[srslte-users] S1 handover

[Francisco Paisana]

Hey,

The S1 and intra-eNB handover should work with COTS UEs. For the S1
Handover, you will need two RF front-ends to run as source and target enbs.
We support both intra-frequency and inter-frequency handover. For the
latter, you will have to set up the measurement gap period in the rr.conf
file.

Regards,
Francisco

On Tue, Jun 8, 2021 at 8:21 PM Modyngs <mobilebackup95 at gmail.com> wrote:

>
>
> Hi, I was reading the Handover application Note of SRS docs.
>
> Saw that the S1 Handover needs ZMQ( GRC Broker) to manage the gain and
> Handover procedure
>
>
> But is it possible not to use the ZMQ when you are testing with COTS UE?
>
> I can confirm that the procedure works with srsUE and GRC together, So can
> we just omit the srsUE & GRC and replace them with real UE and test the S1
> Handover without the GRC BROKER?
>
> Thanks
> _______________________________________________
> srslte-users mailing list
> srslte-users at lists.softwareradiosystems.com
> https://lists.softwareradiosystems.com/mailman/listinfo/srslte-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20210608/c79f880c/attachment.htm>