[srslte-users] Info about srsUE and UHD

[Taillefer Simon]

Dear all,

I am working with the srsLTE software using two laptops (Ubuntu 18.04) and two SDRs (NI USRP 2901).
I am able to correctly use these SDRs as B210 from Ettus Research by flashing the FPGA image and firmware with UHD.

I tried to run the whole system with the 3.14.1 and 3.9LTS versions, but I am not sure about the most adapted release of UHD even if it works with both.
Which one do you recommend to use?

Also, I have some messages printed when on the terminal running srsUE and I could not find anything about on the GitHub and mailing list.

-          "Error encoding PUSCH: invalid L_prb=" with different numbers and from /lib/src/phy/phch/pusch.c

-          "Error encoding PUSCH" from /lib/src/phy/ue/ue_ul.c

-          "Configuring resource allocation" from /lib/src/phy/phch/ra_dl.c which is the most recurrent message

Do you know if I should take care of these messages and how to fix them or if there are not important because the LTE network is still working with?

Thank you in advance for your help.

Best regards,

Simon



-WARNING: This message contains confidential and/or proprietary information which may be subject to privilege or immunity and which is intended for the use of its addressee only.
Should you receive this message in error, you are kindly requested to inform the sender and to definitively remove it from any paper or electronic format.
Any other use of this e-mail is strictly forbidden. Thank you in advance for your cooperation.

Please consider the environment before printing this e-mail.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20200423/268a8a6f/attachment.htm>