[srslte-users] Building srsLTE on RasPi 4 Buster...

[Ralph A. Schmid, dk5ras]

My setup looks like this:

sudo iptables -t nat -A POSTROUTING -o wlan0 -j MASQUERADE &
sudo iptables -A FORWARD -i wlan0 -o srs_spgw_sgi -m state --state RELATED,ESTABLISHED -j ACCEPT &
sudo iptables -A FORWARD -i srs_spgw_sgi -o wlan0 -j ACCEPT

With best regards

Ralph.

> -----Original Message-----
> From: srslte-users [mailto:srslte-users-
> bounces at lists.softwareradiosystems.com] On Behalf Of
> cswiger at swigerco.com
> Sent: 25 October, 2019 14:02
> To: srslte-users
> Subject: [srslte-users] Building srsLTE on RasPi 4 Buster...
> 
> 
> Others will know better, usual way on other projects is:
> /sbin/iptables -t nat -A POSTROUTING -o wlan0 -j MASQUERADE
> 
> 
> https://learn.sparkfun.com/tutorials/setting-up-a-raspberry-pi-3-as-an-
> access-point/enable-packet-forwarding
> 
> 
> On Fri, Oct 25, 2019 at 7:37 AM Ralph A. Schmid, dk5ras
> <ralph at schmid.xxx> wrote:
> > Now I need to find a way to NAT between wlan0 and srs_spgw_sgi, to
> > test internet access.
> 
> 
> 
> _______________________________________________
> srslte-users mailing list
> srslte-users at lists.softwareradiosystems.com
> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users