[srsran-users] Which development environment do you use?
Aniket Joshi
aniketjoshi53 at gmail.com
Thu Jun 16 13:17:40 UTC 2022
Hello Andre,
Following observation regarding the srsRAN simulator please share your
comments when u r free.
a) While we run the test case then UE easily goes from active to idle state
but it's not go from Idle state to active. We have changed some parameters
but it's not successful. Please share your comments where we can change
parameters.
b) We are also trying to change the APN in ue.conf then the attach request
should be rejected but in that case Attach success and also in wireshark we
have seen only existing APN.
c) How to test the dedicated bearer with this tool.
d) UE does not initiate the service request.
e) Where we can change the timer (UE, eNodeB ) related to this tool.
f) UE inactivity timer option not able to be seen in this configuration.
h) Is there any possibilities for changing the NAS Non Delivery
functionality in this ue conf file.
Kindly share your comments...
Regards
Aniket Joshi
On Tue, Jun 14, 2022 at 12:36 PM Andre Puschmann <andre.puschmann at srs.io>
wrote:
> Hey Aniket,
>
> On 14/6/22 6:42, Aniket Joshi wrote:
> > Hello all,
> >
> > any update.....
>
> Note that this a community-driven discussion list. It's not a guaranteed
> within 24h support line.
>
> > It was the same issue after changing the file name in enb.conf then
> > UE attaches successfully with EPC. Thanks for your support. my query
> > regarding the srsRAN simulator as shown below.
> > srsRAN query:-
> >
> > a) Is it possible we can test multiUE with srsRAN simulator.
>
> Not with srsUE - it's a single UE. You can use other multi UE simulators
> (like Amarisoft UE) to attach to srsENB of course.
>
> > b) how to conduct advance test case Throughput, Handover apart from
> > basic attach-detach.
>
> Just run traffic between attach and detach. Use iperf for that for example.
>
> > c) Is there any automated script available to test these scenarios.
>
> No.
>
> > d) Is there any software and GUI tool for checking the ue conf for
> > check as real UE.
>
> No.
>
> Thanks
> Andre
>
> >
> > Please share your comments.
> >
> > Regards
> > Aniket Joshi
> >
> > On Mon, Jun 13, 2022 at 12:57 PM Andre Puschmann
> > <andre.puschmann at srs.io <mailto:andre.puschmann at srs.io>> wrote:
> >
> > Hey Aniket,
> >
> > it seems you're using a old enb.conf. The `drb_config` option
> > has been
> > renamed to `rb_config` a wile ago. Just update the enb.conf and
> you
> > should be good. Make sure to use current versions for all files.
> >
> > Thanks
> > Andre
> >
> > P.S.: Please try to avoid posting images to the mailing list.
> > Just copy
> > and paste the console text works fine.
> >
> > On 11/6/22 11:15, Aniket Joshi wrote:
> > > Hello all,
> > >
> > >
> > > I am getting the below error while building the LTE srsRAN.
> > It seems
> > > this file is not observed in the git repository.
> > >
> > > Please suggest how to resolve this issue.
> > >
> > > Error screen shot:-
> > >
> > >
> > > image.png
> > >
> > >
> > > Regards
> > > Aniket Joshi
> > >
> > >
> > >
> > >
> > > On Mon, Jun 6, 2022 at 8:31 PM Ahmad Oweis <oweis at ieee.org
> > <mailto:oweis at ieee.org>
> > > <mailto:oweis at ieee.org <mailto:oweis at ieee.org>>> wrote:
> > >
> > > Hi all,
> > >
> > > I was using VS Code to run and debug srsenb, and I had to
> > start
> > > vscode with "sudo", as otherwise, it won't run. Recently,
> > there was
> > > a new release of VS Code which does not work with sudo.
> > This was
> > > reported as a bug but it was closed without a fix
> > > (https://github.com/microsoft/vscode/issues/146847
> > <https://github.com/microsoft/vscode/issues/146847>
> > > <https://github.com/microsoft/vscode/issues/146847
> > <https://github.com/microsoft/vscode/issues/146847>>). I just
> > want to
> > > know how you guys are developing and debugging the code?
> > >
> > > Thank you
> > > --
> > > Ahmad Oweis
> > > _______________________________________________
> > > srsran-users mailing list
> > > srsran-users at lists.srsran.com
> > <mailto:srsran-users at lists.srsran.com>
> > <mailto:srsran-users at lists.srsran.com
> > <mailto:srsran-users at lists.srsran.com>>
> > > https://lists.srsran.com/mailman/listinfo/srsran-users
> > <https://lists.srsran.com/mailman/listinfo/srsran-users>
> > > <https://lists.srsran.com/mailman/listinfo/srsran-users
> > <https://lists.srsran.com/mailman/listinfo/srsran-users>>
> > >
> > >
> > > _______________________________________________
> > > srsran-users mailing list
> > > srsran-users at lists.srsran.com
> > <mailto:srsran-users at lists.srsran.com>
> > > https://lists.srsran.com/mailman/listinfo/srsran-users
> > <https://lists.srsran.com/mailman/listinfo/srsran-users>
> >
> >
> > --
> > Andre Puschmann
> >
> > Software Radio Systems (SRS)
> > https://www.srs.io <https://www.srs.io>
> > andre at srs.io <mailto:andre at srs.io>
> >
> > PGP/GnuPG key: 0x204A85DFEA324D58
> > fingerprint: 3924 1C60 D52E 81A2 1F2E 0C9D 204A 85DF EA32 4D58
> >
>
>
> --
> Andre Puschmann
>
> Software Radio Systems (SRS)
> https://www.srs.io
> andre at srs.io
>
> PGP/GnuPG key: 0x204A85DFEA324D58
> fingerprint: 3924 1C60 D52E 81A2 1F2E 0C9D 204A 85DF EA32 4D58
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20220616/ddca7660/attachment-0001.htm>
More information about the srsran-users
mailing list