[srsran-users] install from source on Kali
Rob Hahn
rhahn at alarm.com
Thu Feb 23 16:20:36 UTC 2023
Thanks so much! I’ll give that a try.
Rob
From: Brendan McAuliffe <brendan.mcauliffe at srs.io>
Sent: Thursday, February 23, 2023 10:59 AM
To: Rob Hahn <rhahn at alarm.com>
Cc: srsran-users at lists.srsran.com
Subject: Re: [srsran-users] install from source on Kali
Hi Rob,
If you take a look at the cmake output, you will see the following:
-- srsUE and srsENB/srsGNB builds disabled due to missing RF driver
To ensure that srsUE and srsENB are built correctly you need to have an RF driver installed on your machine - this needs to be done before installing srsRAN. You can find a list of supported RF drivers here<https://docs.srsran.com/projects/4g/en/latest/general/source/1_installation.html#installation-from-source> in the documentation. Install one of these, double check you have all of the relevant dependencies, and try to build everything again.
If the issue persists, let me know.
Best regards,
Brendan
On Thu, 23 Feb 2023 at 16:45, Rob Hahn <rhahn at alarm.com<mailto:rhahn at alarm.com>> wrote:
I printed the outputs these corresponding files.
Thanks!
________________________________
From: Brendan McAuliffe <brendan.mcauliffe at srs.io<mailto:brendan.mcauliffe at srs.io>>
Sent: Thursday, February 23, 2023 9:46 AM
To: Rob Hahn <rhahn at alarm.com<mailto:rhahn at alarm.com>>
Cc: srsran-users at lists.srsran.com<mailto:srsran-users at lists.srsran.com> <srsran-users at lists.srsran.com<mailto:srsran-users at lists.srsran.com>>
Subject: Re: [srsran-users] install from source on Kali
Hi Rob,
Can you share the output when you run cmake and make?
Best regards,
Brendan
On Thu, 23 Feb 2023 at 15:42, Rob Hahn <rhahn at alarm.com<mailto:rhahn at alarm.com>> wrote:
I installed srsran from source by following these instructions.
https://docs.srsran.com/projects/4g/en/latest/general/source/1_installation.html
I did not receive any errors and the installation was successful.
However, I only see srsepc. It looks like srsenb wasn’t installed. Is this expected?
_______________________________________________
srsran-users mailing list
srsran-users at lists.srsran.com<mailto:srsran-users at lists.srsran.com>
https://lists.srsran.com/mailman/listinfo/srsran-users
--
Brendan McAuliffe
User Success Associate
Software Radio Systems, Ltd.
[https://cdn2.hubspot.net/hubfs/53/tools/email-signature-generator/icons/email-icon-2x.png]
brendan at srs.io<mailto:brendan at srs.io>
[https://cdn2.hubspot.net/hubfs/53/tools/email-signature-generator/icons/link-icon-2x.png]
www.srs.io<https://www.srs.io/>
[https://cdn2.hubspot.net/hubfs/53/tools/email-signature-generator/icons/address-icon-2x.png]
Barcelona, Spain
[https://ci3.googleusercontent.com/mail-sig/AIorK4w8zn-zT5Pe6Axd75ipM17U2XBdwm9CYBGMbZzXsqds4_xsLf14LiWJgqjSV2hysgDqz8e22bQ]
[twitter]<https://twitter.com/Brendan_SRS>
[linkedin]<https://www.linkedin.com/in/bmcaulif/>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.srsran.com/pipermail/srsran-users/attachments/20230223/0a39c7f1/attachment-0001.htm>
More information about the srsran-users
mailing list