[srslte-users] USRP x310 srsLTE v19.12.0

[ADRIAN GALLEGO SANCHEZ]

Hi all,

I am new to srsLTE and I have just installed srsLTE latest version on an
Ubuntu 16.04 LTS server with the apt package manager and I am trying to
launch it with UHD "v3.13.0.HEAD-0-g5b236772" and a x310 USRP with the
proper FPGA image for that driver version.
In order to configure the eNB I have edited the enb.conf file as follows:

   - *Section [enb]:* Edited tac, mcc, mnc and IP addresses in order to
   match the server network conf.
   - *Section [rf]:* device_name set to "UHD" and device_args set to
   "type=X300,ip_address=192.168.40.34"

Unfortunately, when I execute "sudo srsenb" I get prompted with the
following error message:

"Built in RelWithDebInfo mode using 19.12.0.

---  Software Radio Systems LTE eNodeB  ---

Reading configuration file /home/cguerrero/.config/srslte/enb.conf...
Opening 1 RF devices with 1 RF channels...
[INFO] [UHD] linux; GNU C++ version 5.4.0 20160609; Boost_105800;
UHD_3.13.0.HEAD-0-g5b236772
[INFO] [LOGGING] Fastpath logging disabled at runtime.
Opening USRP with args:
type=X300,ip_address=192.168.40.34,master_clock_rate=23.04e6
Error opening UHD: code 11
/build/srslte-R8VJAH/srslte-19.12/lib/src/radio/radio.cc.36: Error opening
RF device

Failed to find device UHD with args type=X300,ip_address=192.168.40.34
Error initializing radio."

Any clue of what might be happening?

PS: USRP is connected via Ethernet and "uhd_usrp_probe" command and
gnu-radio tests work properly.

Kind regards,

Adrián.

-- 
ADRIÁN GALLEGO SÁNCHEZ
Office: 4.1.C01 - TORRES QUEVEDO (Leganés)
<https://maps.google.com/?q=Universidad+Carlos+III+de+Madrid&ftid=0xd41898b2a00186d:0x99bb83fa92c87e40>
Phone: +34 916 24 88 59
University Carlos III (Madrid) - NETCOM Researcher
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20200218/1fa7500a/attachment.htm>