[srsran-users] srsRAN:Can bladeRF 2.0 micro xA4 be used in 5G network?

[Aya Moheddine]

Im using too bladeRF and B210 mini with 5G-SA. I can see the network but
the UE is not able to register. MAC failure in the log file is present and
authentication failure too. And also I have negative values of  "pusch"  even
if it is set to 10 as suggested by documentation in enb.conf file.
Do you have any idea about this?

On Tue, Feb 21, 2023 at 12:09 PM Zishuai Cheng <chengzishuai at bupt.edu.cn>
wrote:

> Hi Adam,
>
> Not sure if the blaceRF causes this problem. I was setup 5G-SA using B210
> and PLMN 99970, and the UE failed to see the network. After changed PLMN to
> 00101, the UE suddenly saw the network and successfully connect to 5G-SA.
> Maybe you can give 00101 a try and find some luck.
>
> Zishuai
>
> On 2023/2/21 18:16, 乄 wrote:
>
> Hello everyone,
>
> I am using Open5gs+srsRAN to build a 5G network.
> I want to use bladeRF 2.0 micro xA4. But I found that after the network
> was set up, the phone could not find my network.
> Has anyone had success with bladeRF 2.0 micro xA4? Please let me know if
> it works or not.
>
> Thank you very much.
>
> Adam
>
> _______________________________________________
> srsran-users mailing listsrsran-users at lists.srsran.comhttps://lists.srsran.com/mailman/listinfo/srsran-users
>
> _______________________________________________
> srsran-users mailing list
> srsran-users at lists.srsran.com
> https://lists.srsran.com/mailman/listinfo/srsran-users
>


-- 
Regards,
Aya Moheddine, Ph.D
Postdoctoral Research Fellow at SCNL
Department of Electrical, Electronic and Telecommunications Engineering and
Naval Architecture (DITEN)
University of Genoa
https://www.scnl.diten.unige.it/people/post-doc-researchers/aya-moheddine
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20230221/b6a1ebdf/attachment.htm>