[srslte-users] Rank Indicator reported value
Paul Matsagos
pavlosmats at gmail.com
Tue Jun 23 14:23:17 UTC 2020
Dear Havier thank you for your reply!
In the link below you will find the enb and ue log files:
https://drive.google.com/file/d/1SSz6c6YkzMnRlm0ed3zXQ1O753CW6uVs/view?usp=sharing
Thank you in advance!
Kind regards,
Paul
Στις Τρί, 23 Ιουν 2020 στις 8:34 π.μ., ο/η Xavier Arteaga <
xavier at softwareradiosystems.com> έγραψε:
> Hi Paul,
> The PCAP does not provide CSI reports. Could you provide the enb.log and
> ue.log with PHY level in info?
>
> Kind regards,
> Xavier
>
> On Mon, 22 Jun 2020 at 17:23, Paul Matsagos <pavlosmats at gmail.com> wrote:
>
>> Hello everyone,
>>
>> My name is Paul and I am a master student in telecommunications. I am
>> using srsLTE in order to simulate a LTE network and measure the performance
>> of it for my thesis.
>> I am using two USRPs X300 (one for the eNB and the other for the UE as
>> well as a smartphone) and I have configured the enb.conf file for MIMO
>> transmission in TM 4. Because the computers in my university aren't fast
>> enough to support PRB higher than 25, when I am using the second USRP as a
>> UE, I have set the PRB to 15 and when I am using the smartphone I have set
>> it to 25. In both cases I don't lose packets because of the performance of
>> my machines.
>> Although the reported values of CQI, SNR, MSC and RSRQ from both eNB and
>> UE are optimal because the distance between the eNB and UE is 3 meters with
>> line of site, the RI have always the same value which is 1. I have tried
>> different combinations of tx_gains and rx_gains in both sides but the RI
>> value doesn't change. Can you please help me?
>> The following link have the configuration files (enb.conf, ue.conf) as
>> well as a file with measurements from both the eNB and UE and the .pcap
>> files:
>> https://drive.google.com/file/d/1baxO6KJGcAAwZLmjIjNDswfytwF2c1cQ/view?usp=sharing
>> Thank you in advance!
>>
>> Best regards,
>> Paul
>> _______________________________________________
>> srslte-users mailing list
>> srslte-users at lists.softwareradiosystems.com
>> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20200623/bae2d945/attachment.htm>
More information about the srsran-users
mailing list