[srslte-users] Fwd: Volte using srsLTE

[Andre Puschmann]

VoLTE is not supported in srsEPC. Use open5gs [1] for that.


[1] https://github.com/open5gs/open5gs



On 4/3/20 5:28, salik satti wrote:
> 
> Hello,
> I have tested srsLTE with limesdr and OnePlus commercial phone for data
> services all right.
> 
> Any one tested Volte over srsepc ??
> I have read about nextepc supports volte with srsenb anyone tested?
> 
> also i have installed nextepc in one machine with IP: 192.168.1.1/24
> <http://192.168.1.1/24> and srsenb on other machine with IP:
> 192.168.1.2/24 <http://192.168.1.2/24> my enb configuration file:
> 
> [enb]
> enb_id = 0x19B
> cell_id = 0x01
> phy_cell_id = 1
> tac = 0x12345
> #ctrl_addr = 127.0.0.1
> mcc = 101
> mnc = 01
> mme_addr = 192.168.1.1
> gtp_bind_addr = 192.168.1.2
> s1c_bind_addr = 192.168.1.2
> n_prb = 25
> #tm = 4
> 
> I have setup mme.conf and nextepc.conf on machine 1 with:
> 
> |mme: gummei: plmn_id: mcc: 101 mnc: 01 mme_gid: 2 mme_code: 1 tai:
> plmn_id: mcc: 101 mnc: 01 tac: 12345
> 
> |
> 
> |nextepc started successfully and when i run srsenb on second machine i
> am geeting an error:
> 
> S1 Setup Failure. Cause: misc - unknown-PLMN
> 
> |
> 
> |and on Nextecpc:
> |
> 
> |s1 Setup Failure
> |
> 
> |Cannot find served TAI, check mme.tai configuration. connection refused.
> 
> |
> 
> |Anyone can help please on this.
> 
> |
> 
> |Regards,
> |
> 
> *Salik Mumtaz Satti,
> *
> *Skype: salik.satti6*
> 
> _______________________________________________
> srslte-users mailing list
> srslte-users at lists.softwareradiosystems.com
> http://www.softwareradiosystems.com/mailman/listinfo/srslte-users
>