[srsran-users] Regarding Not able to use bladeRF with ubuntua app on windows 11

[waseem bhat]

Hello community,

I am not able to use bladeRF 2.0 micro xA5 on ubuntu app installed on windows 11.

Snapshot:
root at eNB:/home/bladeRF/host# lsusb
Bus 002 Device 004: ID 2cf0:5250 Nuand LLC bladeRF 2.0 micro
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

root at eNB:/home/bladeRF/host# bladeRF-cli -p

Description: Nuand bladeRF 2.0
Backend: libusb
Serial: cff93c6a1a5c40ee9642dc40334f2b2f
USB Bus: 2
USB Address: 4

However, when I try to use interactive mode, I get following error:
root at Ahsan-eNB:/home/ahsan_enb/repo/bladeRF/host# bladeRF-cli -i
[ERROR @ host/libraries/libbladeRF/src/board/bladerf2/bladerf2.c:457] FPGA size: 4244820
[ERROR @ host/libraries/libbladeRF/src/board/bladerf2/bladerf2.c:459] bladerf2_open: dev->backend->load_fpga(dev, buf, buf_size) failed: A memory allocation error occurred
Failed to open device (first available): A memory allocation error occurred
root at Ahsan-eNB:/home/ahsan_enb/repo/bladeRF/host#


I tried various methods but still the same error.
However, this SDR is working perfectly fine, if same procedure is done in virtualbox(ubuntu) on same windows 11.

This issue is only with the ubuntu app, I am not sure how to fix it. Need your suggestions.

//Thanks & regards,
Waseem Bhat
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20221212/bd926c1e/attachment-0001.htm>