[srslte-users] RES: B210 is not recognized as USB3 device in Ubuntu 16.04 LTS
JOSE SINDI YAMAMOTO
sindi at innovatechtelecom.com
Thu Sep 5 01:57:32 UTC 2019
Hi John wu,
Thanks for your suggestion. I changed today the USB-3.0 port but the b210 is
still not recognized as USB-3. Next step would be to change the CYUSB3014
chip, but I wonder what could have damaged the chip ... I will tell you when
I change the chip. Best regards, Sindi.
De: john wu <john.wu.8899 at hotmail.com>
Enviada em: sábado, 20 de abril de 2019 23:26
Para: JOSE SINDI YAMAMOTO <sindi at innovatechtelecom.com>;
srslte-users at lists.softwareradiosystems.com
Assunto: Re: [srslte-users] B210 is not recognized as USB3 device in Ubuntu
16.04 LTS
Hi Jose,
that should be the usb3.0 port broken or the CYUSB3014 chip broken for the
usb3.0 part. if you have ability to change an usb3.0 port you can try it.
www.zhixun-wireless.top <http://www.zhixun-wireless.top/>
provide B210 SDR PA LNA duplexer
Best Regards
_____
From: srslte-users <srslte-users-bounces at lists.softwareradiosystems.com
<mailto:srslte-users-bounces at lists.softwareradiosystems.com> > on behalf of
JOSE SINDI YAMAMOTO <sindi at innovatechtelecom.com
<mailto:sindi at innovatechtelecom.com> >
Sent: Tuesday, April 16, 2019 4:36
To: srslte-users at lists.softwareradiosystems.com
<mailto:srslte-users at lists.softwareradiosystems.com>
Subject: [srslte-users] B210 is not recognized as USB3 device in Ubuntu
16.04 LTS
Hi everybody!
The USRP B210 used to work properly connected to USB 3.0 of my
Lenovo-ideapad-310-I5 with Ubuntu 16.04 LTS. Also, it used to work correctly
with USB 3.0 of Odroid XU4 with Ubuntu 16.04. But, suddenly B210 has stopped
being recognized as USB 3. It is literally connected to the USB 3.0 port but
is recognized as USB 2.0. I thought I had a problem with the USB 3.0 cable
but I tested it with 3 new USB 3.0 cables (1.8 meters) and the result is
always the same: B210 is only recognized as USB 2.0 device based on usrp
probe messages (see below).
This might be a common problem to many of you but I can’t solve it on my
own. Looking forward for a help to solve this problem. Best regards, Sindi.
root at innovatech-Lenovo-ideapad-310-15ISK:/home/innovatech/Desktop# lsusb -t
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/6p, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/12p, 480M
|__ Port 1: Dev 20, If 0, Class=Vendor Specific Class, Driver=, 480M
|__ Port 1: Dev 20, If 1, Class=Vendor Specific Class, Driver=, 480M
|__ Port 1: Dev 20, If 2, Class=Vendor Specific Class, Driver=, 480M
|__ Port 1: Dev 20, If 3, Class=Vendor Specific Class, Driver=, 480M
|__ Port 1: Dev 20, If 4, Class=Vendor Specific Class, Driver=, 480M
|__ Port 2: Dev 12, If 0, Class=Human Interface Device, Driver=usbhid,
12M
|__ Port 2: Dev 12, If 1, Class=Human Interface Device, Driver=usbhid,
12M
|__ Port 2: Dev 12, If 2, Class=Human Interface Device, Driver=usbhid,
12M
|__ Port 4: Dev 3, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 4: Dev 3, If 1, Class=Video, Driver=uvcvideo, 480M
|__ Port 7: Dev 5, If 0, Class=Wireless, Driver=btusb, 12M
|__ Port 7: Dev 5, If 1, Class=Wireless, Driver=btusb, 12M
root at innovatech-Lenovo-ideapad-310-15ISK:/home/innovatech/Desktop#
usb-devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh=12
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=04.04
S: Manufacturer=Linux 4.4.0-134-generic xhci-hcd
S: Product=xHCI Host Controller
S: SerialNumber=0000:00:14.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 20 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2500 ProdID=0020 Rev=00.00
S: Manufacturer=Ettus Research LLC
S: Product=USRP B200
S: SerialNumber=30C6283
C: #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=2mA
I: If#= 0 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I: If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I: If#= 2 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I: If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I: If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 12 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=045e ProdID=0745 Rev=06.34
S: Manufacturer=Microsoft
S: Product=Microsoft® Nano Transceiver v2.0
C: #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid
I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid
I: If#= 2 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=04f2 ProdID=b57d Rev=87.35
S: Manufacturer=Chicony Electronics Co.,Ltd.
S: Product=EasyCamera
S: SerialNumber=0001
C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=0e(video) Sub=01 Prot=00 Driver=uvcvideo
I: If#= 1 Alt= 0 #EPs= 0 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
T: Bus=01 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=8087 ProdID=0a2a Rev=00.01
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=5000 MxCh= 6
D: Ver= 3.00 Cls=09(hub ) Sub=00 Prot=03 MxPS= 9 #Cfgs= 1
P: Vendor=1d6b ProdID=0003 Rev=04.04
S: Manufacturer=Linux 4.4.0-134-generic xhci-hcd
S: Product=xHCI Host Controller
S: SerialNumber=0000:00:14.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
root at innovatech-Lenovo-ideapad-310-15ISK:/home/innovatech/Desktop#
uhd_usrp_probe
[INFO] [UHD] linux; GNU C++ version 5.4.0 20160609; Boost_105800;
UHD_3.14.0.0-release
[INFO] [B200] Detected Device: B210
[INFO] [B200] Operating over USB 2.
[INFO] [B200] Initialize CODEC control...
[INFO] [B200] Initialize Radio control...
[INFO] [B200] Performing register loopback test...
[INFO] [B200] Register loopback test passed
[INFO] [B200] Performing register loopback test...
[INFO] [B200] Register loopback test passed
[INFO] [B200] Setting master clock rate selection to 'automatic'.
[INFO] [B200] Asking for clock rate 16.000000 MHz...
[INFO] [B200] Actually got clock rate 16.000000 MHz.
_____________________________________________________
/
| Device: B-Series Device
| _____________________________________________________
| /
| | Mboard: B210
| | revision: 4
| | product: 2
| | serial: 30C6283
| | name: MyB210
| | FW Version: 8.0
| | FPGA Version: 16.0
| |
| | Time sources: none, internal, external, gpsdo
| | Clock sources: internal, external, gpsdo
| | Sensors: ref_locked
| | _____________________________________________________
| | /
| | | RX DSP: 0
| | |
| | | Freq range: -8.000 to 8.000 MHz
| | _____________________________________________________
| | /
| | | RX DSP: 1
| | |
| | | Freq range: -8.000 to 8.000 MHz
| | _____________________________________________________
| | /
| | | RX Dboard: A
| | | _____________________________________________________
| | | /
| | | | RX Frontend: A
| | | | Name: FE-RX2
| | | | Antennas: TX/RX, RX2
| | | | Sensors: temp, rssi, lo_locked
| | | | Freq range: 50.000 to 6000.000 MHz
| | | | Gain range PGA: 0.0 to 76.0 step 1.0 dB
| | | | Bandwidth range: 200000.0 to 56000000.0 step 0.0 Hz
| | | | Connection Type: IQ
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | RX Frontend: B
| | | | Name: FE-RX1
| | | | Antennas: TX/RX, RX2
| | | | Sensors: temp, rssi, lo_locked
| | | | Freq range: 50.000 to 6000.000 MHz
| | | | Gain range PGA: 0.0 to 76.0 step 1.0 dB
| | | | Bandwidth range: 200000.0 to 56000000.0 step 0.0 Hz
| | | | Connection Type: IQ
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | RX Codec: A
| | | | Name: B210 RX dual ADC
| | | | Gain Elements: None
| | _____________________________________________________
| | /
| | | TX DSP: 0
| | |
| | | Freq range: -8.000 to 8.000 MHz
| | _____________________________________________________
| | /
| | | TX DSP: 1
| | |
| | | Freq range: -8.000 to 8.000 MHz
| | _____________________________________________________
| | /
| | | TX Dboard: A
| | | _____________________________________________________
| | | /
| | | | TX Frontend: A
| | | | Name: FE-TX2
| | | | Antennas: TX/RX
| | | | Sensors: temp, lo_locked
| | | | Freq range: 50.000 to 6000.000 MHz
| | | | Gain range PGA: 0.0 to 89.8 step 0.2 dB
| | | | Bandwidth range: 200000.0 to 56000000.0 step 0.0 Hz
| | | | Connection Type: IQ
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | TX Frontend: B
| | | | Name: FE-TX1
| | | | Antennas: TX/RX
| | | | Sensors: temp, lo_locked
| | | | Freq range: 50.000 to 6000.000 MHz
| | | | Gain range PGA: 0.0 to 89.8 step 0.2 dB
| | | | Bandwidth range: 200000.0 to 56000000.0 step 0.0 Hz
| | | | Connection Type: IQ
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | TX Codec: A
| | | | Name: B210 TX dual DAC
| | | | Gain Elements: None
J. Sindi Yamamoto, Ph.D
Phone: +55-19-25114669
Cel.: +55-19-981323663
E-mail: sindi at innovatechtelecom.com <mailto:sindi at innovatechtelecom.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20190904/75a0a2b4/attachment.htm>
More information about the srsran-users
mailing list