti=0x2
>> Random Access Transmission: seq=39, ra-rnti=0x2
>> Random Access Transmission: seq=5, ra-rnti=0x2
>> 20:26:48.194632 [RRC ] [W] Detected Radio-Link Failure
>> Warning: Detected Radio-Link Failure
>> 20:26:49.992889 [RRC ] [I] Timer T300 expired: ConnectionRequest timed out
>> 20:26:49.992976 [RRC ] [I] Setting default PHY config dedicated
>> 20:26:49.993029 [RRC ] [I] Set PDSCH-Config p_a=dB0
>> 20:26:50.001608 [RRC ] [I] Set MAC default configuration
>> 20:26:50.001690 [RRC ] [I] Set MAC main config: harq-MaxReTX=5,
>> bsr-TimerReTX=2560, bsr-TimerPeriodic=-1
>> 20:26:50.001740 [RRC ] [W] Could not establish connection. Deallocating
>> dedicatedInfoNAS PDU
>> 20:26:50.001780 [NAS ] [E] Could not establish RRC connection
>> 20:26:50.002184 [NAS ] [E] Could not attach in attach request
>>
>>
>> 2. eNB
>>
>> 04:26:56.063574 [RRC ] [I] Disconnecting rnti=0x11f.
>> 04:26:56.063616 [RRC ] [I] Removed user rnti=0x11f
>> 04:26:56.068489 [PHY2] [I] [06936] PUSCH: rnti=0x120, rb=(2,4),
>> nof_re=432, tbs=7, mod=2, rv=1, crc=KO, avg_iter=10.0, t=26 us, snr=-0.1 dB
>> 04:26:56.068520 [PHY2] [I] [06936] PHICH: rnti=0x120, hi=0, I_lowest=2,
>> n_dmrs=0, tti_tx_dl=6940
>> 04:26:56.073795 [PHY0] [I] [06941] PRACH: 0/1, preamble=48, offset=6.9
>> us, peak2avg=148.9, max_offset=30.0 us
>> 04:26:56.073983 [RLC ] [I] Added radio bearer SRB0 in Transparent Mode
>> 04:26:56.073990 [RLC ] [I] Configured radio bearer SRB0 in Transparent Mode
>> 04:26:56.073994 [RRC ] [I] Added new user rnti=0x121
>> RACH: tti=6941, preamble=48, offset=6, temp_crnti=0x121
>> 04:26:56.074849 [PHY1] [I] [06942] PDCCH: f=1A, cce= 0, L=2, riv=45,
>> pid=0, mcs={0}, rv={0}, ndi={0}, tpc_pucch=0, tti_tx_dl=6946
>> 04:26:56.074873 [PHY1] [I] [06942] PDSCH: rnti=0x2, nof_prb=4,
>> nof_re=504, tbs={7}, mod={2}, rv={0}, t=4 us, tti_tx_dl=6946
>> 04:26:56.084442 [PHY1] [I] [06952] PUSCH: rnti=0x121, rb=(2,4),
>> nof_re=432, tbs=7, mod=2, rv=0, crc=KO, avg_iter=10.0, t=25 us, snr=-1.2 dB
>> 04:26:56.084475 [PHY1] [I] [06952] PDCCH: f=0, cce= 0, L=3, riv=32,
>> mcs=0, rv=2, ndi=1, tpc_pusch=1, dmrs_cs=0, tti_tx_dl=6956
>> 04:26:56.084483 [PHY1] [I] [06952] PHICH: rnti=0x121, hi=0, I_lowest=2,
>> n_dmrs=0, tti_tx_dl=6956
>> 04:26:56.092959 [PHY0] [I] [06960] PUSCH: rnti=0x121, rb=(2,4),
>> nof_re=432, tbs=7, mod=2, rv=2, crc=KO, avg_iter=10.0, t=26 us, snr=-0.4 dB
>> 04:26:56.092993 [PHY0] [I] [06960] PDCCH: f=0, cce= 0, L=3, riv=32,
>> mcs=0, rv=3, ndi=1, tpc_pusch=1, dmrs_cs=0, tti_tx_dl=6964
>> 04:26:56.093003 [PHY0] [I] [06960] PHICH: rnti=0x121, hi=0, I_lowest=2,
>> n_dmrs=0, tti_tx_dl=6964
>> 04:26:56.101458 [PHY0] [I] [06968] PUSCH: rnti=0x121, rb=(2,4),
>> nof_re=432, tbs=7, mod=2, rv=3, crc=KO, avg_iter=10.0, t=25 us, snr=-0.7 dB
>> 04:26:56.101492 [PHY0] [I] [06968] PDCCH: f=0, cce= 0, L=3, riv=32,
>> mcs=0, rv=1, ndi=1, tpc_pusch=1, dmrs_cs=0, tti_tx_dl=6972
>> 04:26:56.101502 [PHY0] [I] [06968] PHICH: rnti=0x121, hi=0, I_lowest=2,
>> n_dmrs=0, tti_tx_dl=6972
>> 04:26:56.108874 [PHY1] [I] [06976] PUSCH: rnti=0x121, rb=(2,4),
>> nof_re=432, tbs=7, mod=2, rv=1, crc=KO, avg_iter=10.0, t=26 us, snr=-0.1 dB
>> 04:26:56.108906 [PHY1] [I] [06976] PHICH: rnti=0x121, hi=0, I_lowest=2,
>> n_dmrs=0, tti_tx_dl=6980
>> 04:26:56.114030 [RRC ] [W] User rnti=0x120 expired RRCConnectionSetup
>> deadline: 0:80397>0:80000 us
>> 04:26:56.114040 [RRC ] [I] User rnti=0x120 timed out. Exists in s1ap=no
>>
>>
>> Thanks you
>>
>>
>> Anson
>> anson at mogame.com.tw <mailto:anson at mogame.com.tw> <mailto:anson at mogame.com.tw <mailto:anson at mogame.com.tw>>
>> mobile: 0986154449
>> —————————————————————————————
>> www.mogame.com.tw <http://www.mogame.com.tw/>
>> MoGaMe Mobile Entertainment Co.,Ltd
>> Apple MFi 硬體授權開發商
>> 中華兩岸文化經貿交流協會-常務委員 http://www.ccsctda.com <http://www.ccsctda.com/>
>> 玉山衛星計畫主持人-YuSat-1
>>
>>
>>> Andre Puschmann <andre.puschmann at softwareradiosystems.com <mailto:andre.puschmann at softwareradiosystems.com>
>>> <mailto:andre.puschmann at softwareradiosystems.com <mailto:andre.puschmann at softwareradiosystems.com>>> 於 2019年9月29日
>>> 04:12 寫道：
>>>
>>> Can you try to set a rx_gain? Perhaps the SNR is a bit too low. And send
>>> the full logs please.
>>>
>>> cheers
>>> andre
>>>
>>>
>>> On 26/9/19 7:06, Anson Tai wrote:
>>>> Dear All:
>>>>
>>>> We are doing related research for Rel-8, Cat-1 (PRB 6) with LimeSDR
>>>>
>>>> Both Environments are based on master version.
>>>>
>>>> here is the ue log & ue.conf
>>>>
>>>> [LOG]
>>>>
>>>> 04:56:56.836489 [RRC ] [I] Cell found in this frequency. Setting new
>>>> serving cell...
>>>>
>>>> 04:56:56.837554 [RRC ] [I] Adding PCI=1, earfcn=3650, cell_idx=-1
>>>>
>>>> 04:56:56.838008 [RRC ] [I] Added neighbour cell EARFCN=3650, PCI=1,
>>>> nof_neighbours=1
>>>>
>>>> 04:56:56.838261 [RRC ] [I] Neighbours: [pci=1, rsrp=nan]
>>>>
>>>> 04:56:56.838530 [RRC ] [I] Setting serving cell idx=0, earfcn=3650,
>>>> PCI=1, nof_neighbours=0
>>>>
>>>> 04:56:56.838770 [RRC ] [I] Cell has no SIB1. Obtaining SIB1
>>>>
>>>> 04:56:56.839016 [MAC ] [I] [00965] SCHED: Searching for DL dci for
>>>> SI-RNTI window_st=985, window_len=1
>>>>
>>>> 04:56:56.839275 [RRC ] [I] Instructed MAC to search for SIB1,
>>>> win_start=985, win_len=1, period=20, sched_index=0
>>>>
>>>> 04:56:56.842840 [RRC ] [I] MEAS: New measurement earfcn=-1, pci=1
>>>> (serving), rsrp=23.3 dBm.
>>>>
>>>> 04:56:56.844357 [MAC ] [I] [00985] DL 0 (TB 0): newTX tbs=18, rv=2,
>>>> ack=OK, ndi=0
>>>>
>>>> 04:56:56.847566 [RRC ] [I] MEAS: New measurement earfcn=-1, pci=1
>>>> (serving), rsrp=35.6 dBm.
>>>>
>>>> 04:56:56.847762 [RLC ] [I] BCCH TXSCH message received.
>>>>
>>>> 0000: 40 40 04 03 00 07 00 19 b0 18 14 70 10 50 00 01
>>>>
>>>> 0010: 82 99
>>>>
>>>> 04:56:56.847921 [MAC ] [I] [00999] SCHED: Searching for DL dci for
>>>> SI-RNTI window_st=-1, window_len=-1
>>>>
>>>> 04:56:56.848013 [RRC ] [I] BCCH - Rx systemInformationBlockType1 (18 B)
>>>>
>>>> 04:56:56.848077 [RRC ] [I] Processing SIB1 (1/1)
>>>>
>>>> 04:56:56.848153 [RRC ] [I] SIB1 received, CellID=2817, si_window=20,
>>>> sib2_period=16
>>>>
>>>> 04:56:56.848186 [MAC ] [I] [01001] BSR: triggered_bsr_type=0, LCID
>>>> QUEUE status: 0: 0 1: 0
>>>>
>>>> 04:56:56.848312 [NAS ] [I] Found PLMN: Id=00101, TAC=7
>>>>
>>>> Found PLMN: Id=00101, TAC=7
>>>>
>>>> 04:56:56.848357 [NAS ] [I] Selecting Home PLMN Id=00101
>>>>
>>>> 04:56:56.848389 [RRC ] [I] PLMN Selected 00101
>>>>
>>>> 04:56:56.848428 [NAS ] [I] Generating attach request
>>>>
>>>> 04:56:56.848461 [NAS ] [I] Generating PDN Connectivity Request
>>>>
>>>> 04:56:56.848499 [NAS ] [I] Requesting IMSI attach (IMSI=001010123456789)
>>>>
>>>> 04:56:56.848800 [RRC ] [I] Initiation of Connection establishment
>>>> procedure
>>>>
>>>> 04:56:56.849549 [RRC ] [I] Set PDSCH-Config p_a=dB0
>>>>
>>>> 04:56:56.849600 [RRC ] [I] Set MAC default configuration
>>>>
>>>> 04:56:56.849634 [MAC ] [I] [01003] BSR: Configured timer reTX 2560 ms
>>>>
>>>> 04:56:56.849668 [RRC ] [I] Set MAC main config: harq-MaxReTX=5,
>>>> bsr-TimerReTX=2560, bsr-TimerPeriodic=-1
>>>>
>>>> 04:56:56.849701 [RRC ] [I] Configuring serving cell...
>>>>
>>>> 04:56:56.850004 [RRC ] [I] Cell has SIB1
>>>>
>>>> 04:56:56.850059 [RRC ] [I] Cell has no SIB2. Obtaining SIB2
>>>>
>>>> 04:56:56.850304 [MAC ] [I] [01004] SCHED: Searching for DL dci for
>>>> SI-RNTI window_st=1120, window_len=20
>>>>
>>>> 04:56:56.850356 [RRC ] [I] Instructed MAC to search for SIB2,
>>>> win_start=1120, win_len=20, period=16, sched_index=0
>>>>
>>>> 04:56:56.861054 [RRC ] [I] MEAS: New measurement earfcn=-1, pci=1
>>>> (serving), rsrp=-49.8 dBm.
>>>>
>>>> 04:56:56.882038 [RRC ] [I] MEAS: New measurement earfcn=-1, pci=1
>>>> (serving), rsrp=-54.4 dBm.
>>>>
>>>> 04:56:56.901354 [RRC ] [I] MEAS: New measurement earfcn=-1, pci=1
>>>> (serving), rsrp=-58.1 dBm.
>>>>
>>>> 04:56:56.922365 [RRC ] [I] MEAS: New measurement earfcn=-1, pci=1
>>>> (serving), rsrp=-55.9 dBm.
>>>>
>>>> 04:56:56.941744 [RRC ] [I] MEAS: New measurement earfcn=-1, pci=1
>>>> (serving), rsrp=-57.9 dBm.
>>>>
>>>> 04:56:56.960903 [RRC ] [I] MEAS: New measurement earfcn=-1, pci=1
>>>> (serving), rsrp=-57.1 dBm.
>>>>
>>>> 04:56:56.982305 [MAC ] [I] [01141] DL 0 (TB 0): newTX tbs=28, rv=2,
>>>> ack=KO, ndi=0
>>>>
>>>> --
>>>>
>>>> [ue.conf]
>>>>
>>>> [rf]
>>>>
>>>> dl_earfcn = 3650
>>>>
>>>> #dl_freq = 2680e6
>>>>
>>>> #ul_freq = 2560e6
>>>>
>>>> freq_offset = 0
>>>>
>>>> tx_gain = 80
>>>>
>>>> #rx_gain = 40
>>>>
>>>>
>>>> nof_radios = 1
>>>>
>>>> nof_rx_ant = 1
>>>>
>>>>
>>>>
>>>> device_name = soapy
>>>>
>>>> device_args = rxant=LNAL,txant=BAND1
>>>>
>>>> time_adv_nsamples = 40
>>>>
>>>> burst_preamble_us = auto
>>>>
>>>> continuous_tx = auto
>>>>
>>>>
>>>>
>>>>
>>>> Thankjs you
>>>> Office: +886.82812597 Mobile: +886 986-154449
>>>>
>>>> Mail: anson at mogame.com.tw <mailto:anson at mogame.com.tw>
>>>> <mailto:anson at mogame.com.tw <mailto:anson at mogame.com.tw>> <mailto:anson at mogame.com.tw <mailto:anson at mogame.com.tw>>
>>>>
>>>> MoGaMe Mobile Entertainment Co., Ltd. | www.mogame.com.tw <http://www.mogame.com.tw/>
>>>> <http://www.mogame.com.tw/ <http://www.mogame.com.tw/>>
>>>> <http://www.mogame.com.tw <http://www.mogame.com.tw/> <http://www.mogame.com.tw/ <http://www.mogame.com.tw/>>>
>>>> | http://android-javatai.blogspot.com/ <http://android-javatai.blogspot.com/>
>>>>
>>>> _______________________________________________
>>>> srslte-users mailing list
>>>> srslte-users at lists.softwareradiosystems.com <mailto:srslte-users at lists.softwareradiosystems.com>
>>>> <mailto:srslte-users at lists.softwareradiosystems.com <mailto:srslte-users at lists.softwareradiosystems.com>>
>>>> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users <http://www.softwareradiosystems.com/mailman/listinfo/srslte-users>
>>
>>
>> _______________________________________________
>> srslte-users mailing list
>> srslte-users at lists.softwareradiosystems.com <mailto:srslte-users at lists.softwareradiosystems.com>
>> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users <http://www.softwareradiosystems.com/mailman/listinfo/srslte-users>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20191002/8b970dad/attachment.htm>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: srsue.txt
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20191002/8b970dad/attachment.txt>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20191002/8b970dad/attachment-0001.htm>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: enb.txt
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20191002/8b970dad/attachment-0001.txt>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20191002/8b970dad/attachment-0002.htm>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: srsepc.txt
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20191002/8b970dad/attachment-0002.txt>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20191002/8b970dad/attachment-0003.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 9871 bytes
Desc: not available
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20191002/8b970dad/attachment.png>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20191002/8b970dad/attachment-0004.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.png
Type: image/png
Size: 81874 bytes
Desc: not available
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20191002/8b970dad/attachment-0001.png>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20191002/8b970dad/attachment-0005.htm>
More information about the srsran-users
mailing list