[srsran-users] install from source on Kali

Brendan McAuliffe brendan.mcauliffe at srs.io
Thu Feb 23 15:58:54 UTC 2023


Hi Rob,

If you take a look at the cmake output, you will see the following:

-- srsUE and srsENB/srsGNB builds disabled due to missing RF driver


To ensure that srsUE and srsENB are built correctly you need to have an RF
driver installed on your machine - this needs to be done *before *installing
srsRAN. You can find a list of supported RF drivers here
<https://docs.srsran.com/projects/4g/en/latest/general/source/1_installation.html#installation-from-source>
in the documentation. Install one of these, double check you have all of
the relevant dependencies, and try to build everything again.

If the issue persists, let me know.

Best regards,
Brendan

On Thu, 23 Feb 2023 at 16:45, Rob Hahn <rhahn at alarm.com> wrote:

> I printed the outputs these corresponding files.
>
> Thanks!
> ------------------------------
> *From:* Brendan McAuliffe <brendan.mcauliffe at srs.io>
> *Sent:* Thursday, February 23, 2023 9:46 AM
> *To:* Rob Hahn <rhahn at alarm.com>
> *Cc:* srsran-users at lists.srsran.com <srsran-users at lists.srsran.com>
> *Subject:* Re: [srsran-users] install from source on Kali
>
> Hi Rob,
>
> Can you share the output when you run cmake and make?
>
> Best regards,
> Brendan
>
> On Thu, 23 Feb 2023 at 15:42, Rob Hahn <rhahn at alarm.com> wrote:
>
> I installed srsran from source by following these instructions.
>
>
> https://docs.srsran.com/projects/4g/en/latest/general/source/1_installation.html
>
> I did not receive any errors and the installation was successful.
>
>
>
> However, I only see srsepc. It looks like srsenb wasn’t installed. Is this
> expected?
>
>
>
>
> _______________________________________________
> srsran-users mailing list
> srsran-users at lists.srsran.com
> https://lists.srsran.com/mailman/listinfo/srsran-users
>
>
>
> --
> Brendan McAuliffe
>
> User Success Associate
>
> Software Radio Systems, Ltd.
> brendan at srs.io
> www.srs.io
> Barcelona, Spain
> [image: twitter] <https://twitter.com/Brendan_SRS>
> [image: linkedin] <https://www.linkedin.com/in/bmcaulif/>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20230223/faec8e34/attachment.htm>


More information about the srsran-users mailing list