[srslte-users] LimeSDR configuration for srsenb

[Alexrodi]

Using the default configurations should work, have you flushed LimeSDR with the latest version?



Sent with ProtonMail Secure Email.

‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Monday, 28 October 2019 11:41, <cswiger at swigerco.com> wrote:

> On Sun, Oct 27, 2019 at 4:38 PM Scottmconway
> scottmconway at protonmail.com wrote:
>
> > On my functional installation, I have the device_name set to
> > "soapy". Was this a legacy option that changed? I >now only see auto
> > or bladerf as options.
>
> > If anyone has gotten either of these devices to work, could you
> > share your configuration files with me?
>
> Here's the non-commented out part of my working enb.conf -
> #device_name = auto is indeed commented out and default. earfcn
> changed to transmit in the ISM band where I have matching antenna.
>
> [enb]
> enb_id = 0x19B
> cell_id = 0x01
> phy_cell_id = 1
> tac = 0x0007
> mcc = 001
> mnc = 01
> mme_addr = 127.0.1.100
> gtp_bind_addr = 127.0.1.1
> s1c_bind_addr = 127.0.1.1
> n_prb = 15
>
> [enb_files]
> sib_config = sib.conf
> rr_config = rr.conf
> drb_config = drb.conf
>
> [rf]
> dl_earfcn = 3451
> tx_gain = 80
> rx_gain = 40
>
> [pcap]
> enable = false
> filename = /tmp/enb.pcap
>
> [log]
> all_level = warning
> all_hex_limit = 32
> filename = /tmp/enb.log
> file_max_size = -1
>
> [gui]
> enable = false
>
> [scheduler]
> pusch_max_mcs = 16
> nof_ctrl_symbols = 3
>
> [expert]
>
> srslte-users mailing list
> srslte-users at lists.softwareradiosystems.com
> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users