[srslte-users] srsUE 20.04.1: Can't open RF frontend (NI USRP 2944 with UHD FPGA Image) - Error: Radio does not provide RF information / Error opening UHD: code 43
Marc T.
m.triefelder at gmail.com
Thu Jun 4 08:19:39 UTC 2020
Hi Xavier,
thank you very much - the device_args = type=x300 or „device_args = type=x300,master_clock_rate=184.32e6,recv_frame_size=9232,send_frame_size=9232“ did the trick.
But somehow the x300 is quite unstable - whereby i think my settings makes it unstable, i get a lo of lates or other different issues. see below please.
I tested before with a LimeSDR, which was kinda stable. so in general the setup is/was working.
So i wanted to ask if you have ue.conf cfg examples for me for the x300; connected via 10G or 1G and one or more antennas (the 2944 hast the two 160Mhz Daughterboards). Or is there something like a best practise regarding the x300?
Is it even possible to run the x300 stable with the 1g connection only? So far i tested 1G and 10G, whereby i think the 10G connections seems to work better - just my feelings.
step by step i figured out the different side stetting on the host pc; like the MTU size for 10G MTU9232 or other things like the system settings "sysctl -w net.core.wmem_max=24862979“.
Basically i m happy already as i had an attach already, but after that something goes wrong. so it would be cool to get some other configurations / hints to compare/follow.
I would like to follow these to rule out selfmade issues before i come back with a real error or something like this.
Thank you very much,
Marc
Some of my issues with different configurations in the ue.conf.
For example here:
sml at sml-b56a-poc:~$ sudo ./srsue-v20.04.1 ue-v20.04-Xavier-VPN-Sky5-TEST.conf
Reading configuration file ue-v20.04-Xavier-VPN-Sky5-TEST.conf...
Built in Release mode using commit c892ae56b on branch master.
Opening 1 channels in RF device=UHD with args=type=x300,master_clock_rate=184.32e6
[INFO] [UHD] linux; GNU C++ version 7.4.0; Boost_106501; UHD_3.14.1.1-release
[INFO] [LOGGING] Fastpath logging disabled at runtime.
Opening USRP channels=1, args: type=x300,master_clock_rate=184.32e6,master_clock_rate=184.32e6
[INFO] [X300] X300 initialization sequence...
[INFO] [X300] Maximum frame size: 8000 bytes.
[INFO] [X300] Radio 1x clock: 184.32 MHz
[INFO] [0/DmaFIFO_0] Initializing block control (NOC ID: 0xF1F0D00000000000)
[INFO] [0/DmaFIFO_0] BIST passed (Throughput: 1300 MB/s)
[INFO] [0/DmaFIFO_0] BIST passed (Throughput: 1317 MB/s)
[INFO] [0/Radio_0] Initializing block control (NOC ID: 0x12AD100000000001)
[INFO] [0/Radio_1] Initializing block control (NOC ID: 0x12AD100000000001)
[INFO] [0/DDC_0] Initializing block control (NOC ID: 0xDDC0000000000000)
[INFO] [0/DDC_1] Initializing block control (NOC ID: 0xDDC0000000000000)
[INFO] [0/DUC_0] Initializing block control (NOC ID: 0xD0C0000000000000)
[INFO] [0/DUC_1] Initializing block control (NOC ID: 0xD0C0000000000000)
Waiting PHY to initialize ... done!
Attaching UE...
..
.
Found Cell: Mode=FDD, PCI=30, PRB=50, Ports=2, CFO=1.2 KHz
Found PLMN: Id=26222, TAC=123
Random Access Transmission: seq=31, ra-rnti=0x2
Random Access Complete. c-rnti=0xa413, ta=5
RRC Connected
Network attach successful. IP: 10.3.30.7
TestNet (TestNet) 3/6/2020 23:20:52 TZ:0
RF status: O=0, U=1, L=175303
Scheduling request failed: releasing RRC connection...
Random Access Transmission: seq=29, ra-rnti=0x2
Random Access Complete. c-rnti=0xa413, ta=4
Random Access Transmission: seq=16, ra-rnti=0x2
Random Access Transmission: seq=30, ra-rnti=0x2
Random Access Complete. c-rnti=0xa413, ta=4
Random Access Transmission: seq=13, ra-rnti=0x2
Random Access Complete. c-rnti=0xa413, ta=5
RF status: O=0, U=1, L=125077
Random Access Transmission: seq=16, ra-rnti=0x2
Random Access Transmission: seq=30, ra-rnti=0x2
Random Access Complete. c-rnti=0xa413, ta=4
Random Access Transmission: seq=6, ra-rnti=0x2
Random Access Complete. c-rnti=0xa413, ta=5
Random Access Transmission: seq=30, ra-rnti=0x2
Random Access Complete. c-rnti=0xa413, ta=4
Random Access Transmission: seq=26, ra-rnti=0x2
Random Access Complete. c-rnti=0xa413, ta=4
Random Access Transmission: seq=1, ra-rnti=0x2
Random Access Complete. c-rnti=0xa413, ta=4
Random Access Transmission: seq=16, ra-rnti=0x2
Random Access Complete. c-rnti=0xa413, ta=4
Random Access Transmission: seq=31, ra-rnti=0x2
Random Access Complete. c-rnti=0xa413, ta=5
Random Access Transmission: seq=31, ra-rnti=0x2
Random Access Complete. c-rnti=0xa413, ta=5
RF status: O=0, U=1, L=14435
Random Access Transmission: seq=10, ra-rnti=0x2
Random Access Complete. c-rnti=0xa413, ta=5
Random Access Transmission: seq=24, ra-rnti=0x2
Random Access Complete. c-rnti=0xa413, ta=5
Random Access Transmission: seq=29, ra-rnti=0x2
Random Access Complete. c-rnti=0xa413, ta=4
Random Access Transmission: seq=12, ra-rnti=0x2
Random Access Complete. c-rnti=0xa413, ta=4
Random Access Transmission: seq=29, ra-rnti=0x2
Random Access Complete. c-rnti=0xa413, ta=4
Random Access Transmission: seq=18, ra-rnti=0x2
Random Access Complete. c-rnti=0xa413, ta=5
Random Access Transmission: seq=7, ra-rnti=0x2
Random Access Complete. c-rnti=0xa413, ta=5
Random Access Transmission: seq=26, ra-rnti=0x2
Random Access Complete. c-rnti=0xa413, ta=4
RF status: O=0, U=1, L=12847
Random Access Transmission: seq=28, ra-rnti=0x2
Random Access Complete. c-rnti=0xa413, ta=4
Random Access Transmission: seq=24, ra-rnti=0x2
Random Access Complete. c-rnti=0xa413, ta=5
Random Access Transmission: seq=3, ra-rnti=0x2
Random Access Transmission: seq=8, ra-rnti=0x2
Random Access Transmission: seq=23, ra-rnti=0x2
Random Access Transmission: seq=29, ra-rnti=0x2
Random Access Transmission: seq=11, ra-rnti=0x2
Random Access Transmission: seq=24, ra-rnti=0x2
RF status: O=0, U=1, L=32313
Random Access Transmission: seq=25, ra-rnti=0x2
Random Access Transmission: seq=27, ra-rnti=0x2
Random Access Transmission: seq=30, ra-rnti=0x2
Random Access Transmission: seq=24, ra-rnti=0x2
Warning: Detected Radio-Link Failure
RRC Connection Reestablishment
Random Access Transmission: seq=11, ra-rnti=0x2
Random Access Complete. c-rnti=0x4a86, ta=5
Reestablishment Reject
RRC IDLE
Random Access Transmission: seq=30, ra-rnti=0x2
Random Access Complete. c-rnti=0xe655, ta=4
RRC Connected
RF status: O=0, U=1, L=29466
RF status: O=0, U=0, L=174545
RF status: O=0, U=0, L=141839
RF status: O=0, U=0, L=151456
RF status: O=0, U=0, L=165226
Scheduling request failed: releasing RRC connection...
Random Access Transmission: seq=14, ra-rnti=0x2
Random Access Transmission: seq=22, ra-rnti=0x2
Random Access Transmission: seq=7, ra-rnti=0x2
Random Access Transmission: seq=6, ra-rnti=0x2
Random Access Complete. c-rnti=0xe655, ta=4
Random Access Transmission: seq=5, ra-rnti=0x2
Random Access Complete. c-rnti=0xe655, ta=4
Random Access Transmission: seq=9, ra-rnti=0x2
Random Access Complete. c-rnti=0xe655, ta=5
Random Access Transmission: seq=27, ra-rnti=0x2
RF status: O=0, U=1, L=102252
Random Access Complete. c-rnti=0xe655, ta=4
Random Access Transmission: seq=15, ra-rnti=0x2
Random Access Complete. c-rnti=0xe655, ta=5
Random Access Transmission: seq=3, ra-rnti=0x2
...
Random Access Complete. c-rnti=0xe655, ta=5
Random Access Transmission: seq=11, ra-rnti=0x2
Random Access Complete. c-rnti=0xe655, ta=5
Random Access Transmission: seq=22, ra-rnti=0x2
Random Access Complete. c-rnti=0xe655, ta=4
RF status: O=0, U=1, L=17582
Random Access Transmission: seq=19, ra-rnti=0x2
Random Access Complete. c-rnti=0xe655, ta=4
Random Access Transmission: seq=25, ra-rnti=0x2
Random Access Complete. c-rnti=0xe655, ta=4
Random Access Transmission: seq=7, ra-rnti=0x2
Random Access Complete. c-rnti=0xe655, ta=5
Random Access Transmission: seq=22, ra-rnti=0x2
Random Access Transmission: seq=17, ra-rnti=0x2
Random Access Transmission: seq=27, ra-rnti=0x2
Random Access Transmission: seq=20, ra-rnti=0x2
Random Access Transmission: seq=30, ra-rnti=0x2
Random Access Transmission: seq=2, ra-rnti=0x2
Random Access Transmission: seq=0, ra-rnti=0x2
RF status: O=0, U=1, L=8144
Random Access Transmission: seq=19, ra-rnti=0x2
Random Access Transmission: seq=7, ra-rnti=0x2
Random Access Transmission: seq=23, ra-rnti=0x2
Warning: Detected Radio-Link Failure
RRC Connection Reestablishment
Random Access Transmission: seq=0, ra-rnti=0x2
Random Access Complete. c-rnti=0x6035, ta=5
Reestablishment Reject
RRC IDLE
Random Access Transmission: seq=4, ra-rnti=0x2
Random Access Complete. c-rnti=0xfc04, ta=5
RRC Connected
RF status: O=0, U=1, L=163705
/home/sml/srsLTE/lib/src/phy/mimo/precoding.c.1231: Error predecoding CCD: Invalid combination of ports 2 and rx antennax 1
/home/sml/srsLTE/lib/src/phy/phch/pdsch.c.993: Error predecoding
/home/sml/srsLTE/lib/src/phy/mimo/precoding.c.1231: Error predecoding CCD: Invalid combination of ports 2 and rx antennax 1
/home/sml/srsLTE/lib/src/phy/phch/pdsch.c.993: Error predecoding
# device_args_3: Arguments for the RF device driver 3.
/home/sml/srsLTE/lib/src/phy/mimo/precoding.c.1231: Error predecoding CCD: Invalid combination of ports 2 and rx antennax 1
/home/sml/srsLTE/lib/src/phy/phch/pdsch.c.993: Error predecoding
/home/sml/srsLTE/lib/src/phy/mimo/precoding.c.1231: Error predecoding CCD: Invalid combination of ports 2 and rx antennax 1
/home/sml/srsLTE/lib/src/phy/phch/pdsch.c.993: Error predecoding
/home/sml/srsLTE/lib/src/phy/mimo/precoding.c.1231: Error predecoding CCD: Invalid combination of ports 2 and rx antennax 1
/home/sml/srsLTE/lib/src/phy/phch/pdsch.c.993: Error predecoding
/home/sml/srsLTE/lib/src/phy/mimo/precoding.c.1231: Error predecoding CCD: Invalid combination of ports 2 and rx antennax 1
/home/sml/srsLTE/lib/src/phy/phch/pdsch.c.993: Error predecoding
/home/sml/srsLTE/lib/src/phy/mimo/precoding.c.1231: Error predecoding CCD: Invalid combination of ports 2 and rx antennax 1
/home/sml/srsLTE/lib/src/phy/phch/pdsch.c.993: Error predecoding
/home/sml/srsLTE/lib/src/phy/mimo/precoding.c.1231: Error predecoding CCD: Invalid combination of ports 2 and rx antennax 1
/home/sml/srsLTE/lib/src/phy/phch/pdsch.c.993: Error predecoding
/home/sml/srsLTE/lib/src/phy/mimo/precoding.c.1231: Error predecoding CCD: Invalid combination of ports 2 and rx antennax 1
/home/sml/srsLTE/lib/src/phy/phch/pdsch.c.993: Error predecoding
/home/sml/srsLTE/lib/src/phy/mimo/precoding.c.1231: Error predecoding CCD: Invalid combination of ports 2 and rx antennax 1
/home/sml/srsLTE/lib/src/phy/phch/pdsch.c.993: Error predecoding
/home/sml/srsLTE/lib/src/phy/mimo/precoding.c.1231: Error predecoding CCD: Invalid combination of ports 2 and rx antennax 1
/home/sml/srsLTE/lib/src/phy/phch/pdsch.c.993: Error predecoding
/home/sml/srsLTE/lib/src/phy/mimo/precoding.c.1231: Error predecoding CCD: Invalid combination of ports 2 and rx antennax 1
/home/sml/srsLTE/lib/src/phy/phch/pdsch.c.993: Error predecoding
/home/sml/srsLTE/lib/src/phy/mimo/precoding.c.1231: Error predecoding CCD: Invalid combination of ports 2 and rx antennax 1
/home/sml/srsLTE/lib/src/phy/phch/pdsch.c.993: Error predecoding
/home/sml/srsLTE/lib/src/phy/mimo/precoding.c.1231: Error predecoding CCD: Invalid combination of ports 2 and rx antennax 1
/home/sml/srsLTE/lib/src/phy/phch/pdsch.c.993: Error predecoding
/home/sml/srsLTE/lib/src/phy/mimo/precoding.c.1231: Error predecoding CCD: Invalid combination of ports 2 and rx antennax 1
/home/sml/srsLTE/lib/src/phy/phch/pdsch.c.993: Error predecoding
RF status: O=0, U=0, L=170046
RF status: O=0, U=0, L=186739
RF status: O=0, U=0, L=143951
RF status: O=0, U=0, L=179887
^CStopping ..
RF status: O=0, U=0, L=164557
Saving MAC PCAP file
Saving NAS PCAP file (DLT=148)
--- exiting ---
sml at sml-b56a-poc:~$
Or errors/issues like this:
sml at sml-b56a-poc:~$ sudo ./srsue-v20.04.1 ue-v20.04-Xavier-VPN-Sky5-TEST.conf
Reading configuration file ue-v20.04-Xavier-VPN-Sky5-TEST.conf...
Built in Release mode using commit c892ae56b on branch master.
Opening 1 channels in RF device=UHD with args=type=x300
[INFO] [UHD] linux; GNU C++ version 7.4.0; Boost_106501; UHD_3.14.1.1-release
[INFO] [LOGGING] Fastpath logging disabled at runtime.
Opening USRP channels=1, args: type=x300,master_clock_rate=184.32e6
[INFO] [X300] X300 initialization sequence...
[INFO] [X300] Maximum frame size: 8000 bytes.
[INFO] [X300] Radio 1x clock: 184.32 MHz
[INFO] [0/DmaFIFO_0] Initializing block control (NOC ID: 0xF1F0D00000000000)
[INFO] [0/DmaFIFO_0] BIST passed (Throughput: 1320 MB/s)
[INFO] [0/DmaFIFO_0] BIST passed (Throughput: 1305 MB/s)
[INFO] [0/Radio_0] Initializing block control (NOC ID: 0x12AD100000000001)
[INFO] [0/Radio_1] Initializing block control (NOC ID: 0x12AD100000000001)
[INFO] [0/DDC_0] Initializing block control (NOC ID: 0xDDC0000000000000)
[INFO] [0/DDC_1] Initializing block control (NOC ID: 0xDDC0000000000000)
[INFO] [0/DUC_0] Initializing block control (NOC ID: 0xD0C0000000000000)
[INFO] [0/DUC_1] Initializing block control (NOC ID: 0xD0C0000000000000)
Waiting PHY to initialize ... done!
Attaching UE...
..
.
Found Cell: Mode=FDD, PCI=30, PRB=50, Ports=2, CFO=2.1 KHz
Found PLMN: Id=26222, TAC=123
Random Access Transmission: seq=6, ra-rnti=0x2
Random Access Complete. c-rnti=0x97d3, ta=5
RRC Connected
Network attach successful. IP: 10.3.30.7
TestNet (TestNet) 3/6/2020 23:23:26 TZ:0
RF status: O=0, U=1, L=32565
RF status: O=0, U=0, L=184205
RF status: O=0, U=0, L=182227
RF status: O=0, U=0, L=182997
Scheduling request failed: releasing RRC connection...
Random Access Transmission: seq=6, ra-rnti=0x2
Random Access Transmission: seq=11, ra-rnti=0x2
Random Access Complete. c-rnti=0x97d3, ta=5
Random Access Transmission: seq=4, ra-rnti=0x2
Random Access Complete. c-rnti=0x97d3, ta=5
Random Access Transmission: seq=23, ra-rnti=0x2
Random Access Complete. c-rnti=0x97d3, ta=4
Random Access Transmission: seq=1, ra-rnti=0x2
Random Access Complete. c-rnti=0x97d3, ta=4
Random Access Transmission: seq=26, ra-rnti=0x2
Random Access Complete. c-rnti=0x97d3, ta=5
RF status: O=0, U=0, L=74907
Random Access Transmission: seq=18, ra-rnti=0x2
Random Access Complete. c-rnti=0x97d3, ta=5
….
Random Access Transmission: seq=20, ra-rnti=0x2
Random Access Complete. c-rnti=0x97d3, ta=5
Random Access Transmission: seq=6, ra-rnti=0x2
Random Access Complete. c-rnti=0x97d3, ta=4
Random Access Transmission: seq=3, ra-rnti=0x2
Random Access Complete. c-rnti=0x97d3, ta=4
/home/sml/srsLTE/lib/src/phy/phch/ra_dl.c.402: Computing TBS from f=1A, cce=12, L=2, rbg=0x0, pid=0, mcs={0}, ndi={0}, tpc_pucch=0
/home/sml/srsLTE/lib/src/phy/phch/ra_dl.c.627: Configuring TB Info
Random Access Transmission: seq=23, ra-rnti=0x2
Random Access Complete. c-rnti=0x97d3, ta=4
Random Access Transmission: seq=28, ra-rnti=0x2
Random Access Complete. c-rnti=0x97d3, ta=5
Random Access Transmission: seq=28, ra-rnti=0x2
Random Access Complete. c-rnti=0x97d3, ta=5
or like that
sml at sml-b56a-poc:~$ sudo ./srsue-v20.04.1 ue-v20.04-Xavier-VPN-Sky5-TEST.conf
Reading configuration file ue-v20.04-Xavier-VPN-Sky5-TEST.conf...
Built in Release mode using commit c892ae56b on branch master.
Opening 2 channels in RF device=UHD with args=type=x300
[INFO] [UHD] linux; GNU C++ version 7.4.0; Boost_106501; UHD_3.14.1.1-release
[INFO] [LOGGING] Fastpath logging disabled at runtime.
Opening USRP channels=2, args: type=x300,master_clock_rate=184.32e6
[INFO] [X300] X300 initialization sequence...
[INFO] [X300] Maximum frame size: 8000 bytes.
[INFO] [X300] Radio 1x clock: 184.32 MHz
[INFO] [0/DmaFIFO_0] Initializing block control (NOC ID: 0xF1F0D00000000000)
[INFO] [0/DmaFIFO_0] BIST passed (Throughput: 1305 MB/s)
[INFO] [0/DmaFIFO_0] BIST passed (Throughput: 1300 MB/s)
[INFO] [0/Radio_0] Initializing block control (NOC ID: 0x12AD100000000001)
[INFO] [0/Radio_1] Initializing block control (NOC ID: 0x12AD100000000001)
[INFO] [0/DDC_0] Initializing block control (NOC ID: 0xDDC0000000000000)
[INFO] [0/DDC_1] Initializing block control (NOC ID: 0xDDC0000000000000)
[INFO] [0/DUC_0] Initializing block control (NOC ID: 0xD0C0000000000000)
[INFO] [0/DUC_1] Initializing block control (NOC ID: 0xD0C0000000000000)
[INFO] [MULTI_USRP] 1) catch time transition at pps edge
[INFO] [MULTI_USRP] 2) set times next pps (synchronously)
Waiting PHY to initialize ... done!
Attaching UE...
..
..
.
Found Cell: Mode=FDD, PCI=30, PRB=50, Ports=2, CFO=1.2 KHz
[ERROR] [STREAMER] The receive packet handler failed to time-align packets.
1002 received packets were processed by the handler.
However, a timestamp match could not be determined.
Found PLMN: Id=26222, TAC=123
Random Access Transmission: seq=21, ra-rnti=0x2
Random Access Transmission: seq=31, ra-rnti=0x2
Random Access Transmission: seq=16, ra-rnti=0x2
Random Access Transmission: seq=4, ra-rnti=0x2
Random Access Transmission: seq=22, ra-rnti=0x2
Random Access Transmission: seq=4, ra-rnti=0x2
Random Access Transmission: seq=14, ra-rnti=0x2
Random Access Transmission: seq=14, ra-rnti=0x2
Random Access Transmission: seq=27, ra-rnti=0x2
Random Access Transmission: seq=6, ra-rnti=0x2
Warning: Detected Radio-Link Failure
RF status: O=2, U=4, L=33626
Warning buffer pool capacity is 4.992676 %
Warning buffer pool capacity is 4.986572 %
Warning buffer pool capacity is 4.986572 %
Warning buffer pool capacity is 4.980469 %
Warning buffer pool capacity is 4.974365 %
Warning buffer pool capacity is 4.968262 %
Warning buffer pool capacity is 4.962158 %
Warning buffer pool capacity is 4.956055 %
…
Warning buffer pool capacity is 4.840088 %
Warning buffer pool capacity is 4.833984 %
Warning buffer pool capacity is 4.840088 %
Warning buffer pool capacity is 4.833984 %
Warning buffer pool capacity is 4.833984 %
RF status: O=123, U=0, L=35687
[ERROR] [X300] 192.168.40.2: x300 fw communication failure #1
EnvironmentError: IOError: x300 fw poke32 - reply timed out
[ERROR] [X300] 192.168.40.2: x300 fw communication failure #2
EnvironmentError: IOError: x300 fw poke32 - reply timed out
[ERROR] [X300] 192.168.40.2: x300 fw communication failure #3
EnvironmentError: IOError: x300 fw poke32 - reply timed out
[ERROR] [UHD] An unexpected exception was caught in a task loop.The task loop will now exit, things may not work.EnvironmentError: IOError: 192.168.40.2: x300 fw communication failure #3
EnvironmentError: IOError: x300 fw poke32 - reply timed out
^CStopping ..
Saving MAC PCAP file
Saving NAS PCAP file (DLT=148)
Couldn't stop after 5s. Forcing exit.
Mit freundlichen Grüßen,
Best regards,
Marc Triefelder
E-Mail: m.triefelder at gmail.com
> Am 02.06.2020 um 10:03 schrieb Xavier Arteaga <xavier at softwareradiosystems.com>:
>
> Hi Marc,
> When RF device arguments are set, the device type needs to be specified. Otherwise, it picks the default master clock rate for AD9361 based devices (B200). This will be improved in the next release.
>
> Could you try adding type=x300 to the device args parameters? Also, you can specify the master clock rate as well.
>
> [rf]
> device_args = type=x300,master_clock_rate=184.32e6,recv_frame_size=9232,send_frame_size=9232
>
> Kind regards,
> Xavier
>
> On Tue, 2 Jun 2020 at 09:26, Marc T. <m.triefelder at gmail.com <mailto:m.triefelder at gmail.com>> wrote:
> HI srsLTE Team and Community,
>
> i have the issue srsUE can’t open my USRP 2944 (160MHz version). For sure i flashed there UHD Image on it. the 2944 is based on the Ettus x310 board, which should be supported actually…
> When i check the device from the console with the uhd_* commands ever this seems to be fine.
>
> But in the ue.log i can see the issue „Error: Radio does not provide RF information“ - Any Idea how to proceed in this case?
>
>
> Thank you very much in advance,
> Marc
>
> Here some infos:
>
>
> sml at sml-hp-b65a:~$ uhd_find_devices
> [INFO] [UHD] linux; GNU C++ version 7.4.0; Boost_106501; UHD_3.14.1.1-release
> --------------------------------------------------
> -- UHD Device 0
> --------------------------------------------------
> Device Address:
> serial: 31A3xxx
> addr: 192.168.10.2
> fpga: HG
> name:
> product: X310
> type: x300
>
>
> sml at sml-hp-b65a:~$ uhd_usrp_probe
> [INFO] [UHD] linux; GNU C++ version 7.4.0; Boost_106501; UHD_3.14.1.1-release
> [INFO] [X300] X300 initialization sequence...
> [INFO] [X300] Maximum frame size: 1472 bytes.
> [INFO] [X300] Radio 1x clock: 200 MHz
> [INFO] [0/DmaFIFO_0] Initializing block control (NOC ID: 0xF1F0D00000000000)
> [INFO] [0/DmaFIFO_0] BIST passed (Throughput: 1302 MB/s)
> [INFO] [0/DmaFIFO_0] BIST passed (Throughput: 1302 MB/s)
> [INFO] [0/Radio_0] Initializing block control (NOC ID: 0x12AD100000000001)
> [INFO] [0/Radio_1] Initializing block control (NOC ID: 0x12AD100000000001)
> [INFO] [0/DDC_0] Initializing block control (NOC ID: 0xDDC0000000000000)
> [INFO] [0/DDC_1] Initializing block control (NOC ID: 0xDDC0000000000000)
> [INFO] [0/DUC_0] Initializing block control (NOC ID: 0xD0C0000000000000)
> [INFO] [0/DUC_1] Initializing block control (NOC ID: 0xD0C0000000000000)
> _____________________________________________________
> /
> | Device: X-Series Device
> | _____________________________________________________
> | /
> | | Mboard: X310
> | | revision: 11
> | | revision_compat: 7
> | | product: 30806
> | | mac-addr0: 00:80:2f:26:a4:f5
> | | mac-addr1: 00:80:2f:26:a4:f6
> | | gateway: 192.168.10.1
> | | ip-addr0: 192.168.10.2
> | | subnet0: 255.255.255.0
> | | ip-addr1: 192.168.20.2
> | | subnet1: 255.255.255.0
> | | ip-addr2: 192.168.30.2
> | | subnet2: 255.255.255.0
> | | ip-addr3: 192.168.40.2
> | | subnet3: 255.255.255.0
> | | serial: 31A3xxx
> | | FW Version: 6.0
> | | FPGA Version: 35.1
> | | FPGA git hash: bb85bdf
> | | RFNoC capable: Yes
> | |
> | | Time sources: internal, external, gpsdo
> | | Clock sources: internal, external, gpsdo
> | | Sensors: ref_locked
> | | _____________________________________________________
> | | /
> | | | RX Dboard: A
> | | | ID: UBX-160 v1 (0x007a)
> | | | Serial: 31A0xxx
> | | | _____________________________________________________
> | | | /
> | | | | RX Frontend: 0
> | | | | Name: UBX RX
> | | | | Antennas: TX/RX, RX2, CAL
> | | | | Sensors: lo_locked
> | | | | Freq range: 10.000 to 6000.000 MHz
> | | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB
> | | | | Bandwidth range: 160000000.0 to 160000000.0 step 0.0 Hz
> | | | | Connection Type: IQ
> | | | | Uses LO offset: No
> | | | _____________________________________________________
> | | | /
> | | | | RX Codec: A
> | | | | Name: ads62p48
> | | | | Gain range digital: 0.0 to 6.0 step 0.5 dB
> | | _____________________________________________________
> | | /
> | | | RX Dboard: B
> | | | ID: UBX-160 v1 (0x007a)
> | | | Serial: 31A0xxx
> | | | _____________________________________________________
> | | | /
> | | | | RX Frontend: 0
> | | | | Name: UBX RX
> | | | | Antennas: TX/RX, RX2, CAL
> | | | | Sensors: lo_locked
> | | | | Freq range: 10.000 to 6000.000 MHz
> | | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB
> | | | | Bandwidth range: 160000000.0 to 160000000.0 step 0.0 Hz
> | | | | Connection Type: IQ
> | | | | Uses LO offset: No
> | | | _____________________________________________________
> | | | /
> | | | | RX Codec: B
> | | | | Name: ads62p48
> | | | | Gain range digital: 0.0 to 6.0 step 0.5 dB
> | | _____________________________________________________
> | | /
> | | | TX Dboard: A
> | | | ID: UBX-160 v1 (0x0079)
> | | | Serial: 31A0xxx
> | | | _____________________________________________________
> | | | /
> | | | | TX Frontend: 0
> | | | | Name: UBX TX
> | | | | Antennas: TX/RX, CAL
> | | | | Sensors: lo_locked
> | | | | Freq range: 10.000 to 6000.000 MHz
> | | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB
> | | | | Bandwidth range: 160000000.0 to 160000000.0 step 0.0 Hz
> | | | | Connection Type: QI
> | | | | Uses LO offset: No
> | | | _____________________________________________________
> | | | /
> | | | | TX Codec: A
> | | | | Name: ad9146
> | | | | Gain Elements: None
> | | _____________________________________________________
> | | /
> | | | TX Dboard: B
> | | | ID: UBX-160 v1 (0x0079)
> | | | Serial: 31A0xxx
> | | | _____________________________________________________
> | | | /
> | | | | TX Frontend: 0
> | | | | Name: UBX TX
> | | | | Antennas: TX/RX, CAL
> | | | | Sensors: lo_locked
> | | | | Freq range: 10.000 to 6000.000 MHz
> | | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB
> | | | | Bandwidth range: 160000000.0 to 160000000.0 step 0.0 Hz
> | | | | Connection Type: QI
> | | | | Uses LO offset: No
> | | | _____________________________________________________
> | | | /
> | | | | TX Codec: B
> | | | | Name: ad9146
> | | | | Gain Elements: None
> | | _____________________________________________________
> | | /
> | | | RFNoC blocks on this device:
> | | |
> | | | * DmaFIFO_0
> | | | * Radio_0
> | | | * Radio_1
> | | | * DDC_0
> | | | * DDC_1
> | | | * DUC_0
> | | | * DUC_1
>
> sml at sml-hp-b65a:~$
>
> Here an except from the ue.log:
>
> sml at sml-hp-b65a:~$ cat /tmp/ue.log
> 07:59:45.629027 [UE ] [I] Built in Release mode using commit c892ae56b on branch master.
> 07:59:45.706804 [RF ] [I] Configuring physical DL channel 0 with band-pass filter (0.0, 0.0)
> 07:59:45.706818 [RF ] [I] Configuring physical UL channel 0 with band-pass filter (0.0, 0.0)
> 07:59:47.386876 [RF ] [E] Error opening RF device
> 07:59:47.500038 [MAC ] [I] [ 0] Resetting MAC
> 07:59:47.503034 [MAC ] [D] [ 0] Msg3 buffer flushed
> 07:59:47.503049 [MAC ] [I] [ 0] Logical Channel Setup: LCID=0, LCG=0, priority=0, PBR=-1, BSD=50ms, bucket_size=0
> 07:59:47.503054 [MAC ] [I] [ 0] Logical Channel Setup: LCID=1, LCG=0, priority=1, PBR=-1, BSD=50ms, bucket_size=0
> 07:59:47.503062 [MAC ] [D] [ 0] After MAC reset:
> - lcid=0, lcg=0, prio=0, Bj=0, PBR=-1, BSD=50, buffer_len=0, sched_len=0
> - lcid=1, lcg=0, prio=1, Bj=0, PBR=-1, BSD=50, buffer_len=0, sched_len=0
> 07:59:47.503064 [MAC ] [I] [ 0] BSR: Configured timer reTX 2560 ms
> 07:59:47.503071 [RLC ] [I] Added radio bearer SRB0 in Transparent Mode
> 07:59:47.503072 [RLC ] [I] Configured radio bearer SRB0 in Transparent Mode
> 07:59:47.503075 [NAS ] [I] New state DEREGISTERED
> 07:59:47.503108 [USIM] [I] Read Home PLMN Id=26222
> 07:59:47.503172 [NAS ] [I] Read GUTI from file m_tmsi: d0c2ac97, mcc: 106, mnc: 16, mme_group_id: 1, mme_code: 1
> 07:59:47.503180 [NAS ] [I] Read security ctxt from file .ctxt. ksi: 1, k_asme: 392be0dcb559e2f54159362e8dcd58e75e02b24e1eceb77d55a576088bc37e1c, tx_count: 4, rx_count: 4, int_alg: 2, enc_alg: 0
> 07:59:47.503190 [NAS ] [D] NAS encryption key - k_nas_enc
> 0000: 97 80 a3 41 25 d8 57 0e f1 ca f7 06 5c 23 1b 74
> 0010: 12 b0 f2 6b ed e2 62 e2 ae bb 72 12 93 12 59 29
> 07:59:47.503195 [NAS ] [D] NAS integrity key - k_nas_int
> 0000: f9 78 39 58 42 5f d5 f6 05 d7 dc 9a 02 33 23 f7
> 0010: 4d 40 56 d4 38 8d 19 37 0d fa 52 98 08 4f 9e f7
> 07:59:47.503205 [RRC ] [I] using srand seed of 503204
> 07:59:48.034353 [PHY0] [E] [ 0] Error: Radio does not provide RF information
> 07:59:48.040594 [PHY0] [D] [ 0] SYNC: state=IDLE, tti=0
> 07:59:48.040605 [PHY0] [D] [ 0] Sleeping
> 07:59:48.040691 [NAS ] [I] Saved GUTI to file m_tmsi: d0c2ac97, mcc: 106, mnc: 16, mme_group_id: 1, mme_code: 1
> 07:59:48.040703 [NAS ] [I] Saved security ctxt to file .ctxt. ksi: 1, k_asme: 392be0dcb559e2f54159362e8dcd58e75e02b24e1eceb77d55a576088bc37e1c, tx_count: 4, rx_count: 4, int_alg: 2, enc_alg: 0
> 07:59:48.040756 [MAC ] [D] [ 0] Running MAC tti=0
> 07:59:48.040761 [MAC ] [D] [ 0] Update Bj: lcid=0, Bj=0
> 07:59:48.040763 [MAC ] [D] [ 0] Update Bj: lcid=1, Bj=0
> 07:59:48.040768 [MAC ] [D] [ 0] RA: INIT: rar_window_start=-1, rar_window_length=-1
> 07:59:48.041618 [PHY0] [D] [ 0] SYNC: state=IDLE, tti=1
> 07:59:48.041626 [PHY0] [D] [ 0] Sleeping
> Closing log
> sml at sml-hp-b65a:~$
>
>
> Here is how it looks if i try to start srsue:
>
> sml at sml-hp-b65a:~$ sudo ./srsue20.04.1 ue-v20.04-Xavier-VPN-Sky5-UHD.conf
> Reading configuration file ue-v20.04-Xavier-VPN-Sky5-UHD.conf...
>
> Built in Release mode using commit c892ae56b on branch master.
>
> Opening 2 channels in RF device=UHD with args=recv_frame_size=9232,send_frame_size=9232
> [INFO] [UHD] linux; GNU C++ version 7.4.0; Boost_106501; UHD_3.14.1.1-release
> [INFO] [LOGGING] Fastpath logging disabled at runtime.
> Opening USRP channels=2, args: recv_frame_size=9232,send_frame_size=9232,master_clock_rate=23.04e6
> [INFO] [X300] X300 initialization sequence...
> /home/sml/srsLTE/lib/src/phy/rf/rf_uhd_imp.c.187: Error opening UHD: code 43
>
> Error initializing radio.
> Waiting PHY to initialize ... done!
> Saving MAC PCAP file
> Saving NAS PCAP file (DLT=148)
> sml at sml-hp-b65a:~$
>
> Mit freundlichen Grüßen,
> Best regards,
>
> Marc Triefelder
>
> E-Mail: m.triefelder at gmail.com <mailto:m.triefelder at gmail.com>
>
>
>
>
>
> _______________________________________________
> srslte-users mailing list
> srslte-users at lists.softwareradiosystems.com <mailto:srslte-users at lists.softwareradiosystems.com>
> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users <http://www.softwareradiosystems.com/mailman/listinfo/srslte-users>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20200604/badee5d0/attachment.htm>
More information about the srsran-users
mailing list