[srslte-users] RA procedure is not working

Thu Apr 9 19:19:04 UTC 2020

Hi,

Ok, I'll take a look.
If eNB doesn't decode Msg3, it sends ACK/NACK on PHICH anyway?
In this picture, which one is Msg3? PUSCH?
[image: UL_HARQ_NonAdaptive.png]
Because in my case, in the log I get 3 Nacks and 1 Ack. But the last one
doesn't go to the MAC layer for some reason. The received Ack is this line
I think:
19:33:15.167099 [PHY0] [I] [08700] PHICH: hi=1, corr=0.0, I_lowest=1,
n_dmrs=0, I_phich=0

So do you think still eNB is not decoding Msg3?

Best,
Samie

On Thu, 9 Apr 2020 at 21:01, Andre Puschmann <
andre.puschmann at softwareradiosystems.com> wrote:

> Hi,
>
> the eNB doesn't seem to be able to decode Msg3. DL looks good so I guess
> you have to check the eNB logs to find out more.
>
> Cheers
> Andre
>
> On 8/4/20 13:17, Samie Mostafavi wrote:
> > Hi,
> >
> > I want to connect a srsUE to an OAI enodeB. RA procedure does not finish
> > successfully and I dont understand where the problem is. These are the
> > events happen after each PRACH in the srsUE log:
> >
> > 19:33:15.124011 [PHY0] [I] [08656] PRACH: Transmitted preamble=23,
> > tti_tx=8661, CFO=-0.38 KHz, nof_sf=1, target_power=-76.0 dBm
> > 19:33:15.124042 [MAC ] [I] [08658] RA:    PDCCH:  seq=23, ra-rnti=0x2,
> > ra-tti=8661, f_id=0
> > 19:33:15.126059 [RRC ] [I] MEAS:  New measurement earfcn=-1, pci=0
> > (serving), rsrp=-58.1 dBm.
> > 19:33:15.133041 [PHY0] [I] [08666] PDCCH: cc=0, f=1A, cce= 0, L=2,
> > riv=75, pid=0, mcs={0}, rv={0}, ndi={0}, tpc_pucch=0, snr=32.7 dB
> > 19:33:15.133077 [PHY0] [I] [08666] PDSCH: cc=0, rnti=0x2, nof_prb=4,
> > nof_re=600, tbs={7}, mod={2}, rv={0}, crc={OK}, it=0.5, snr=32.7 dB
> > 19:33:15.133085 [PHY0] [I] [08666] Applying time_adv_sec=11.5 us,
> > next_offset=-66
> > 19:33:15.133091 [PHY0] [I] [08666] PHY:   Set TA RAR: ta_cmd: 22, n_ta:
> > 352, ta_usec: 11.5
> > 19:33:15.133096 [MAC ] [I] [08667] RA:    Rx:     RAPID=23, TA=22,
> > T-CRNTI=0xa2d
> > 19:33:15.135037 [MAC ] [I] [08668] UL 0:  New TX for Msg3, RV=0, TBS=18
> > 19:33:15.135115 [PHY0] [I] [08668] PUSCH: cc=0, tti_tx=8672, rnti=0xa2d,
> > rb=(1,1), nof_re=144, tbs=18, mod=2, rv=0
> > 19:33:15.135159 [MAC ] [I] [08669] RA:    ConRes: Starting
> > ContentionResolutionTimer=48 ms
> > 19:33:15.143080 [PHY0] [I] [08676] PHICH: hi=0, corr=0.7, I_lowest=1,
> > n_dmrs=0, I_phich=0
> > 19:33:15.143100 [MAC ] [I] [08677] RA:    ConRes: Restarting
> > ContentionResolutionTimer=48 ms
> > 19:33:15.143106 [MAC ] [I] [08677] UL 0:  Non-Adaptive retx=1, RV=2,
> > TBS=18, HI=NACK
> > 19:33:15.143165 [PHY0] [I] [08676] PUSCH: cc=0, tti_tx=8680, rnti=0xa2d,
> > rb=(1,1), nof_re=144, tbs=18, mod=2, rv=2
> > 19:33:15.145937 [RRC ] [I] MEAS:  New measurement earfcn=-1, pci=0
> > (serving), rsrp=-58.1 dBm.
> > 19:33:15.150894 [PHY0] [I] [08684] PHICH: hi=0, corr=0.7, I_lowest=1,
> > n_dmrs=0, I_phich=0
> > 19:33:15.150921 [MAC ] [I] [08685] RA:    ConRes: Restarting
> > ContentionResolutionTimer=48 ms
> > 19:33:15.150932 [MAC ] [I] [08685] UL 0:  Non-Adaptive retx=2, RV=3,
> > TBS=18, HI=NACK
> > 19:33:15.150987 [PHY0] [I] [08684] PUSCH: cc=0, tti_tx=8688, rnti=0xa2d,
> > rb=(1,1), nof_re=144, tbs=18, mod=2, rv=3
> > 19:33:15.158932 [PHY0] [I] [08692] PHICH: hi=0, corr=0.7, I_lowest=1,
> > n_dmrs=0, I_phich=0
> > 19:33:15.158949 [MAC ] [I] [08693] RA:    ConRes: Restarting
> > ContentionResolutionTimer=48 ms
> > 19:33:15.158952 [MAC ] [I] [08693] UL 0:  Non-Adaptive retx=3, RV=1,
> > TBS=18, HI=NACK
> > 19:33:15.159006 [PHY0] [I] [08692] PUSCH: cc=0, tti_tx=8696, rnti=0xa2d,
> > rb=(1,1), nof_re=144, tbs=18, mod=2, rv=1
> > 19:33:15.166129 [RRC ] [I] MEAS:  New measurement earfcn=-1, pci=0
> > (serving), rsrp=-58.1 dBm.
> > 19:33:15.167099 [PHY0] [I] [08700] PHICH: hi=1, corr=0.0, I_lowest=1,
> > n_dmrs=0, I_phich=0
> > 19:33:15.167111 [MAC ] [I] [08701] RA:    ConRes: Restarting
> > ContentionResolutionTimer=48 ms
> > 19:33:15.186139 [RRC ] [I] MEAS:  New measurement earfcn=-1, pci=0
> > (serving), rsrp=-58.1 dBm.
> > 19:33:15.206077 [RRC ] [I] MEAS:  New measurement earfcn=-1, pci=0
> > (serving), rsrp=-58.1 dBm.
> > 19:33:15.214878 [MAC ] [I] [08749] RA:    ConRes: Contention Resolution
> > Timer expired. Stopping PDCCH Search and going to Response Error
> >
> > The log file is also attached. Thank you for your help in advance!
> > --
> > Samie
> >
> > _______________________________________________
> > srslte-users mailing list
> > srslte-users at lists.softwareradiosystems.com
> > http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20200409/e78269d5/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: UL_HARQ_NonAdaptive.png
Type: image/png
Size: 19024 bytes
Desc: not available
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20200409/e78269d5/attachment.png>