[srslte-users] UHD Error: TuneVCO(CGEN) - failed to lock (cmphl!=3

[Bennett Gogarty]

Hello,
I have a LimeSDR USB and I receive an error when trying to run SRSENB. I
will paste the output from the tool in this message. I have searched
through google results but can't seem to find an answer as to why. Any help
would be appreciated. Here is the tool's output:

---  Software Radio Systems LTE eNodeB  ---

Reading configuration file /etc/srslte/enb.conf...

Built in RelWithDebInfo mode using 20.04.1.

Opening 1 channels in RF device=default with args=default
Opening USRP channels=1, args:
-- Make connection: 'LimeSDR-USB [USB 3.0] 90726074E263C'
-- Reference clock 30.72 MHz
-- Device name: LimeSDR-USB
-- Reference: 30.72 MHz
-- LMS7002M register cache: Disabled
-- RX LPF configured
-- Filter calibrated. Filter order-4th, filter bandwidth set to 23.04
MHz.Real pole 1st order filter set to 2.5 MHz. Preemphasis filter not active
-- TX LPF configured

UHD Error:
    TuneVCO(CGEN) - failed to lock (cmphl!=3)

UHD Error:
    SetFrequencyCGEN(368.64 MHz) failed

==== eNodeB started ===
Type <t> to view trace
-- RX LPF configured

UHD Error:
    setSampleRate(Rx, 0, 11.52 MHz) Failed
-- Filter calibrated. Filter order-4th, filter bandwidth set to 11.52
MHz.Real pole 1st order filter set to 2.5 MHz. Preemphasis filter not active
-- TX LPF configured
Setting frequency: DL=2685.0 Mhz, UL=2565.0 MHz for cc_idx=0
-- Tx calibration finished
-- Rx calibration finished
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20200528/a0707160/attachment.htm>