[srslte-users] USRP x310 srsLTE v19.12.0

[ADRIAN GALLEGO SANCHEZ]

Hi Andre,

Thanks for the response. I have tried to compile srsLTE from source
following the steps indicated in the github page (
https://github.com/srsLTE/srsLTE) but it is not compiling; some warnings
appeared and, as "-Werror" flag is set, compiling halts. I have also tried
to manually remove "-Werror" flags from the proper "flags.make" and
"link.txt" files but new error messages pop-up.
I have attached both make command outputs in the e-mail.

Kind regards,

Adrián.

El mar., 18 feb. 2020 a las 21:40, Andre Puschmann (<
andre.puschmann at softwareradiosystems.com>) escribió:

> Hi,
>
> the UHD version on your system and the one the UHD version the srsLTE
> package was compiled with need to match. I don't think 16.04 was
> compiled with UHD 3.13. If you need to use this, you need to compile
> srsLTE from source.
>
> Cheers
> Andre
>
>
> On 18/2/20 16:47, ADRIAN GALLEGO SANCHEZ wrote:
> > Hi all,
> >
> > I am new to srsLTE and I have just installed srsLTE latest version on an
> > Ubuntu 16.04 LTS server with the apt package manager and I am trying to
> > launch it with UHD "v3.13.0.HEAD-0-g5b236772" and a x310 USRP with the
> > proper FPGA image for that driver version.
> > In order to configure the eNB I have edited the enb.conf file as follows:
> >
> >   * *Section [enb]:* Edited tac, mcc, mnc and IP addresses in order to
> >     match the server network conf.
> >   * *Section [rf]:* device_name set to "UHD" and device_args set to
> >     "type=X300,ip_address=192.168.40.34"
> >
> > Unfortunately, when I execute "sudo srsenb" I get prompted with the
> > following error message:
> >
> > "Built in RelWithDebInfo mode using 19.12.0.
> >
> > ---  Software Radio Systems LTE eNodeB  ---
> >
> > Reading configuration file /home/cguerrero/.config/srslte/enb.conf...
> > Opening 1 RF devices with 1 RF channels...
> > [INFO] [UHD] linux; GNU C++ version 5.4.0 20160609; Boost_105800;
> > UHD_3.13.0.HEAD-0-g5b236772
> > [INFO] [LOGGING] Fastpath logging disabled at runtime.
> > Opening USRP with args:
> > type=X300,ip_address=192.168.40.34,master_clock_rate=23.04e6
> > Error opening UHD: code 11
> > /build/srslte-R8VJAH/srslte-19.12/lib/src/radio/radio.cc.36: Error
> > opening RF device
> >
> > Failed to find device UHD with args type=X300,ip_address=192.168.40.34
> > Error initializing radio."
> >
> > Any clue of what might be happening?
> >
> > PS: USRP is connected via Ethernet and "uhd_usrp_probe" command and
> > gnu-radio tests work properly.
> >
> > Kind regards,
> >
> > Adrián.
> >
> > --
> > ADRIÁN GALLEGO SÁNCHEZ
> > Office: 4.1.C01 - TORRES QUEVEDO (Leganés)
> > <
> https://maps.google.com/?q=Universidad+Carlos+III+de+Madrid&ftid=0xd41898b2a00186d:0x99bb83fa92c87e40
> >
> > Phone: +34 916 24 88 59
> > University Carlos III (Madrid) - NETCOM Researcher
> >
> > _______________________________________________
> > srslte-users mailing list
> > srslte-users at lists.softwareradiosystems.com
> > http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
> >
>
>

-- 
ADRIÁN GALLEGO SÁNCHEZ
Office: 4.1.C01 - TORRES QUEVEDO (Leganés)
<https://maps.google.com/?q=Universidad+Carlos+III+de+Madrid&ftid=0xd41898b2a00186d:0x99bb83fa92c87e40>
Phone: +34 916 24 88 59
University Carlos III (Madrid) - NETCOM Researcher
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20200219/edfe444e/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: make_with_Werror_flag.log
Type: application/octet-stream
Size: 22149 bytes
Desc: not available
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20200219/edfe444e/attachment.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: make_without_Werror_flag.log
Type: application/octet-stream
Size: 20101 bytes
Desc: not available
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20200219/edfe444e/attachment-0001.obj>