[srslte-users] combined attach from srsue using ZeroMQ

[Andre Puschmann]

Alex,

the message is generated by the NAS layer of the UE.

The source can be found in nas.cc

Cheers
Andre

https://github.com/srsLTE/srsLTE/blob/master/srsue/src/stack/upper/nas.cc

On 24/8/20 14:19, Alexander Serkin wrote:
> Dear friends, has anybody an advice on this?
> The idea is to modify EPS attach type value to 2 (Combined EPS/IMSI
> attach) in Initial UE message.
> Can you please point me on this data within source code in order to try
> another value if that makes any sence?
> 
> Many thanks,
> Alex
> 
> 
> 
> On Thu, 2020-08-13 at 15:45 +0300, Alexander Serkin wrote:
>> Dear colleagues
>> My question is about the possibility to simulate combined attach from
>> srsue using zeromq driver. Is it possible somehow? I looked through
>> the UE config but did not find anything about that. My intention is to
>> test some staff regarding the SGs interface on my lab MME node. That
>> is combined attached is needed for.
>>
>> Thank you !
>> Alex
> 
> _______________________________________________
> srslte-users mailing list
> srslte-users at lists.softwareradiosystems.com
> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
>